[Federal Register Volume 70, Number 250 (Friday, December 30, 2005)]
[Notices]
[Pages 77391-77395]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: E5-8032]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPPT-2005-0552; FRL-7753-3]


Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires 
any person who intends to manufacture (defined by statute to include 
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to 
notify EPA and comply with the statutory provisions pertaining to the 
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of 
TSCA, EPA is required to publish a notice of receipt of a 
premanufacture notice (PMN) or an application for a test marketing 
exemption (TME), and to publish periodic status reports on the 
chemicals under review and the receipt of notices of commencement to 
manufacture those chemicals. This status report, which covers the 
period from November 17, 2005 to December 7, 2005, consists of the PMNs 
pending or expired, and the notices of commencement to manufacture a 
new chemical that the Agency has received under TSCA section 5 during 
this time period.

DATES: Comments, identified by the docket ID number EPA-HQ-OPPT-2005-
0552 and the specific PMN number or TME number, must be received on or 
before January 30, 2006.

ADDRESSES: Comments/may be submitted electronically, by mail, or 
through hand delivery/courier. Follow the detailed instructions as 
provided in Unit I. of the SUPPLEMENTARY INFORMATION.

FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator, 
Environmental Assistance Division, Office of Pollution Prevention and 
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania 
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; 
e-mail address: [email protected].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

    This action is directed to the public in general. As such, the 
Agency has not attempted to describe the specific entities that this 
action may apply to. Although others may be affected, this action 
applies directly to the submitter of the premanufacture notices 
addressed in the action. If you have any questions regarding the 
applicability of this action to a particular entity, consult the person 
listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Copies of this Document and Other Related Information?

    1. Docket. EPA has established an official public docket for this 
action under docket identification (ID) number EPA-HQ-OPPT-2005-0552. 
The official public docket consists of the documents specifically 
referenced in this action, any public comments received, and other 
information related to this action. Although a part of the official 
docket, the public docket does not include Confidential Business 
Information (CBI) or other information whose disclosure is restricted 
by statute. The official public docket is the collection of materials 
that is available for public viewing at the EPA Docket Center, Rm. 
B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, 
DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday 
through Friday, excluding legal holidays. The EPA Docket Center Reading 
Room telephone number is (202) 566-1744, and the telephone number for 
the OPPT Docket, which is located in the EPA Docket Center, is (202) 
566-0280.
    2. Electronic access. You may access this Federal Register document 
electronically through the EPA Internet under the ``Federal Register'' 
listings at http://www.epa.gov/fedrgstr/.
    EDOCKET, EPA's electronic public docket and comment system was 
replaced on November 25, 2005 by an enhanced federal-wide electronic 
docket management and comment system located at http://www.regulations.gov/. Follow the on-line instructions.
    An electronic version of the public docket is available through 
EPA's electronic public docket and comment system, EPA Dockets. You may 
use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public 
comments, access the index listing of the contents of the official 
public docket, and to access those documents in the public docket that 
are available electronically. Although not all docket materials may be 
available electronically, you may still access any of the publicly 
available docket materials through the docket facility identified in 
Unit I.B.1. Once in the system, select ``search,'' then key in the 
appropriate docket ID number.
    Certain types of information will not be placed in the EPA Dockets. 
Information claimed as CBI and other

[[Page 77392]]

information whose disclosure is restricted by statute, which is not 
included in the official public docket, will not be available for 
public viewing in EPA's electronic public docket. EPA's policy is that 
copyrighted material will not be placed in EPA's electronic public 
docket but will be available only in printed, paper form in the 
official public docket. To the extent feasible, publicly available 
docket materials will be made available in EPA's electronic public 
docket. When a document is selected from the index list in EPA Dockets, 
the system will identify whether the document is available for viewing 
in EPA's electronic public docket. Although not all docket materials 
may be available electronically, you may still access any of the 
publicly available docket materials through the docket facility 
identified in Unit I.B.1. EPA intends to work towards providing 
electronic access to all of the publicly available docket materials 
through EPA's electronic public docket.
    For public commenters, it is important to note that EPA's policy is 
that public comments, whether submitted electronically or in paper, 
will be made available for public viewing in EPA's electronic public 
docket as EPA receives them and without change, unless the comment 
contains copyrighted material, CBI, or other information whose 
disclosure is restricted by statute. When EPA identifies a comment 
containing copyrighted material, EPA will provide a reference to that 
material in the version of the comment that is placed in EPA's 
electronic public docket. The entire printed comment, including the 
copyrighted material, will be available in the public docket.
    Public comments submitted on computer disks that are mailed or 
delivered to the docket will be transferred to EPA's electronic public 
docket. Public comments that are mailed or delivered to the docket will 
be scanned and placed in EPA's electronic public docket. Where 
practical, physical objects will be photographed, and the photograph 
will be placed in EPA's electronic public docket along with a brief 
description written by the docket staff.

C. How and To Whom Do I Submit Comments?

    You may submit comments electronically, by mail, or through hand 
delivery/courier. To ensure proper receipt by EPA, identify the 
appropriate docket ID number and specific PMN number or TME number in 
the subject line on the first page of your comment. Please ensure that 
your comments are submitted within the specified comment period. 
Comments received after the close of the comment period will be marked 
``late.'' EPA is not required to consider these late comments. If you 
wish to submit CBI or information that is otherwise protected by 
statute, please follow the instructions in Unit I.D. Do not use EPA 
Dockets or e-mail to submit CBI or information protected by statute.
    1. Electronically. If you submit an electronic comment as 
prescribed in this unit, EPA recommends that you include your name, 
mailing address, and an e-mail address or other contact information in 
the body of your comment. Also include this contact information on the 
outside of any disk or CD ROM you submit, and in any cover letter 
accompanying the disk or CD ROM. This ensures that you can be 
identified as the submitter of the comment and allows EPA to contact 
you in case EPA cannot read your comment due to technical difficulties 
or needs further information on the substance of your comment. EPA's 
policy is that EPA will not edit your comment, and any identifying or 
contact information provided in the body of a comment will be included 
as part of the comment that is placed in the official public docket, 
and made available in EPA's electronic public docket. If EPA cannot 
read your comment due to technical difficulties and cannot contact you 
for clarification, EPA may not be able to consider your comment.
    i. EPA Dockets. Your use of EPA's electronic public docket to 
submit comments to EPA electronically is EPA's preferred method for 
receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket/, and follow the online instructions for submitting comments. 
Once in the system, select ``search,'' and then key in docket ID number 
EPA-HQ-OPPT-2005-0552. The system is an ``anonymous access'' system, 
which means EPA will not know your identity, e-mail address, or other 
contact information unless you provide it in the body of your comment.
    ii. E-mail. Comments may be sent by e-mail to [email protected], 
Attention: Docket ID Number EPA-HQ-OPPT-2005-0552 and PMN Number or TME 
Number. In contrast to EPA's electronic public docket, EPA's e-mail 
system is not an ``anonymous access'' system. If you send an e-mail 
comment directly to the docket without going through EPA's electronic 
public docket, EPA's e-mail system automatically captures your e-mail 
address. E-mail addresses that are automatically captured by EPA's e-
mail system are included as part of the comment that is placed in the 
official public docket, and made available in EPA's electronic public 
docket.
    iii. Disk or CD ROM. You may submit comments on a disk or CD ROM 
that you mail to the mailing address identified in Unit I.C.2. These 
electronic submissions will be accepted in WordPerfect or ASCII file 
format. Avoid the use of special characters and any form of encryption.
    2. By mail. Send your comments to: Document Control Office (7407M), 
Office of Pollution Prevention and Toxics (OPPT), Environmental 
Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-
0001.
    3. By hand delivery or courier. Deliver your comments to: OPPT 
Document Control Office (DCO) in EPA East Bldg., Rm. 6428, 1201 
Constitution Ave., NW., Washington, DC. Attention: Docket ID Number 
EPA-HQ-OPPT-2005-0552 and PMN Number or TME Number. The DCO is open 
from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. 
The telephone number for the DCO is (202) 564-8930.

D. How Should I Submit CBI to the Agency?

    Do not submit information that you consider to be CBI 
electronically through EPA's electronic public docket or by e-mail. You 
may claim information that you submit to EPA as CBI by marking any part 
or all of that information as CBI (if you submit CBI on disk or CD ROM, 
mark the outside of the disk or CD ROM as CBI and then identify 
electronically within the disk or CD ROM the specific information that 
is CBI). Information so marked will not be disclosed except in 
accordance with procedures set forth in 40 CFR part 2.
    In addition to one complete version of the comment that includes 
any information claimed as CBI, a copy of the comment that does not 
contain the information claimed as CBI must be submitted for inclusion 
in the public docket and EPA's electronic public docket. If you submit 
the copy that does not contain CBI on disk or CD ROM, mark the outside 
of the disk or CD ROM clearly that it does not contain CBI. Information 
not marked as CBI will be included in the public docket and EPA's 
electronic public docket without prior notice. If you have any 
questions about CBI or the procedures for claiming CBI, please consult 
the technical person listed under FOR FURTHER INFORMATION CONTACT.

[[Page 77393]]

E. What Should I Consider as I Prepare My Comments for EPA?

    You may find the following suggestions helpful for preparing your 
comments:
    1. Explain your views as clearly as possible.
    2. Describe any assumptions that you used.
    3. Provide copies of any technical information and/or data you used 
that support your views.
    4. If you estimate potential burden or costs, explain how you 
arrived at the estimate that you provide.
    5. Provide specific examples to illustrate your concerns.
    6. Offer alternative ways to improve the notice or collection 
activity.
    7. Make sure to submit your comments by the deadline in this 
document.
    8. To ensure proper receipt by EPA, be sure to identify the docket 
ID number assigned to this action and the specific PMN number you are 
commenting on in the subject line on the first page of your response. 
You may also provide the name, date, and Federal Register citation.

II. Why is EPA Taking this Action?

    Section 5 of TSCA requires any person who intends to manufacture 
(defined by statute to include import) a new chemical (i.e., a chemical 
not on the TSCA Inventory to notify EPA and comply with the statutory 
provisions pertaining to the manufacture of new chemicals. Under 
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a 
notice of receipt of a PMN or an application for a TME and to publish 
periodic status reports on the chemicals under review and the receipt 
of notices of commencement to manufacture those chemicals. This status 
report, which covers the period from November 17, 2005 to December 7, 
2005, consists of the PMNs pending or expired, and the notices of 
commencement to manufacture a new chemical that the Agency has received 
under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs

    This status report identifies the PMNs pending or expired, and the 
notices of commencement to manufacture a new chemical that the Agency 
has received under TSCA section 5 during this time period. If you are 
interested in information that is not included in the following tables, 
you may contact EPA as described in Unit II. to access additional non-
CBI information that may be available.
    In Table I of this unit, EPA provides the following information (to 
the extent that such information is not claimed as CBI) on the PMNs 
received by EPA during this period: the EPA case number assigned to the 
PMN; the date the PMN was received by EPA; the projected end date for 
EPA's review of the PMN; the submitting manufacturer; the potential 
uses identified by the manufacturer in the PMN; and the chemical 
identity.

                                            I. 36 Premanufacture Notices Received From: 11/17/05 to 12/07/05
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                                              Projected Notice End
              Case No.                    Received Date               Date           Manufacturer/Importer           Use                  Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-06-0137                            11/18/05                02/15/06                CBI                    (G) Adhesive           (G) Acrylic polymer
P-06-0138                            11/18/05                02/15/06                CBI                    (G) Adhesive           (G) Acrylic polymer
P-06-0139                            11/18/05                02/15/06                CBI                    (G) Adhesive           (G) Acrylic polymer
P-06-0140                            11/18/05                02/15/06                CBI                    (G) Adhesive           (G) Acrylic polymer
P-06-0141                            11/18/05                02/15/06                CBI                    (G) Open non-          (G) Polyurethane
                                                                                                             dispersive             resin
                                                                                                             (coatings)
P-06-0142                            11/18/05                02/15/06                CBI                    (G) Open non-          (G) Polyurethane
                                                                                                             dispersive             resin
                                                                                                             (coatings)
P-06-0143                            11/18/05                02/15/06                Hi-tech color Inc.     (G) Polyurethane       (G) Aliphatic
                                                                                                             resin for coating      polyurethane
                                                                                                             agent
P-06-0144                            11/18/05                02/15/06                CBI                    (G) Open non-          (G) Polyester
                                                                                                             dispersive (resin)     polyurethane
                                                                                                                                    modified mdi
P-06-0145                            11/21/05                02/18/06                CBI                    (G) Polymerization     (G) Polyoxyethylene
                                                                                                             additive               polyoxyalkylene
                                                                                                                                    monoalkenyl ether
P-06-0146                            11/23/05                02/20/06                CBI                    (S) Resin for          (G) Phenol, polymer
                                                                                                             semiconductor          with substituted
                                                                                                             encapsulation or       benzenre, glycidyl
                                                                                                             resin for laminated    ether
                                                                                                             sheets used in
                                                                                                             electronic materials
                                                                                                             / electric apparatus
P-06-0147                            11/23/05                02/20/06                CBI                    (G) Component of       (G) Cycloalkenyl
                                                                                                             fragrances for         ethanone
                                                                                                             functional household
                                                                                                             products e.g.
                                                                                                             cleaning agents, air
                                                                                                             fresheners and
                                                                                                             candles.
P-06-0148                            11/29/05                02/26/06                Phoenix Chemical Inc.  (G) beade up agent     (S) Amides, c18-
                                                                                                             for car wash           unsaturated, dimers,
                                                                                                             (industrial)           hydrogenated, n,n'-
                                                                                                                                    bis [3-
                                                                                                                                    (dimethylamino)propy
                                                                                                                                    l]
P-06-0149                            11/22/05                02/19/06                Itochu Chemicals       (G) Physical           (S) Potassium
                                                                                      America, Inc.          characteristics        titanium oxide
                                                                                                             modifier for
                                                                                                             industrial use in
                                                                                                             certain solid
                                                                                                             composite articles
P-06-0150                            11/29/05                02/26/06                CBI                    (G) Contained use in   (G) Ethenylbenzene -
                                                                                                             crude oil              acrylate ester
                                                                                                             production.            polymer
P-06-0151                            11/30/05                02/27/06                CBI                    (S) Additive in        (G) Quadruplicate
                                                                                                             rubber, i.e. as        copolymer from 1,3-
                                                                                                             reinforcing agent      butadiene and
                                                                                                                                    ethenylbenzene and
                                                                                                                                    trimethylolpropane
                                                                                                                                    trimethacrylate and
                                                                                                                                    2-propenoic acid, 2-
                                                                                                                                    methyl; 2-
                                                                                                                                    hydroxyethyl ester.
P-06-0152                            11/30/05                02/27/06                CBI                    (G) Spacer in          (S) 2-propenoic acid,
                                                                                                             electronic parts       2,2-bis[[(1-oxo-2-
                                                                                                                                    propenyl)oxy]methyl]-
                                                                                                                                    1,3-propanediyl
                                                                                                                                    ester, polymer with
                                                                                                                                    diethenylbenzene and
                                                                                                                                    ethenylethylbenzene

[[Page 77394]]

 
P-06-0153                            12/01/05                02/28/06                CBI                    (G) Reactant           (G) Iso-tridecanol
P-06-0154                            12/01/05                02/28/06                Hi-Tech Color Inc.     (G) Heat-resistant     (G) Silicone-polyol
                                                                                                             and slide of thermal-
                                                                                                             transfer sheet (back
                                                                                                             coating agent)
P-06-0155                            12/01/05                02/28/06                CBI                    (S) Ultra violet       (G) Aromatic
                                                                                                             electron beam          tetracarbonyl
                                                                                                             curable resin for      compound polymer
                                                                                                             ultra violet/          with 5-isocyanato-1-
                                                                                                             electron beam          (isocyanatomethyl)-
                                                                                                             curable applications   1,3,3-trimethyl
                                                                                                             (e.g. adhesives,       cyclohexane, 2-
                                                                                                             coatings, inks)        hydroxyethyl
                                                                                                                                    acrylate- and 2-
                                                                                                                                    oxepanone
                                                                                                                                    homopolymer 2-[(1-
                                                                                                                                    oxo-2-
                                                                                                                                    propenyl)oxy]ethyl
                                                                                                                                    ester-blocked
P-06-0156                            12/02/05                03/01/06                Degussa Corporation    (S) Reactive hot melt  (S) Silane,
                                                                                                             in the autmotive       ethenyltrimethoxy-,
                                                                                                             industry; reactive     reaction products
                                                                                                             hot melt in the        with 1-butene-
                                                                                                             building sector;       ethylene-propene
                                                                                                             reactive hot melt in   polymer
                                                                                                             the plastic
                                                                                                             manufacturing
P-06-0157                            12/01/05                02/28/06                Chryso, Inc.           (S) Grinding aid for   (G) Organic acid salt
                                                                                                             portland cement,       of an
                                                                                                             limestone and other    alkylalkanolamine
                                                                                                             minerals
P-06-0158                            12/01/05                02/28/06                Chryso, Inc.           (S) Grinding aid for   (G) Organic acid salt
                                                                                                             portland cement,       of an
                                                                                                             limestone and other    alkylalkanolamine
                                                                                                             minerals
P-06-0159                            12/01/05                02/28/06                Chryso, Inc.           (S) Grinding aid for   (G) Organic acid salt
                                                                                                             portland cement,       of an
                                                                                                             limestone and other    alkylalkanolamine
                                                                                                             minerals               ethoxylate
P-06-0160                            12/01/05                02/28/06                Chryso, Inc.           (S) Grinding aid for   (G) Organic acid salt
                                                                                                             portland cement,       of an ethoxylated
                                                                                                             limestone and other    alkanolamine
                                                                                                             minerals
P-06-0161                            12/01/05                02/28/06                Chryso, Inc.           (S) Grinding aid for   (G) Organic acid salt
                                                                                                             portland cement,       of an alkanolamine
                                                                                                             limestone and other
                                                                                                             minerals
P-06-0162                            12/05/05                03/04/06                CBI                    (G) Hot melt adhesive  (G) Isocyanate
                                                                                                                                    functional urethane
                                                                                                                                    prepolymer
P-06-0163                            12/05/05                03/04/06                Biolandes, inc         (S) In fragrance       (S) Extractives and
                                                                                                             compositions in        their physically
                                                                                                             cosmestics, air        modified
                                                                                                             fresheners,            derivatives. Oils,
                                                                                                             household cleaners,    ginger, zingber
                                                                                                             diswashing and         purpurem
                                                                                                             laundry
P-06-0164                            12/05/05                03/04/06                CBI                    (G) Intermediate used  (G) Halogenated
                                                                                                             in electronics         aromatic anhydride
                                                                                                                                    copolymer
P-06-0165                            12/05/05                03/04/06                CBI                    (G) Binder used in     (G) Halogenated
                                                                                                             electronics            aromatic anhydride
                                                                                                             manufacture            copolymer
P-06-0166                            12/05/05                03/04/06                CBI                    (S) Chemical           (S) 3h-1,2,4-triazol-
                                                                                                             intermediate           3-one, 1,2-dihydro-
P-06-0167                            12/05/05                03/04/06                CBI                    (G) Chemical process   (G) Substituted
                                                                                                             intemediate (a         benzoic acid ester
                                                                                                             destructive use)
P-06-0168                            12/07/05                03/06/06                CBI                    (G) Additve, open,     (G) Copolymer of
                                                                                                             non-dispersive use     alkylacrylate and
                                                                                                                                    modified
                                                                                                                                    methylacrylate
P-06-0169                            12/07/05                03/06/06                Dexter Chemical LLC    (G) Surfactant and     (S) Phosphoric acid,
                                                                                                             corrosion inhibiting   isooctyl ester,
                                                                                                             additive for           ammonium salt
                                                                                                             waterborne coatings
P-06-0170                            12/07/05                03/06/06                CBI                    (G) Additive, open,    (G) Dicarboxylic acid
                                                                                                             non-dispersive use     ester, polymer with
                                                                                                                                    styrene,
                                                                                                                                    maleicanhydride and
                                                                                                                                    methyacrylate,
                                                                                                                                    compound with amine
P-06-0171                            12/07/05                03/06/06                CBI                    (G) Additive, open,    (G) Styrene-maleic
                                                                                                             non-dispersive use     acid copolymer,
                                                                                                                                    amine salt
P-06-0176                            12/06/05                03/05/06                CBI                    (G) Acrylate ester     (G) Chemical
                                                                                                                                    intemediate, inks
--------------------------------------------------------------------------------------------------------------------------------------------------------

    In Table II of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the 
Notices of Commencement to manufacture received:

                            II. 20 Notices of Commencement From: 11/17/05 to 12/07/05
----------------------------------------------------------------------------------------------------------------
                                                                Commencement Notice
              Case No.                     Received Date             End Date                  Chemical
----------------------------------------------------------------------------------------------------------------
P-01-0814                             11/23/05                11/02/05                (G) Polyacrylic resin,
                                                                                       based on hydroxyethyl
                                                                                       methacrylate
P-02-0536                             11/23/05                11/14/05                (G) Cyclic diol
P-02-0743                             12/01/05                11/10/05                (G) Modified polyolefin
P-04-0542                             11/21/05                10/26/05                (G) Formaldehyde polymers
                                                                                       with phenol, long chain
                                                                                       alkyl phenol and
                                                                                       resorcinol
P-04-0620                             12/07/05                11/16/05                (S) Fatty acids, C18-
                                                                                       unsaturated., dimers,
                                                                                       polymers with C36-
                                                                                       alkylenediamines,
                                                                                       ethylenediamine,
                                                                                       polypropylene glycol
                                                                                       diamine and sebacic acid
P-04-0784                             11/21/05                11/10/05                (G) 4,4' mdi based
                                                                                       polyurethane polymer

[[Page 77395]]

 
P-04-0808                             11/25/05                11/17/05                (G) Aromatic thermoplastic
                                                                                       polyurethane
P-05-0002                             11/28/05                11/16/05                (G) Methyl cyano amino
                                                                                       ethyl ether
P-05-0010                             11/28/05                11/20/05                (G) Trimethyl bis
                                                                                       alkylamine bis
                                                                                       (aminoethyl) ether
P-05-0119                             11/30/05                10/05/05                (G)
                                                                                       Allylpolyalkylenglycolsul
                                                                                       fate, ammonium salt
P-05-0152                             11/23/05                11/14/05                (G) Polydimethyl alkyl
                                                                                       methyl siloxane
P-05-0366                             11/25/05                11/09/05                (G) Substituted
                                                                                       phenylsulfonyl,
                                                                                       substituted acid chloride
P-05-0405                             11/25/05                11/12/05                (G) Substituted
                                                                                       phenylsulfonyl,
                                                                                       halosubstituted benzamide
P-05-0432                             11/22/05                07/01/05                (G) Alkanedioic acid,
                                                                                       polymer with amine,
                                                                                       alkanediols,
                                                                                       caprolactone, dialkyl
                                                                                       ester of sulfated
                                                                                       aromatic dicarboxylic
                                                                                       acid, sodium salt,
                                                                                       hydroxy substituted
                                                                                       alkane, isocyanates and
                                                                                       alkanetriol.
P-05-0449                             11/18/05                10/18/05                (G) Epoxidized soya oil
                                                                                       reaction products with
                                                                                       alcohol
P-05-0509                             11/21/05                11/09/05                (G) Isocyanate functional
                                                                                       urethane polymer
P-05-0555                             11/30/05                11/16/05                (S) Dodecanedioic acid,
                                                                                       dihydrazide
P-05-0601                             11/30/05                11/07/05                (G) Ethoxylated bis
                                                                                       (hydroxysubstituted)
                                                                                       alkane
P-05-0671                             11/22/05                11/16/05                (G) Alkyl imide condensate
                                                                                       of chloro triaryl diamine
                                                                                       dione
P-05-0672                             11/21/05                10/28/05                (S) Cyclohexadecanone,
                                                                                       .beta.(or 9)-methyl-,
                                                                                       didehydro derivative
P-05-0696                             12/06/05                11/15/05                (G) Polyether polyurethane
                                                                                       derivative polymer
P-05-0702                             11/21/05                11/08/05                (G) Sulphonated azo dye
----------------------------------------------------------------------------------------------------------------

List of Subjects

    Environmental Protection, Chemicals, Premanufacturer Notices.

    Dated: December 22, 2005.
Carolyn Thornton,
Acting Director, Information Management Division, Office of Pollution 
Prevention and Toxics.
[FR Doc. E5-8032 Filed 12-29-05; 8:45 am]
BILLING CODE 6560-50-S