[Federal Register Volume 70, Number 153 (Wednesday, August 10, 2005)]
[Notices]
[Pages 46570-46571]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 05-15757]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Pipeline and Hazardous Materials Safety Administration

[Docket No. PHMSA-05-21314; Notice 1]


Pipeline Safety: Petition for Waiver; BOC Gases

AGENCY: Office of Pipeline Safety (OPS), Pipeline and Hazardous 
Materials Safety Administration (PHMSA), U.S. Department of 
Transportation (DOT).

ACTION: Notice; Petition for Waiver; Correction.

-----------------------------------------------------------------------

SUMMARY: PHMSA is correcting a petition for waiver published in the

[[Page 46571]]

Federal Register on July 14, 2005 (70 FR 40780). That petition, from 
BOC Gases (BOC), requested a waiver from the pipeline safety standards 
at 49 CFR 195.306(c)(5) to allow the use of inert gas or carbon dioxide 
as the test medium for pressure testing an existing carbon dioxide 
pipeline. This notice corrects the supplementary information of that 
publication, which referred to a gas pipeline safety regulation when it 
should have referred to a hazardous liquid pipeline safety regulation.

FOR FURTHER INFORMATION CONTACT: James Reynolds by phone at 202-366-
2786, by fax at 202-366-4566, by mail at DOT, PHMSA Office of Pipeline 
Safety, 400 7th Street, SW., Washington, DC 20590, or by e-mail at 
[email protected].

Correction

    In the Federal Register of July 14, 2005, in FR Doc. 05-13864, on 
page 40781, in the first column, correct the first paragraph of the 
SUPPLEMENTARY INFORMATION caption to read:

SUPPLEMENTARY INFORMATION: The hazardous liquid pipeline safety 
regulation at 49 CFR 195.306(c)(5) allows an operator of a carbon 
dioxide pipeline to use inert gas or carbon dioxide as the test medium 
if the pipe involved is new pipe having a longitudinal joint factor of 
1.00.

    Issued in Washington, DC on August 1, 2005.
Joy Kadnar,
Director of Engineering and Emergency Support.
[FR Doc. 05-15757 Filed 8-9-05; 8:45 am]
BILLING CODE 4910-60-P