[Federal Register Volume 70, Number 153 (Wednesday, August 10, 2005)]
[Notices]
[Pages 46543-46544]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 05-15773]


=======================================================================
-----------------------------------------------------------------------

INTERNATIONAL TRADE COMMISSION

[Investigation No. TA-421-06]


Circular Welded Non-Alloy Steel Pipe From China

AGENCY: United States International Trade Commission.

ACTION: Institution and scheduling of an investigation under section 
421(b) of the Trade Act of 1974 (19 U.S.C. 2451(b)) (the Act).

-----------------------------------------------------------------------

SUMMARY: Following receipt of a petition filed on August 2, 2005, on 
behalf of Allied Tube and Conduit Corp., Harvey, IL; IPSCO Tubulars, 
Inc., Camanche, IA; Maruichi American Corp., Santa Fe Springs, CA; 
Maverick Tube Corp., Chesterfield, MO; Sharon Tube Co., Sharon, PA; 
Western Tube Conduit Corp., Long Beach, CA; Wheatland Tube Co., 
Wheatland, PA; and the United Steelworkers of America, AFL-CIO, 
Pittsburgh, PA; the Commission instituted investigation No. TA-421-06, 
Circular Welded Non-Alloy Steel Pipe From China, under section 421(b) 
of the Act to determine whether circular welded non-alloy steel pipe 
\1\ from China is being imported into the United States in such 
increased quantities or under such conditions as to cause or threaten 
to cause market disruption to the domestic producers of like or 
directly competitive products.
---------------------------------------------------------------------------

    \1\ For purposes of this investigation, the subject product 
includes certain welded carbon quality steel pipes and tubes, of 
circular cross-section, with an outside diameter of 0.372 inches 
(9.45 mm) or more, but not more than 16 inches (406.4 mm), 
regardless of wall thickness, surface finish (black, galvanized, or 
painted), end finish (plain end, beveled end, grooved, threaded, or 
threaded and coupled), or industry specification (ASTM, proprietary, 
or other), generally known as standard pipe and structural pipe 
(they may also be referred to as structural or mechanical tubing). 
The term carbon quality steel may include certain low alloy steel 
imported as other alloy steel pipes and tubes.
    All pipe meeting the physical description set forth above that 
is used in, or intended for use in, standard and structural pipe 
applications is covered by the scope of this investigation. Standard 
pipe applications include the low-pressure conveyance of water, 
steam, natural gas, air and other liquids and gases in plumbing and 
heating systems, air conditioning units, automatic sprinkler 
systems, and other related uses. Standard pipe may also be used for 
light load-bearing and mechanical applications, such as for fence 
tubing, and as an intermediate product for protection of electrical 
wiring, such as conduit shells. Structural pipe is used in 
construction applications.
    The imported products are currently provided for in the 
Harmonized Tariff Schedule of the United States (HTS) subheadings 
7306.30.10 and 7306.30.50. Specifically, the various HTS statistical 
reporting numbers under which the subject standard pipe has been 
provided for since January 1, 1992, are as follows: 7306.30.1000, 
7306.30.5025, 7306.30.5032, 7306.30.5040, 7306.30.5055, 
7306.30.5085, and 7306.30.5090. Although the HTS category is 
provided for convenience and Customs purposes, the written 
description of the merchandise under investigation is dispositive.
    Pipe multiple-stenciled to the ASTM A-53 specification and to 
any other specification, such as the API-fL or 5L X-42 
specifications, or single-certified pipe that enters under HTS 
subheading 7306.10.10, is covered by this investigation when used 
in, or intended for use in, one of the standard pipe applications 
listed above, regardless of the HTS category in which it is entered. 
Pipe shells that enter the United States under HTS subheading 
7306.30.50, including HTS statistical reporting number 7306.30.5028, 
are also covered by this investigation. The investigation also 
covers pipe used for the production of scaffolding (but does not 
include finished scaffolding).
    Products not included in this investigation are mechanical 
tubing (whether or not cold-drawn) provided for in HTS subheading 
7306.30.50, tube and pipe hollows for redrawing provided for in HTS 
7306.30.5035, or finished electrical conduit provided for in HTS 
7306.30.5028. API line pipe used in oil or gas applications 
requiring API certifications is also not included in this 
investigation. Similarly, pipe produced to the API specifications 
for oil country tubular goods use are not included in this 
investigation.
---------------------------------------------------------------------------

    For further information concerning the conduct of this 
investigation, hearing procedures, and rules of general application, 
consult the Commission's Rules of Practice and Procedure, part 201, 
subparts A through E (19 CFR part 201), and part 206, subparts A and E 
(19 CFR part 206).

DATES: Effective August 2, 2005.

FOR FURTHER INFORMATION CONTACT: Fred Ruggles (202-205-3187 or via E-
mail, [email protected]), Office of Investigations, U.S. 
International Trade Commission, 500 E Street SW., Washington, DC 20436. 
Hearing-impaired persons can obtain information on this matter by 
contacting the Commission's TDD terminal on 202-205-1810. Persons with 
mobility impairments who will need special assistance in gaining access 
to the Commission should contact the Office of the Secretary at 202-
205-2000. General information concerning the Commission may also be 
obtained by accessing its Internet server (http://www.usitc.gov). The 
public record for this investigation may be viewed on the Commission's 
electronic docket (EDIS) at http://edis.usitc.gov.

SUPPLEMENTARY INFORMATION:
    Participation in the investigation and service list.--Persons 
wishing to participate in the investigation as parties must file an 
entry of appearance with the Secretary to the Commission, as provided 
in section 201.11 of the Commission's rules, not later than seven days 
after publication of this notice in the Federal Register. The Secretary 
will prepare a service list containing the names and addresses of all 
persons, or their representatives, who are parties to this 
investigation upon the expiration of

[[Page 46544]]

the period for filing entries of appearance.
    Limited disclosure of confidential business information (``CBI'') 
under an administrative protective order (``APO'') and CBI service 
list.--Pursuant to section 206.47 of the Commission's rules, the 
Secretary will make CBI gathered in this investigation available to 
authorized applicants under the APO issued in the investigation, 
provided that the application is made not later than seven days after 
the publication of this notice in the Federal Register. A separate 
service list will be maintained by the Secretary for those parties 
authorized to receive CBI under the APO.
    Hearing.--The Commission has scheduled a hearing in connection with 
this investigation beginning at 9:30 a.m. on September 16, 2005, at the 
U.S. International Trade Commission Building. Subjects related to both 
market disruption or threat thereof and remedy may be addressed at the 
hearing. Requests to appear at the hearing should be filed in writing 
with the Secretary to the Commission on or before September 7, 2005. 
All persons desiring to appear at the hearing and make oral 
presentations should attend a prehearing conference to be held at 9:30 
a.m. on September 9 at the U.S. International Trade Commission 
Building. Oral testimony and written materials to be submitted at the 
hearing are governed by sections 201.6(b)(2) and 201.13(f) of the 
Commission's rules.
    Written submissions.--Each party is encouraged to submit a 
prehearing brief to the Commission. The deadline for filing prehearing 
briefs is September 9, 2005. Parties may also file posthearing briefs. 
The deadline for filing posthearing briefs is September 21, 2005. In 
addition, any person who has not entered an appearance as a party to 
the investigation may submit a written statement of information 
pertinent to the consideration of market disruption or threat thereof 
and/or remedy on or before September 29, 2005. Parties may submit final 
comments on market disruption on September 29, 2005 and on remedy on 
October 4, 2005. Final comments shall contain no more than ten (10) 
double-spaced and single-sided pages of textual material. All written 
submissions must conform with the provisions of section 201.8 of the 
Commission's rules. The Commission's rules do not authorize filing of 
submissions with the Secretary by facsimile or electronic means, except 
to the extent permitted by section 201.8 of the Commission's rules, as 
amended, 67 FR 68036 (November 8, 2002). Even where electronic filing 
of a document is permitted, certain documents must also be filed in 
paper form, as specified in II(C) of the Commission's Handbook on 
Electronic Filing Procedures, 67 FR 68168, 68173 (November 8, 2002).
    Additional written submissions to the Commission, including 
requests pursuant to section 201.12 of the Commission's rules, will not 
be accepted unless good cause is shown for accepting such submissions, 
or unless the submission is pursuant to a specific request by a 
Commissioner or Commission staff.
    Any submissions that contain CBI must also conform with the 
requirements of section 201.6 of the Commission's rules. CBI that is 
furnished in written submissions (1) may be subject to, and may be 
released under an administrative protective order issued by the 
Commission pursuant to section 206.47 of the Commission's Rules of 
Practice and Procedure; (2) may be included in a confidential version 
of the report that the Commission transmits to the President and the 
U.S. Trade Representative, should the Commission transmit a 
confidential version; and (3) may also be used in any other import 
injury investigations conducted by the Commission on the same, or 
similar, subject matter.
    In accordance with section 201.16(c) of the Commission's rules, 
each document filed by a party to the investigation must be served on 
all other parties to the investigation (as identified by the service 
list), and a certificate of service must be timely filed. The Secretary 
will not accept a document for filing without a certificate of service.
    Remedy.--Parties are reminded that no separate hearing on the issue 
of remedy will be held. Those parties wishing to present arguments on 
the issue of remedy may do so orally at the hearing or in their 
prehearing briefs, posthearing briefs, or final comments on remedy.

    Authority: This investigation is being conducted under the 
authority of section 421 of the Trade Act of 1974; this notice is 
published pursuant to section 206.3 of the Commission's rules.

    Issued: August 4, 2005.

    By order of the Commission.
Marilyn R. Abbott,
Secretary to the Commission.
[FR Doc. 05-15773 Filed 8-9-05; 8:45 am]
BILLING CODE 7020-02-P