[Federal Register Volume 70, Number 234 (Wednesday, December 7, 2005)]
[Notices]
[Pages 72787-72788]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 05-23739]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

(A-427-816)


Revocation of Antidumping Duty Order: Certain Cut-To-Length 
Carbon-Quality Steel Plate from France

AGENCY: Import Administration, International Trade Administration, 
Department of Commerce.
SUMMARY: Pursuant to section 751(c) of the Tariff Act of 1930, as 
amended (``the Act''), the International Trade Commission (``ITC''), in 
its sunset review, determined that revocation of the antidumping duty 
(``AD'') order on certain cut-to-length carbon-quality steel plate 
(``CTL Plate'') from France would not be likely to lead to continuation 
or recurrence of material injury to an industry in the United States 
within a reasonably foreseeable time. See Cut-to-Length Carbon-Quality 
Steel Plate from France, India, Indonesia, Italy, Japan, and Korea, 70 
FR 71331 (November 28, 2005) (``ITC Determination''). Therefore, 
pursuant to section 751(d)(2) of the Act and 19 CFR 351.222(i)(1)(iii), 
the Department is revoking the AD order on CTL Plate from France.

EFFECTIVE DATE: February 10, 2005.

FOR FURTHER INFORMATION CONTACT: David Goldberger, AD/CVD Operations, 
Import Administration, International Trade Administration, U.S. 
Department of Commerce, 14th Street and Constitution Avenue, NW, 
Washington, DC 20230; telephone: (202) 482-4136.

SUPPLEMENTARY INFORMATION:

Background

    On February 10, 2000, the Department published its AD order and 
final amended determination on CTL Plate from France. See Notice of 
Amendment of Final Determinations of Sales at Less Than Fair Value and 
Antidumping Duty Orders: Certain Cut-To- Length Carbon-Quality Steel 
Plate Products From France, India, Indonesia, Italy, Japan, and the 
Republic of Korea, 65 FR 6585 (February 10, 2000). In the amended final 
determination the Department found a margin of 10.41 percent for Usinor 
S.A. and for ``all other'' manufacturers/producers/exporters of CTL 
Plate from France.
    On January 3, 2005, the Department initiated, and the ITC 
instituted, sunset reviews of the AD order on CTL Plate from France. 
See Initiation of Five-year (Sunset) Reviews, 70 FR 75 (January 3, 
2005). As a result of its review, the Department found that revocation 
of the AD order would likely lead to continuation or recurrence of 
dumping, and notified the ITC of the dumping rate likely to prevail if 
the AD order were revoked. See Certain Cut-To-Length Carbon-Quality 
Steel Plate from France, India, Indonesia, Italy, Japan, and the 
Republic of Korea; Final Results of the Expedited Sunset Reviews of the 
Antidumping Duty Orders, 70 FR 45655 (August 8, 2005).
    On November 21, 2005, the ITC determined, pursuant to section 
751(c) of the Act, that revocation of the AD order on CTL Plate from 
France would not be likely to lead to continuation or recurrence of 
material injury to an industry in the United States within a reasonably 
foreseeable time. See ITC Determination and USITC Publication 3816 
(November 2005), entitled Cut-to-Length Carbon-Quality Steel Plate From 
France, India, Indonesia, Italy, Japan, and Korea: Investigation Nos. 
701-TA-388-391 and 731-TA-816-821 (Review).

Scope of the Order

    The products covered by the AD order are certain hot-rolled carbon-
quality steel: (1) Universal mill plates (i.e., flat-rolled products 
rolled on four faces or in a closed box pass, of a width exceeding 150 
mm but not exceeding 1250 mm, and of a nominal or actual thickness of 
not less than 4 mm, which are cut-to-length (not in coils) and without 
patterns in relief), of iron or non-alloy-quality steel; and (2) flat-
rolled products, hot-rolled, of a nominal or actual thickness of 4.75 
mm or more and of a width which exceeds 150 mm and measures at least 
twice the thickness, and which are cut-to-length (not in coils). Steel 
products to be included in the scope of this order are of rectangular, 
square, circular or other shape and of rectangular or non-rectangular 
cross-section where such non-rectangular cross-section is achieved 
subsequent to the rolling process (i.e., products which have been 
``worked after rolling'')--for example, products which have been 
beveled or rounded at the edges. Steel products that meet the noted 
physical characteristics that are painted, varnished or coated with 
plastic or other non-metallic substances are included within this 
scope. Also, specifically included in the scope of this order are high 
strength, low alloy (``HSLA'') steels. HSLA steels are recognized as 
steels with micro-alloying levels of elements such as chromium, copper, 
niobium, titanium, vanadium, and molybdenum.
    Steel products included in this scope, regardless of Harmonized 
Tariff Schedule of the United States (``HTSUS'') definitions, are 
products in which: (1) Iron predominates, by weight, over each of the 
other contained elements, (2) the carbon content is two percent or 
less, by weight, and (3) none of the elements listed below is equal to 
or exceeds the quantity, by weight, respectively indicated: 1.80 
percent of manganese, or 1.50 percent of silicon, or 1.00 percent of 
copper, or 0.50 percent of aluminum, or 1.25 percent of chromium, or 
0.30 percent of cobalt, or 0.40 percent of lead, or 1.25 percent of 
nickel, or 0.30 percent of tungsten, or 0.10 percent of molybdenum, or 
0.10 percent of niobium, or 0.41 percent of titanium, or 0.15 percent 
of vanadium, or 0.15 percent zirconium. All products that meet the 
written physical description, and in which the chemistry quantities do 
not equal or exceed any one of the levels listed above, are within the 
scope of this order unless otherwise

[[Page 72788]]

specifically excluded. The following products are specifically excluded 
from this order: (1) Products clad, plated, or coated with metal, 
whether or not painted, varnished or coated with plastic or other non-
metallic substances; (2) SAE grades (formerly AISI grades) of series 
2300 and above; (3) products made to ASTM A710 and A736 or their 
proprietary equivalents; (4) abrasion-resistant steels (i.e., USS AR 
400, USS AR 500); (5) products made to ASTM A202, A225, A514 grade S, 
A517 grade S, or their proprietary equivalents; (6) ball bearing 
steels; (7) tool steels; and (8) silicon manganese steel or silicon 
electric steel.
    The merchandise subject to this order is currently classifiable in 
the HTSUS under subheadings: 7208.40.3030, 7208.40.3060, 7208.51.0030, 
7208.51.0045, 7208.51.0060, 7208.52.0000, 7208.53.0000, 7208.90.0000, 
7210.70.3000, 7210.90.9000, 7211.13.0000, 7211.14.0030, 7211.14.0045, 
7211.90.0000, 7212.40.1000, 7212.40.5000, 7212.50.0000, 7225.40.3050, 
7225.40.7000, 7225.50.6000, 7225.99.0090, 7226.91.5000, 7226.91.7000, 
7226.91.8000, 7226.99.0000. Although the HTSUS subheadings are provided 
for convenience and customs purposes, the written description of the 
merchandise covered by this order is dispositive.

Determination

    As a result of the determination by the ITC that revocation of this 
AD order is not likely to lead to continuation or recurrence of 
material injury to an industry in the United States, the Department, 
pursuant to section 751(d) of the Act, is revoking the AD order on CTL 
Plate from France. Pursuant to section 751(d)(2) of the Act and 19 CFR 
351.222(i)(2)(i), the effective date of revocation is February 10, 2005 
(i.e., the fifth anniversary of the date of publication in the Federal 
Register of the notice of the AD order). The Department will notify 
U.S. Customs and Border Protection to discontinue suspension of 
liquidation and collection of cash deposits on entries of the subject 
merchandise entered or withdrawn from warehouse on or after February 
10, 2005, the effective date of revocation of the AD order. The 
Department will complete any pending administrative reviews of this 
order and will conduct administrative reviews of subject merchandise 
entered prior to the effective date of revocation in response to 
appropriately filed requests for review.
    This five-year (``sunset'') review and notice are in accordance 
with section 751(d)(2) and published pursuant to section 777(i)(1) of 
the Act.

    Dated: November 30, 2005.
Stephen J. Claeys,
Acting Assistant Secretary for Import Administration.
[FR Doc. 05-23739 Filed 12-6-05; 8:45 am]
BILLING CODE 3510-DS-S