[Federal Register Volume 70, Number 214 (Monday, November 7, 2005)]
[Notices]
[Pages 67422-67427]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 05-22147]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

A-201-830


Preliminary Results of Antidumping Duty Administrative Review: 
Carbon and Alloy Steel Wire Rod from Mexico

AGENCY: Import Administration, International Trade Administration, 
Department of Commerce.
SUMMARY: In response to requests by interested parties, the Department 
of Commerce (``the Department'') is conducting an administrative review 
of the antidumping duty order on carbon and alloy steel wire rod 
(``wire rod'') from Mexico for the period of review (``POR'') October 
1, 2003, through September 30, 2004.
    We preliminarily determine that during the POR, Hylsa Puebla, S.A. 
de C.V. (``Hylsa Puebla'') and Siderurgica Lazaro Cardenas Las Truchas 
S.A. de C.V., and its affiliate, CCC Steel GmbH, collectively 
(``SICARTSA'') sold subject merchandise at less than normal value 
(``NV''). If these preliminary results are adopted in the final results 
of this administrative review, we will instruct U.S. Customs and Border 
Protection (``CBP'') to assess antidumping duties equal to the 
difference between the export price (``EP'') and NV.

EFFECTIVE DATE: November 7, 2005.

FOR FURTHER INFORMATION CONTACT: Tipten Troidl or Jolanta Lawska at 
(202) 482-1767 or (202) 482-8362, respectively, AD/CVD Operations, 
Office 3, Import Administration, Room 1870, International Trade 
Administration, U.S. Department of Commerce, 14th Street and 
Constitution Avenue, NW, Washington, DC 20230.

SUPPLEMENTARY INFORMATION:

Background

    On October 29, 2002, the Department published in the Federal 
Register the antidumping duty order on wire rod from Mexico; see Notice 
of Antidumping Duty Orders: Carbon and Certain Alloy Steel Wire Rod 
from Brazil, Indonesia, Mexico, Moldova, Trinidad and Tobago, and 
Ukraine, 67 FR 65945 (October 29,2002). On October 1, 2004, we 
published in the Federal Register the notice of Antidumping or 
Countervailing Duty Order, Finding, or Suspended Investigation: 
Opportunity To Request Administrative Review, 69 FR 58889 (October 1, 
2004).
    On October 18, 2004, we received a request for review from 
SICARTSA: On October 27, 2004, we received a request for review from 
petitioners,\1\ with respect to Hylsa Puebla and Sicartsa: On October 
29, 2004, Hylsa Puebla and its

[[Page 67423]]

parent company Hylsamex, S.A. de C.V. (``Hylsamex''),\2\ requested a 
review. These reviews were requested in accordance with 19 CFR 
351.213(b)(2).
---------------------------------------------------------------------------

    \1\ The petitioners are ISG Georgetown (formerly Georgetown 
Steel Company), Gerdau Ameristeel U.S., Inc., (formely Co-Steel 
Raritan), Keystone Consolidated Industries, Inc., and North Star 
Steel Texas, Inc.
    \2\ Hylsa Puebla is a wholly-owned subsidiary of Hylsa, S.A. de 
C.V., which in turn is wholly-owned by Hylsamex, a Mexican holding 
company.
---------------------------------------------------------------------------

    On November 19, 2004, we published the notice of initiation of this 
antidumping duty administrative review covering the period October 1, 
2003, through September 30, 2004. See Initiation of Antidumping and 
Countervailing Duty Administrative Reviews, 69 FR 67701 (November 19, 
2003).
    During the most recently completed segment of the proceeding in 
which SICARTSA participated, the Department found and disregarded sales 
that failed the cost test.\3\ Pursuant to section 773(b)(2)(A)(ii) of 
the Tariff Act of 1930, as amended (``the Act''), we had reasonable 
grounds to believe or suspect that sales by SICARTSA of the foreign 
like product under consideration for the determination of NV in this 
review were made at prices below the cost of production (``COP''). 
Therefore, we initiated a cost investigation of SICARTSA, and 
instructed the company to fill out sections A-D\4\ of our initial 
questionnaire which was issued on December 9, 2003. SICARTSA submitted 
sections A-C on January 28, 2005, and its section D on February 11, 
2005.
---------------------------------------------------------------------------

    \3\ The most recently completed segment in which SICARTSA 
participated was the first administrative review. See Notice of 
Final Results of Antidumping Duty Administrative Review: Carbon and 
Certain Alloy Steel Wire Rod from Mexico, 70 FR 25809 (May 16, 2005) 
(``First Review of Wire Rod from Mexico'').
    \4\ Section A: Organization, Accounting Practices, Markets and 
Merchandise
    Section B: Comparison Market Sales
    Section C: Sales to the United States
    Section D: Cost of Production and Constructed Value
---------------------------------------------------------------------------

    On February 24, 2005, petitioners submitted a sales-below-cost 
allegation against Hylsa Puebla. We determined that petitioners' cost 
allegations provided a reasonable basis to initiate a COP investigation 
of Hylsa Puebla's sales. See Letter from Petitioners alleging below-
cost sales by Hylsa Puebla, dated February 24, 2005, in the case file 
in the Central Records Unit (``CRU''), main Commerce building, room B-
099. Also, on July 7, 2005, we informed Hylsa Puebla that it was 
required to respond to section D of the antidumping questionnaire. See 
Letter from the Department to Hylsa Puebla requiring a section D 
questionnaire response, dated July 7, 2005, in the CRU. On August 8, 
2005, Hylsa Puebla submitted its response to the section D 
questionnaire.
    On April 26, 2005, the Department published an extension of 
preliminary results for this review, extending the preliminary results 
until October 31, 2005. See Carbon and Certain Alloy Steel Wire Rod: 
Extension of Preliminary Results of Antidumping Duty Administrative 
Review, 70 FR 321395 (April 26, 2005).
    On June 20, 2005, the Department issued a supplemental section A-D 
questionnaire to SICARTSA. We received SICARTSA's response to the 
section A-D supplemental questionnaire on July 15, 2005. On August 8, 
2005, the Department issued a supplemental section A-C questionnaire to 
Hylsa Puebla. On September 8, 2005, we issued Hylsa Puebla a 
supplemental section D questionnaire. We received the response to Hylsa 
Puebla's section A-C supplemental questionnaire on September 6, 2005, 
and a response to the section D supplemental questionnaire on September 
30, 2005.
    On October 17, 2005, we issued an additional supplemental 
questionnaire to SICARTSA pertaining to the company's level of trade 
(``LOT'') in the home and U.S. markets. Because we did not receive 
SICARTSA's questionnaire response until October 25, 2005, we are not 
incorporating the information in its response in these preliminary 
results. We invite interested parties to comment on how the Department 
should incorporate the information from SICARTA's October 25, 2005, 
questionnaire response into the final results.

Scope of Review

    The merchandise subject to this order is certain hot-rolled 
products of carbon steel and alloy steel, in coils, of approximately 
round cross section, 5.00 mm or more, but less than 19.00 mm, in solid 
cross-sectional diameter.
    Specifically excluded are steel products possessing the above-noted 
physical characteristics and meeting the Harmonized Tariff Schedule of 
the United States (``HTSUS'') definitions for (a) stainless steel; (b) 
tool steel; c) high nickel steel; (d) ball bearing steel; and (e) 
concrete reinforcing bars and rods. Also excluded are (f) free 
machining steel products (i.e., products that contain by weight one or 
more of the following elements: 0.03 percent or more of lead, 0.05 
percent or more of bismuth, 0.08 percent or more of sulfur, more than 
0.04 percent of phosphorus, more than 0.05 percent of selenium, or more 
than 0.01 percent of tellurium).
    Also excluded from the scope are 1080 grade tire cord quality wire 
rod and 1080 grade tire bead quality wire rod. This grade 1080 tire 
cord quality rod is defined as: (i) grade 1080 tire cord quality wire 
rod measuring 5.0 mm or more but not more than 6.0 mm in cross-
sectional diameter; (ii) with an average partial decarburization of no 
more than 70 microns in depth (maximum individual 200 microns); (iii) 
having no non-deformable inclusions greater than 20 microns and no 
deformable inclusions greater than 35 microns; (iv) having a carbon 
segregation per heat average of 3.0 or better using European Method NFA 
04-114; (v) having a surface quality with no surface defects of a 
length greater than 0.15 mm; (vi) capable of being drawn to a diameter 
of 0.30 mm or less with 3 or fewer breaks per ton, and (vii) containing 
by weight the following elements in the proportions shown: (1) 0.78 
percent or more of carbon, (2) less than 0.01 percent of aluminum, (3) 
0.040 percent or less, in the aggregate, of phosphorus and sulfur, (4) 
0.006 percent or less of nitrogen, and (5) not more than 0.15 percent, 
in the aggregate, of copper, nickel and chromium.
    This grade 1080 tire bead quality rod is defined as: (i) grade 1080 
tire bead quality wire rod measuring 5.5 mm or more but not more than 
7.0 mm in cross-sectional diameter; (ii) with an average partial 
decarburization of no more than 70 microns in depth (maximum individual 
200 microns); (iii) having no non-deformable inclusions greater than 20 
microns and no deformable inclusions greater than 35 microns; (iv) 
having a carbon segregation per heat average of 3.0 or better using 
European Method NFA 04-114; (v) having a surface quality with no 
surface defects of a length greater than 0.2 mm; (vi) capable of being 
drawn to a diameter of 0.78 mm or larger with 0.5 or fewer breaks per 
ton; and (vii) containing by weight the following elements in the 
proportions shown: (1) 0.78 percent or more of carbon, (2) less than 
0.01 percent of soluble aluminum, (3) 0.040 percent or less, in the 
aggregate, of phosphorus and sulfur, (4) 0.008 percent or less of 
nitrogen, and (5) either not more than 0.15 percent, in the aggregate, 
of copper, nickel and chromium (if chromium is not specified), or not 
more than 0.10 percent in the aggregate of copper and nickel and a 
chromium content of 0.24 to 0.30 percent (if chromium is specified).
    For purposes of the grade 1080 tire cord quality wire rod and the 
grade 1080 tire bead quality wire rod, an inclusion will be considered 
to be deformable if its ratio of length

[[Page 67424]]

(measured along the axis - that is, the direction of rolling - of the 
rod) over thickness (measured on the same inclusion in a direction 
perpendicular to the axis of the rod) is equal to or greater than 
three. The size of an inclusion for purposes of the 20 microns and 35 
microns limitations is the measurement of the largest dimension 
observed on a longitudinal section measured in a direction 
perpendicular to the axis of the rod. This measurement methodology 
applies only to inclusions on certain grade 1080 tire cord quality wire 
rod and certain grade 1080 tire bead quality wire rod that are entered, 
or withdrawn from warehouse, for consumption on or after July 24, 2003.
    The designation of the products as ``tire cord quality'' or ``tire 
bead quality'' indicates the acceptability of the product for use in 
the production of tire cord, tire bead, or wire for use in other rubber 
reinforcement applications such as hose wire. These quality 
designations are presumed to indicate that these products are being 
used in tire cord, tire bead, and other rubber reinforcement 
applications, and such merchandise intended for the tire cord, tire 
bead, or other rubber reinforcement applications is not included in the 
scope. However, should petitioners or other interested parties provide 
a reasonable basis to believe or suspect that there exists a pattern of 
importation of such products for other than those applications, end-use 
certification for the importation of such products may be required. 
Under such circumstances, only the importers of record would normally 
be required to certify the end use of the imported merchandise.
    All products meeting the physical description of subject 
merchandise that are not specifically excluded are included in this 
scope.
    The products under review are currently classifiable under 
subheadings 7213.91.3010, 7213.91.3090, 7213.91.4510, 7213.91.4590, 
7213.91.6010, 7213.91.6090, 7213.99.0031, 7213.99.0038, 7213.99.0090, 
7227.20.0010, 7227.20.0020, 7227.20.0090, 7227.20.0095, 7227.90.6051, 
7227.90.6053, 7227.90.6058, and 7227.90.6059 of the HTSUS. Although the 
HTSUS subheadings are provided for convenience and customs purposes, 
the written description of the scope of this proceeding is 
dispositive.\5\
---------------------------------------------------------------------------

    \5\ Effective January 1, 2004, CBP reclassified certain HTSUS 
numbers related to the subject merchandise. See http://hotdocs.usitc.gov/tariff_chapters_current/toc.html.
---------------------------------------------------------------------------

Product Comparisons

    In accordance with section 771(16) of the Act, all products 
produced by the respondents covered by the description in the ``Scope 
of Review'' section, above, and sold in Mexico during the POR are 
considered to be foreign like products for purposes of determining 
appropriate product comparisons to U.S. sales. We have relied on eight 
criteria to match U.S. sales of subject merchandise to comparison-
market sales of the foreign like product or constructed value (``CV''): 
grade range, carbon content range, surface quality, deoxidation, 
maximum total residual content, heat treatment, diameter range, and 
coating. These characteristics have been weighted by the Department 
where appropriate. Where there were no sales of identical merchandise 
in the home market made in the ordinary course of trade to compare to 
U.S. sales, we compared U.S. sales to the next most similar foreign 
like product on the basis of the characteristics listed above. Where 
there were no sales of the foreign like product in the home market 
suitable for matching to the subject merchandise, we used constructed 
value as the basis for normal value.

Comparisons to Normal Value

    To determine whether sales of wire rod from Mexico were made in the 
United States at less than NV, we compared the EP to the NV, as 
described in the ``Export Price'' and ``Normal Value'' sections of this 
notice. In accordance with section 777A(d)(2) of the Act, we calculated 
monthly weighted-average prices for NV and compared these to individual 
U.S. transactions. See the company-specific calculation memoranda, 
available in the CRU.

Export Price

    For the price to the United States, we used EP in accordance with 
sections 772(a) of the Act. We calculated EP when the merchandise was 
sold by the producer or exporter outside of the United States directly 
to the first unaffiliated purchaser in the United States prior to 
importation and when Constructed Export Price was not otherwise 
warranted based on the facts on the record. We based EP on the packed 
cost-insurance-freight (``CIF''), ex-factory, free-on-board (``FOB''), 
or delivered prices to the first unaffiliated customer in, or for 
exportation to, the United States.
    In accordance with section 772(c)(2) of the Act, we made 
deductions, where appropriate, for movement expenses including inland 
freight from plant or warehouse to port of exportation, foreign 
brokerage, handling and loading charges, U.S. brokerage, and U.S. 
inland freight expenses (freight from port to the customer).
    In accordance with 19 CFR 351.401(c) and in keeping with our 
practice, we added interest, freight, and other revenue (i.e., Mexican 
and U.S. brokerage and handling, and duty charged to customer) where 
applicable. See, e.g., Light-Walled Rectangular Pipe and Tube from 
Mexico: Notice of Preliminary Determination of Sales at Less Than Fair 
Value and Postponement of Final Determination, 69 FR 19400, 19406 
(April 13, 2004); unchanged in Light-Walled Rectangular Pipe and Tube 
From Mexico: Notice of Final Determination of Sales at Less Than Fair 
Value, 69 FR 53677 (September 2, 2004).

Normal Value

A. Selection of Comparison Markets
    To determine whether there was a sufficient volume of sales in the 
home market to serve as a viable basis for calculating NV, we compared 
each respondent's volume of home market sales of the foreign like 
product to the volume of its U.S. sales of the subject merchandise. 
Pursuant to sections 773(a)(1)(B) and 773(a)(1)(C) of the Act, because 
each respondent had an aggregate volume of home market sales of the 
foreign like product that was greater than five percent of its 
aggregate volume of U.S. sales of the subject merchandise, we 
determined that the home market was viable for all producers.
B. Arm's-Length Test
    SICARTSA and Hylsa Puebla reported sales of the foreign like 
product to affiliated end-users and affiliated resellers. The 
Department calculates the NV based on a sale to an affiliated party 
only if it is satisfied that the price to the affiliated party is 
comparable to the price at which sales are made to parties not 
affiliated with the producer or exporter, i.e., sales at arm's-length. 
See 19 CFR 351.403(c). To test whether these sales were made at arm's-
length, we compared the starting prices of sales to affiliated and 
unaffiliated customers net of all movement charges, direct selling 
expenses, discounts and packing. In accordance with the Department's 
current practice, if the prices charged to an affiliated party were, on 
average, between 98 and 102 percent of the prices charged to 
unaffiliated parties for merchandise identical or most similar to that 
sold to the affiliated party, we consider the sales to be at arm's-
length

[[Page 67425]]

prices. See 19 CFR 351.403(c); see also, Antidumping Proceedings: 
Affiliated Party Sales in the Ordinary Course of Trade, 67 FR 69186, 
69187 (November 15, 2002). Conversely, where sales to the affiliated 
party did not pass the arm's-length test, all sales to that affiliated 
party have been excluded from the NV calculation. Id. Both Hysla and 
SICARTSA had sales that did not pass the arm's-length test and were 
excluded from the NV calculation.
C. Cost of Production (``COP'') Analysis
1. Calculation of COP
    Before making any comparisons to NV, we conducted a COP analysis of 
SICARTSA and Hylsa Puebla, pursuant to section 773(b) of the Act, to 
determine whether the respondents' comparison market sales were made 
below the COP. We calculated the COP based on the sum of the cost of 
materials and fabrication for the foreign like product, plus amounts 
for selling, general, and administrative expenses (``SG&A'') and 
packing, in accordance with section 773(b)(3) of the Act. We relied on 
the respondents' information as submitted.
    In the prior review we found that for iron ore and lime, major 
inputs in wire rod production, the affiliates' average COP exceeded the 
transfer price SICARTSA paid to its affiliated suppliers. See 
Preliminary Results of Antidumping Duty Administrative Review of the 
Antidumping Duty: Carbon and Alloy Steel Wire Rod from Mexico, 69 FR 
64722, 64725 (November 8, 2004); unchanged in Notice of Final Results 
of Antidumping Duty Administrative Review: Carbon and Certain Alloy 
Steel Wire Rod From Mexico, 70 FR 25809 (May 16, 2005). In the current 
review, we preliminarily find that with respect to SICARTSA's 
affiliates, the average COP for iron ore exceeded the transfer price 
SICARTSA paid for those inputs. Therefore, pursuant to section 
773(f)(3) of the Act, we applied the major input rule and adjusted 
SICARTSA's reported cost of manufacturing to account for purchases of 
iron ore from affiliated parties at non-arm's-length prices. We were 
unable to compare the transfer price for iron ore to a market price as 
there were no unaffiliated purchases or sales. See SICARTSA's February 
11 2005 Questionnaire Response at Exhibit D-5 and page D-9. We 
therefore, adjusted SICARTSA's reported cost of manufacturing (``COM'') 
to reflect the higher COP. Regarding SICARTSA's purchases of lime from 
affiliated parties, we preliminarily find that its purchases were not 
large enough to warrant examining whether the purchases were at arm's 
length. See Exhibit D-5 of SICARTSA's February 11, 2005 response. This 
approach is consistent with the Department's practice. See, e.g., 
Comment 26 of the Issues and Decision Memorandum that accompanied the 
Notice of Final Determination of Sales at Less Than Fair Value; Certain 
Cold-Rolled Carbon Steel Flat Products From France, 67 FR 62114 
(October 3, 2002). Therefore, we have accepted SICARTSA's cost of lime 
inputs from its affiliated parties, as reported.
2. Test of Comparison Market Prices
    As required under section 773(b)(2) of the Act, we compared the 
weighted-average COP to the per-unit price of the comparison market 
sales of the foreign like product, to determine whether these sales had 
been made at prices below the COP within an extended period of time in 
substantial quantities, and whether such prices were sufficient to 
permit the recovery of all costs within a reasonable period of time. In 
accordance with the statute and the Department's practice, we 
determined the net comparison market prices for the below-cost test by 
subtracting from the gross unit price any applicable movement charges, 
discounts, rebates, direct and indirect selling expenses (also 
subtracted from the COP), and packing expenses. See section 773(b) of 
the Act; see also Certain Steel Concrete Reinforcing Bars From Turkey: 
Preliminary Results and Partial Rescission of Antidumping Duty 
Administrative Review and Notice of Intent Not To Revoke in Part, 69 FR 
25063, 25066 (May 5, 2004); unchanged in Certain Steel Concrete 
Reinforcing Bars From Turkey: Final Results, Rescission of Antidumping 
Duty Administrative Review in Part, and Determination Not To Revoke in 
Part, 69 FR 64731 (November 8, 2004).
3. Results of the COP Test
    Pursuant to section 773(b)(2)(C)(i) of the Act, where less than 20 
percent of sales of a given product were at prices less than the COP, 
we did not disregard any below-cost sales of that product because we 
determined that the below-cost sales were not made in ``substantial 
quantities.'' Where 20 percent or more of a respondent's sales of a 
given product during the POR were at prices less than the COP, we 
determined such sales to have been made in ``substantial quantities.'' 
See section 773(b)(2)(C) of the Act. The sales were made within an 
extended period of time in accordance with section 773(b)(2)(B) of the 
Act, because they were made over the course of the POR. In such cases, 
because we compared prices to POR-average costs, we also determined 
that such sales were not made at prices which would permit recovery of 
all costs within a reasonable period of time, in accordance with 
section 773(b)(2)(D) of the Act. Therefore, for SICARTSA and Hylsa 
Puebla, for purposes of this administrative review, we disregarded 
below-cost sales of a given product and used the remaining sales as the 
basis for determining NV, in accordance with section 773(b)(1) of the 
Act. See the company-specific calculation memoranda on file in the CRU 
for our calculation methodology and results.
D. Calculation of Normal Value Based on Comparison Market Prices
    We calculated NV based on ex-works, FOB or delivered prices to 
comparison market customers. We recalculated the starting price taking 
into account, where necessary, billing adjustments and early payment 
discounts. Pursuant to section 773(a)(6)(B)(ii) of the Act, we made 
deductions from the starting price, when appropriate, for rebates, 
handling, loading, inland freight, warehousing, inland insurance. In 
accordance with 19 CFR 351.401(c), we added interest revenue and other 
revenue, where applicable. In accordance with sections 773(a)(6)(A) and 
(B) of the Act, we added U.S. packing costs and deducted comparison 
market packing, respectively. In addition, we made circumstance of sale 
(``COS'') adjustments for direct expenses, including imputed credit 
expenses, and warranty expenses in accordance with section 
773(a)(6)(C)(iii) of the Act.
    We also made adjustments, in accordance with 19 CFR 351.410(e), for 
indirect selling expenses incurred on comparison market or U.S. sales 
where commissions were granted on sales in one market but not in the 
other, the ``commission offset.'' Specifically, where commissions are 
incurred in one market, but not in the other, we will limit the amount 
of such allowance to the amount of either the selling expenses incurred 
in the one market or the commissions allowed in the other market, 
whichever is less.
    When comparing U.S. sales with comparison market sales of similar, 
but not identical, merchandise, we also made adjustments for physical 
differences in the merchandise in accordance with section 
773(a)(6)(C)(ii) of the Act and 19 CFR 351.411. We based this 
adjustment on the difference in the variable cost of manufacturing for 
the foreign like product and subject merchandise, using POR-average 
costs.

[[Page 67426]]

    Sales of wire rod purchased by the respondents from unaffiliated 
producers and resold in the comparison market were treated in the same 
manner described above in the ``Export Price'' section of this notice.
E. Calculation of Normal Value Based on Constructed Value
    When we could not determine the NV based on comparison market sales 
because there were no contemporaneous sales of a comparable product, we 
compared the EP to CV. In accordance with section 773(e) of the Act, we 
calculated CV based on the sum of the COM of the product sold in the 
United States, plus amounts for SG&A expenses, profit, and U.S. packing 
costs.
    For price-to-CV comparisons, we made adjustments to CV for COS 
differences, in accordance with section 773(a)(8) of the Act and 19 CFR 
351.410. We made COS adjustments by deducting direct selling expenses 
incurred on comparison market sales and adding U.S. direct selling 
expenses.
F. Level of Trade
    In accordance with section 773(a)(1)(B) of the Act, we determined 
NV based on sales in the comparison market at the same level of trade 
as the EP sales, to the extent practicable. When there were no sales at 
the same LOT, we compared U.S. sales to comparison market sales at a 
different LOT. When NV is based on CV, the NV LOT is that of the sales 
from which we derive SG&A expenses and profit.
    Pursuant to 19 CFR 351.412, to determine whether comparison market 
sales were at a different LOT, we examined stages in the marketing 
process and selling functions along the chain of distribution between 
the producer and the unaffiliated (or arm's-length) customers. If the 
comparison-market sales were at a different LOT and the differences 
affect price comparability, as manifested in a pattern of consistent 
price differences between the sales on which NV is based and 
comparison-market sales at the LOT of the export transaction, we will 
make an LOT adjustment under section 773(a)(7)(A) of the Act.
    With respect to Sicartsa, for these preliminary results, we did not 
make a LOT adjustment because we did not find a LOT in the home market 
identical to the U.S. LOT, and thus we lacked the basis for quantifying 
the adjustment. This approach is consistent with the method employed in 
the prior administrative review. See page 5 of the November 1, 2004 
memorandum to the file, ``Preliminary Calculation Memorandum for 
Siderurgica Lazaro Cardenas Las Truchas (SICARTSA)'' from Tipten 
Troidl, Case Analyst, Office of AD/CVD Operations III. As discussed 
above, we decided not to incorporate the information regarding LOT from 
Sicartsa's October 25, 2005, submission into these preliminary results. 
However, our finding on this issue may change in the final results.
    In its questionnaire response, Hylsa Puebla did not claim a LOT 
adjustment. See Hylsa Puebla Sections B and C questionnaire response 
dated February 4, 2005 at page 28. Moreover, based on our analysis of 
the facts of this administrative review, we preliminarily determine 
that there is no substantial difference in the selling functions 
between the sales on which NV is based and the export transactions. All 
of Hylsa Puebla's U.S. sales are reported as EP sales. Thus, we have 
matched EP sales to sales in the home market without regard to level of 
trade and made no level of trade adjustment.
    For a detailed description of our LOT methodology and a summary of 
company-specific LOT findings for these preliminary results, see the 
calculation memoranda, all on file in the CRU.

Currency Conversion

    For purposes of these preliminary results, we made currency 
conversions in accordance with section 773A(a) of the Act, based on the 
official exchange rates published by the Federal Reserve Bank.

Preliminary Results of Review

    As a result of our review, we preliminarily determine that the 
following percentage weighted-average margins exist for the period 
October 1, 2003, through September 30, 2004:

------------------------------------------------------------------------
                Manufacturer/exporter                  Margin (percent)
------------------------------------------------------------------------
Hylsa Puebla........................................                4.97
SICARTSA............................................                4.28
------------------------------------------------------------------------

    The Department will disclose calculations performed within five 
days of the date of publication of this notice to the parties of this 
proceeding in accordance with 19 CFR 351.224(b). An interested party 
may request a hearing within 30 days of publication of these 
preliminary results. See 19 CFR 351.310(c). Any hearing, if requested, 
will be held 37 days after the date of publication, or the first 
working day thereafter, unless the Department alters the date pursuant 
to 19 CFR 351.310(d). Interested parties may submit case briefs no 
later than 30 days after the date of publication of these preliminary 
results of review. Rebuttal briefs limited to issues raised in the case 
briefs, may be filed no later than 35 days after the date of 
publication. Parties who submit arguments are requested to submit with 
the argument (1) a statement of the issue, and (2) a brief summary of 
the argument. Further, parties submitting written comments are 
requested to provide the Department with an additional copy of the 
public version of any such comments on diskette. The Department will 
issue the final results of this administrative review, which will 
include the results of its analysis of issues raised in any such 
comments, or at a hearing, within 120 days of publication of these 
preliminary results.

Assessment Rate

    Pursuant to 19 CFR 351.212(b), the Department calculated an 
assessment rate for each importer of the subject merchandise. Upon 
issuance of the final results of this administrative review, if any 
importer-specific assessment rates calculated in the final results are 
above de minimis (i.e., at or above 0.5 percent), the Department will 
issue appraisement instructions directly to CBP to assess antidumping 
duties on appropriate entries by applying the assessment rate to the 
entered value of the merchandise. For assessment purposes, we 
calculated importer-specific assessment rates for the subject 
merchandise by aggregating the dumping margins for all U.S. sales to 
each importer and dividing the amount by the total entered value of the 
sales to that importer. Where appropriate, to calculate the entered 
value, we subtracted international movement expenses (e.g., 
international freight) from the gross sales value.

Cash Deposit Requirements

    To calculate the cash deposit rate for each producer and/or 
exporter included in this administrative review, we divided the total 
dumping margins for each company by the total net value for that 
company's sales during the review period.
    The following deposit rates will be effective upon publication of 
the final results of this administrative review for all shipments of 
wire rod from Mexico entered, or withdrawn from warehouse, for 
consumption on or after the publication date, as provided by section 
751(a)(2)(C) of the Act: (1) The cash deposit rates for the companies 
listed above will be the rates established in the final results of this 
review, except if the rate is less than 0.5 percent and, therefore, de 
minimis, the cash deposit will be zero; (2) for previously reviewed or 
investigated companies not listed above, the cash deposit rate will 
continue to be the company-specific

[[Page 67427]]

rate published for the most recent final results in which that 
manufacturer or exporter participated; (3) if the exporter is not a 
firm covered in this review, a prior review, or the original LTFV 
investigation, but the manufacturer is, the cash deposit rate will be 
the rate established for the most recent final results for the 
manufacturer of the merchandise; and (4) if neither the exporter nor 
the manufacturer is a firm covered in this or any previous review 
conducted by the Department, the cash deposit rate will be 20.11 
percent, the ``All Others'' rate established in the LTFV investigation. 
See Notice of Final Determination of Sales at Less than Fair Value: 
Carbon and Certain Alloy Steel Wire Rod From Mexico, 67 FR 55800 
(August 30, 2002).
    These cash deposit requirements, when imposed, shall remain in 
effect until publication of the final results of the next 
administrative review.

Notification to Importers

    This notice serves as a preliminary reminder to importers of their 
responsibility under 19 CFR 351.402(f) to file a certificate regarding 
the reimbursement of antidumping duties prior to liquidation of the 
relevant entries during this review period. Failure to comply with this 
requirement could result in the Secretary's presumption that 
reimbursement of antidumping duties occurred and the subsequent 
assessment of double antidumping duties.
    This administrative review is issued and published in accordance 
with sections 751(a)(1) and 777(i)(1) of the Act.

    Dated: October 31, 2005.
Joseph A. Spetrini,
Acting Assistant Secretary for Import Administration.
[FR Doc. 05-22147 Filed 11-4-05; 8:45 am]
BILLING CODE 3510-DS-S