[Federal Register Volume 70, Number 18 (Friday, January 28, 2005)]
[Notices]
[Pages 4122-4126]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 05-1637]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[OPPT-2005-0002; FRL-7697-2]


Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires 
any person who intends to manufacture (defined by statute to include 
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to 
notify EPA and comply with the statutory provisions pertaining to the 
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of 
TSCA, EPA is required to publish a notice of receipt of a 
premanufacture notice (PMN) or an application for a test marketing 
exemption (TME), and to publish periodic status reports on the 
chemicals under review and the receipt of notices of commencement to 
manufacture those chemicals. This status report, which covers the 
period from December 1, 2004 to December 14, 2004, consists of the PMNs 
pending or expired, and the notices of commencement to manufacture a 
new chemical that the Agency has received under TSCA section 5 during 
this time period.

DATES: Comments identified by the docket ID number OPPT-2005-0002 and 
the specific PMN number or TME number, must be received on or before 
February 28, 2005.

ADDRESSES: Comments may be submitted electronically, by mail, or 
through hand delivery/courier. Follow the detailed instructions as 
provided in Unit I. of the SUPPLEMENTARY INFORMATION.

FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator, 
Environmental Assistance Division, Office of Pollution Prevention and 
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania 
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; 
e-mail address: [email protected].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

    This action is directed to the public in general. As such, the 
Agency has not attempted to describe the specific entities that this 
action may apply to. Although others may be affected, this action 
applies directly to the submitter of the premanufacture notices 
addressed in the action. If you have any questions regarding the 
applicability of this action to a particular entity, consult the person 
listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Copies of this Document and Other Related Information?

    1. Docket. EPA has established an official public docket for this 
action under docket identification (ID) number OPPT-2005-0002. The 
official public docket consists of the documents specifically 
referenced in this action, any public comments received, and other 
information related to this action. Although a part of the official 
docket, the public docket does not include Confidential Business 
Information (CBI) or other information whose disclosure is restricted 
by statute. The official public docket is the collection of materials 
that is available for public viewing at the EPA Docket Center, Rm. 
B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, 
DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday 
through Friday, excluding legal holidays. The EPA Docket Center Reading 
Room telephone number is (202) 566-1744 and the telephone number for 
the OPPT Docket, which is located in EPA Docket Center, is (202) 566-
0280.
    2. Electronic access. You may access this Federal Register document 
electronically through the EPA Internet under the ``Federal Register'' 
listings at http://www.epa.gov/fedrgstr/.
    An electronic version of the public docket is available through 
EPA's electronic public docket and comment system, EPA Dockets. You may 
use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public 
comments, access the index listing of the contents of the official 
public docket, and to access those documents in the public docket that 
are available electronically. Although not all docket materials may be 
available electronically, you may still access any of the publicly 
available docket materials through the docket facility identified in 
Unit I.B.1. Once in the system, select ``search,'' then key in the 
appropriate docket ID number.
    Certain types of information will not be placed in the EPA Dockets. 
Information claimed as CBI and other information whose disclosure is 
restricted by statute, which is not included in the official public 
docket, will not be available for public viewing in EPA's electronic 
public docket. EPA's policy is that copyrighted material will not be 
placed in EPA's electronic public docket but will be available only in 
printed, paper form in the official public docket. To the extent 
feasible, publicly available docket materials will be made available in 
EPA's electronic public docket. When a document is selected from the 
index list in EPA Dockets, the system will identify whether the 
document is available for viewing in EPA's electronic public docket. 
Although not all docket materials may be available electronically, you 
may still access any of the publicly available docket materials through 
the docket facility identified in Unit I.B.1. EPA intends to work 
towards providing electronic access to all of the publicly available 
docket materials through EPA's electronic public docket.
    For public commenters, it is important to note that EPA's policy is 
that public comments, whether submitted electronically or in paper, 
will be made available for public viewing in EPA's electronic public 
docket as EPA receives them and without change, unless the comment 
contains copyrighted material, CBI, or other information whose 
disclosure is restricted by statute. When EPA identifies a comment 
containing copyrighted material, EPA will provide a reference to that 
material in the version of the comment that is placed in EPA's 
electronic public docket. The entire printed comment, including the 
copyrighted material, will be available in the public docket.
    Public comments submitted on computer disks that are mailed or 
delivered to the docket will be transferred to EPA's electronic public 
docket. Public comments that are mailed or delivered to the docket will 
be scanned and placed in EPA's electronic public docket. Where 
practical, physical

[[Page 4123]]

objects will be photographed, and the photograph will be placed in 
EPA's electronic public docket along with a brief description written 
by the docket staff.

C. How and To Whom Do I Submit Comments?

    You may submit comments electronically, by mail, or through hand 
delivery/courier. To ensure proper receipt by EPA, identify the 
appropriate docket ID number and specific PMN number or TME number in 
the subject line on the first page of your comment. Please ensure that 
your comments are submitted within the specified comment period. 
Comments received after the close of the comment period will be marked 
``late.'' EPA is not required to consider these late comments. If you 
wish to submit CBI or information that is otherwise protected by 
statute, please follow the instructions in Unit I.D. Do not use EPA 
Dockets or e-mail to submit CBI or information protected by statute.
    1. Electronically. If you submit an electronic comment as 
prescribed in this unit, EPA recommends that you include your name, 
mailing address, and an e-mail address or other contact information in 
the body of your comment. Also include this contact information on the 
outside of any disk or CD ROM you submit, and in any cover letter 
accompanying the disk or CD ROM. This ensures that you can be 
identified as the submitter of the comment and allows EPA to contact 
you in case EPA cannot read your comment due to technical difficulties 
or needs further information on the substance of your comment. EPA's 
policy is that EPA will not edit your comment, and any identifying or 
contact information provided in the body of a comment will be included 
as part of the comment that is placed in the official public docket, 
and made available in EPA's electronic public docket. If EPA cannot 
read your comment due to technical difficulties and cannot contact you 
for clarification, EPA may not be able to consider your comment.
    i. EPA Dockets. Your use of EPA's electronic public docket to 
submit comments to EPA electronically is EPA's preferred method for 
receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket/, and follow the online instructions for submitting comments. 
Once in the system, select ``search,'' and then key in docket ID number 
OPPT-2005-0002. The system is an ``anonymous access'' system, which 
means EPA will not know your identity, e-mail address, or other contact 
information unless you provide it in the body of your comment.
    ii. E-mail. Comments may be sent by e-mail to [email protected], 
Attention: Docket ID Number OPPT-2005-0002 and PMN Number or TME 
Number. In contrast to EPA's electronic public docket, EPA's e-mail 
system is not an ``anonymous access'' system. If you send an e-mail 
comment directly to the docket without going through EPA's electronic 
public docket, EPA's e-mail system automatically captures your e-mail 
address. E-mail addresses that are automatically captured by EPA's e-
mail system are included as part of the comment that is placed in the 
official public docket, and made available in EPA's electronic public 
docket.
    iii. Disk or CD ROM. You may submit comments on a disk or CD ROM 
that you mail to the mailing address identified in Unit I.C.2. These 
electronic submissions will be accepted in WordPerfect or ASCII file 
format. Avoid the use of special characters and any form of encryption.
    2. By mail. Send your comments to: Document Control Office (7407M), 
Office of Pollution Prevention and Toxics (OPPT), Environmental 
Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-
0001.
    3. By hand delivery or courier. Deliver your comments to: OPPT 
Document Control Office (DCO) in EPA East Bldg., Rm. 6428, 1201 
Constitution Ave., NW., Washington, DC. Attention: Docket ID Number 
OPPT-2005-0002 and PMN Number or TME Number. The DCO is open from 8 
a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The 
telephone number for the DCO is (202) 564-8930.

D. How Should I Submit CBI to the Agency?

    Do not submit information that you consider to be CBI 
electronically through EPA's electronic public docket or by e-mail. You 
may claim information that you submit to EPA as CBI by marking any part 
or all of that information as CBI (if you submit CBI on disk or CD ROM, 
mark the outside of the disk or CD ROM as CBI and then identify 
electronically within the disk or CD ROM the specific information that 
is CBI). Information so marked will not be disclosed except in 
accordance with procedures set forth in 40 CFR part 2.
    In addition to one complete version of the comment that includes 
any information claimed as CBI, a copy of the comment that does not 
contain the information claimed as CBI must be submitted for inclusion 
in the public docket and EPA's electronic public docket. If you submit 
the copy that does not contain CBI on disk or CD ROM, mark the outside 
of the disk or CD ROM clearly that it does not contain CBI. Information 
not marked as CBI will be included in the public docket and EPA's 
electronic public docket without prior notice. If you have any 
questions about CBI or the procedures for claiming CBI, please consult 
the technical person listed under FOR FURTHER INFORMATION CONTACT.

E. What Should I Consider as I Prepare My Comments for EPA?

    You may find the following suggestions helpful for preparing your 
comments:
    1. Explain your views as clearly as possible.
    2. Describe any assumptions that you used.
    3. Provide copies of any technical information and/or data you used 
that support your views.
    4. If you estimate potential burden or costs, explain how you 
arrived at the estimate that you provide.
    5. Provide specific examples to illustrate your concerns.
    6. Offer alternative ways to improve the notice or collection 
activity.
    7. Make sure to submit your comments by the deadline in this 
document.
    8. To ensure proper receipt by EPA, be sure to identify the docket 
ID number assigned to this action and the specific PMN number you are 
commenting on in the subject line on the first page of your response. 
You may also provide the name, date, and Federal Register citation.

II. Why is EPA Taking this Action?

    Section 5 of TSCA requires any person who intends to manufacture 
(defined by statute to include import) a new chemical (i.e., a chemical 
not on the TSCA Inventory to notify EPA and comply with the statutory 
provisions pertaining to the manufacture of new chemicals. Under 
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a 
notice of receipt of a PMN or an application for a TME and to publish 
periodic status reports on the chemicals under review and the receipt 
of notices of commencement to manufacture those chemicals. This status 
report, which covers the period from December 1, 2005 to December 14, 
2005, consists of the PMNs pending or expired, and the notices of 
commencement to manufacture a new chemical that the Agency has received 
under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs

    This status report identifies the PMNs pending or expired, and the 
notices of

[[Page 4124]]

commencement to manufacture a new chemical that the Agency has received 
under TSCA section 5 during this time period. If you are interested in 
information that is not included in the following tables, you may 
contact EPA as described in Unit II. to access additional non-CBI 
information that may be available.
    In Table I of this unit, EPA provides the following information (to 
the extent that such information is not claimed as CBI) on the PMNs 
received by EPA during this period: the EPA case number assigned to the 
PMN; the date the PMN was received by EPA; the projected end date for 
EPA's review of the PMN; the submitting manufacturer; the potential 
uses identified by the manufacturer in the PMN; and the chemical 
identity.

                                            I. 34 Premanufacture Notices Received From: 12/01/04 to 12/14/04
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                                              Projected Notice End
              Case No.                    Received Date               Date           Manufacturer/Importer           Use                  Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-05-0159                            12/01/04                02/28/05                CBI                    (S) Resin for wood     (G) Copolymer of
                                                                                                             coatings               acrylic and
                                                                                                                                    methacrylic esters
P-05-0160                            12/01/04                02/28/05                CBI                    (G) Metalworking       (G) Polyethylene
                                                                                                             fluid additive         glycol esters of
                                                                                                                                    fatty acids
P-05-0161                            12/01/04                02/28/05                CBI                    (G) Metalworking       (G) Polyethylene
                                                                                                             fluid additive         glycol esters of
                                                                                                                                    fatty acids
P-05-0162                            12/01/04                02/28/05                Ashland Inc.,          (G) Adhesive,          (G) Aliphatic
                                                                                      Environmental Health   coating, ink           urethane diacrylate
                                                                                      and Safety                                    monomer
P-05-0163                            12/01/04                02/28/05                Ashland Inc.,          (G) Adhesive,          (G) Aliphatic
                                                                                      Environmental Health   coating, ink           urethane diacrylate
                                                                                      and Safety                                    monomer
P-05-0164                            12/01/04                02/28/05                Ashland Inc.,          (G) Adhesive,          (G) Aliphatic
                                                                                      Environmental Health   coating, ink           urethane diacrylate
                                                                                      and Safety                                    monomer
P-05-0165                            12/01/04                02/28/05                Ashland Inc.,          (G) Adhesive,          (G) Aliphatic
                                                                                      Environmental Health   coating, ink           urethane diacrylate
                                                                                      and Safety                                    monomer
P-05-0166                            12/01/04                02/28/05                Ashland Inc.,          (G) Adhesive,          (G) Aliphatic
                                                                                      Environmental Health   coating, ink           urethane diacrylate
                                                                                      and Safety                                    monomer
P-05-0167                            12/01/04                02/28/05                Ashland Inc.,          (G) Adhesive,          (G) Aliphatic
                                                                                      Environmental Health   coating, ink           urethane
                                                                                      and Safety                                    polyacrylate monomer
P-05-0168                            12/03/04                03/02/05                CBI                    (G) Open, non-         (G) Polyester
                                                                                                             dispersive use.        amidoamine
P-05-0169                            12/03/04                03/02/05                CBI                    (G) Adhesion promoter  (G) Maleic anhydride
                                                                                                                                    and acrylics
                                                                                                                                    modified polyolefin
P-05-0170                            12/07/04                03/06/05                CBI                    (G) Thickening         (G) Acrylic emulsion
                                                                                                             compound for aqueous   polymer
                                                                                                             systems
P-05-0171                            12/07/04                03/06/05                CBI                    (G) Thickening         (G) Acrylic emulsion
                                                                                                             compound for aqueous   polymer
                                                                                                             systems
P-05-0172                            12/07/04                03/06/05                CBI                    (G) Thickening         (G) Acrylic emulsion
                                                                                                             compound for aqueous   polymer
                                                                                                             systems
P-05-0173                            12/07/04                03/06/05                CBI                    (G) Thickening         (G) Acrylic emulsion
                                                                                                             compound for aqueous   polymer
                                                                                                             systems
P-05-0174                            12/07/04                03/06/05                CBI                    (G) Thickening         (G) Acrylic emulsion
                                                                                                             compound for aqueous   polymer
                                                                                                             systems
P-05-0175                            12/07/04                03/06/05                CBI                    (G) Thickening         (G) Acrylic emulsion
                                                                                                             compound for aqueous   polymer
                                                                                                             systems
P-05-0176                            12/06/04                03/05/05                CBI                    (G) Resin for          (G) 2-propenoic acid,
                                                                                                             coatings               2-methyl-,
                                                                                                                                    oxiranylalkyl ester,
                                                                                                                                    polymer with alkyl 2-
                                                                                                                                    propenoate,
                                                                                                                                    ethenylbenzene, and
                                                                                                                                    trialkylcycloaklyl 2-
                                                                                                                                    methyl-2-propenoate,
                                                                                                                                    dialkyl peroxide and
                                                                                                                                    trialkylhexaneperoxo
                                                                                                                                    ate-initiated.
P-05-0177                            12/07/04                03/06/05                CBI                    (S) Base resin for     (G) Alcohol reaction
                                                                                                             utra violet/electron   products with
                                                                                                             beam curable           hexakis(methoxymethy
                                                                                                             formulations; base     l)melamine
                                                                                                             resin for peroxide
                                                                                                             curable formulations
P-05-0178                            12/09/04                03/08/05                Ashland Inc.,          (G) Adhesive,          (G) Multifunctional
                                                                                      Environmental Health   coating, ink           acrylate oligomer
                                                                                      and Safety                                    resin
P-05-0179                            12/09/04                03/08/05                Ashland Inc.,          (G) Adhesive,          (G) Multifunctional
                                                                                      Environmental Health   coating, ink           acrylate oligomer
                                                                                      and Safety                                    resin
P-05-0180                            12/09/04                03/08/05                Ashland Inc.,          (G) Adhesive,          (G) Multifunctional
                                                                                      Environmental Health   coating, ink           acrylate oligomer
                                                                                      and Safety                                    resin

[[Page 4125]]

 
P-05-0181                            12/09/04                03/08/05                Ashland Inc.,          (G) Adhesive,          (G) Multifunctional
                                                                                      Environmental Health   coating, ink           acrylate oligomer
                                                                                      and Safety                                    resin
P-05-0182                            12/09/04                03/08/05                Ashland Inc.,          (G) Adhesive,          (G) Multifunctional
                                                                                      Environmental Health   coating, ink           acrylate oligomer
                                                                                      and Safety                                    resin
P-05-0183                            12/09/04                03/08/05                Ashland Inc.,          (G) Adhesive,          (G) Multifunctional
                                                                                      Environmental Health   coating, ink           acrylate oligomer
                                                                                      and Safety                                    resin
P-05-0184                            12/09/04                03/08/05                CBI                    (S) Organic synthesis  (G) Heteropolycyclic,
                                                                                                             intermediate           9-(2-carboxyphenyl)-
                                                                                                                                    3,6-bis[(2-
                                                                                                                                    methylphenyl)amino]-
                                                                                                                                    , chloride
P-05-0185                            12/09/04                03/08/05                Genencor               (G) Contained use      (S) 2-o-beta-d-
                                                                                      international, Inc.                           glucopyranosyl-d-
                                                                                                                                    glucose
P-05-0186                            12/09/04                03/08/05                CBI                    (S) Curing agent for   (G) There are 5
                                                                                                             epoxy coating          chemical substances
                                                                                                             systems                in this pmn of which
                                                                                                                                    3 are Class I
                                                                                                                                    substances and the
                                                                                                                                    rest 2 are Class II
                                                                                                                                    substances. The
                                                                                                                                    generic name for
                                                                                                                                    each of the 5
                                                                                                                                    chemical susbstances
                                                                                                                                    are given below.
                                                                                                                                    Class I substances:
                                                                                                                                    (1) Reaction product
                                                                                                                                    of polyether amine
                                                                                                                                    and methyl isobutyl
                                                                                                                                    ketone. (2) Reaction
                                                                                                                                    product of
                                                                                                                                    aminopropyl
                                                                                                                                    morpholine and
                                                                                                                                    methyl isobutyl
                                                                                                                                    ketone. (3) Reaction
                                                                                                                                    product of fatty
                                                                                                                                    acids, ethylene
                                                                                                                                    amine and methyl
                                                                                                                                    isobutyl ketone.
                                                                                                                                    Class II substances:
                                                                                                                                    (1) Reaction product
                                                                                                                                    of formaldehyde, 1,3-
                                                                                                                                    benzenedimethanamine
                                                                                                                                    , phenol, and methyl
                                                                                                                                    isobutyl ketone. (2)
                                                                                                                                    Reaction product of
                                                                                                                                    fatty acids,
                                                                                                                                    butoxymethyl
                                                                                                                                    oxirane,
                                                                                                                                    formaldehyde-phenol
                                                                                                                                    polymer glycidyl
                                                                                                                                    ether, aminopropyl
                                                                                                                                    morpholine,
                                                                                                                                    polyether amine,
                                                                                                                                    ethylene amine and
                                                                                                                                    methyl isobutyl
                                                                                                                                    ketone
P-05-0187                            12/09/04                03/08/05                CBI                    (G) Precursor to       (G) Polycarbonate
                                                                                                             polymers used as
                                                                                                             structural
                                                                                                             components
P-05-0188                            12/10/04                03/09/05                CBI                    (S) Paint or coating   (G) Fluoroethylene-
                                                                                                             component              vinyl copolymer
P-05-0189                            12/13/04                03/12/05                CBI                    (G) Inhibition of gas  (G) Methacrylamide
                                                                                                             hydrates               copolymer
P-05-0190                            12/13/04                03/12/05                CBI                    (G) Fiberglass film    (G) Allylether
                                                                                                             former                 functional
                                                                                                                                    unsaturated
                                                                                                                                    polyester
P-05-0191                            12/14/04                03/13/05                Toho Carbon Fibers,    (G) Sizing agent for   (S) 2-propenoic acid,
                                                                                      Inc.                   coating the surface    2-methyl-, 1,3-
                                                                                                             of carbon              phenylenebis[methyle
                                                                                                             multifilament yarn.    nenitrilobis(2-
                                                                                                                                    hydroxy-3,1-
                                                                                                                                    propanediyl)] ester
P-05-0192                            12/14/04                03/13/05                CBI                    (G) Binder resin for   (S) 2-propenoic acid,
                                                                                                             ink                    2-methyl-, polymer
                                                                                                                                    with butyl 2-
                                                                                                                                    propenoate,
                                                                                                                                    ethenylbenzene,
                                                                                                                                    .alpha.-(2-methyl-1-
                                                                                                                                    oxo-2-propenyl)-
                                                                                                                                    .omega.-[(2-methyl-1-
                                                                                                                                    oxo-2-
                                                                                                                                    propenyl)oxy]poly(ox
                                                                                                                                    y-1,2-ethanediyl)
                                                                                                                                    and 2-propenamide
--------------------------------------------------------------------------------------------------------------------------------------------------------

    In Table II of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the 
Notices of Commencement to manufacture received:

                            II. 15 Notices of Commencement From: 12/01/04 to 12/14/04
----------------------------------------------------------------------------------------------------------------
                                                                Commencement Notice
              Case No.                     Received Date             End Date                  Chemical
----------------------------------------------------------------------------------------------------------------
P-00-0907                             12/02/04                11/15/04                (G) Hydroxy functional
                                                                                       acrylic polymer
P-04-0467                             12/09/04                11/02/04                (G) Alkanedioic acid,
                                                                                       polymer with amino-
                                                                                       alkanes
P-04-0470                             12/10/04                11/20/04                (G) Acrylate esters
P-04-0518                             11/30/04                11/24/04                (G) Substituted
                                                                                       benzenesulfonic acid
                                                                                       substituted pyrazol azo
                                                                                       phenyl amino triazin
                                                                                       amino substituted phenyl
                                                                                       compound

[[Page 4126]]

 
P-04-0519                             11/30/04                11/24/04                (G) Substituted
                                                                                       benzenesulfonic acid
                                                                                       substituted pyrazol azo
                                                                                       phenyl amino triazin
                                                                                       amino substituted phenyl
                                                                                       compound
P-04-0611                             12/07/04                11/03/04                (S) (1r,4s)-4-methoxy-
                                                                                       2,2,7,7-
                                                                                       tetramethyltricyclo[6.2.1
                                                                                       .01,6]undec-5-ene
P-04-0626                             12/08/04                11/09/04                (G) Substituted phenol,
                                                                                       polymer with polyalkylene
                                                                                       polyether polyol and
                                                                                       epichlorohydrin
P-04-0659                             12/14/04                11/16/04                (G) N-sulfoalkyl-
                                                                                       aminocarbonylalkenyl,
                                                                                       polymer modified with n,n-
                                                                                       dialkyl-
                                                                                       aminocarbonylalkenyl,
                                                                                       calcium salt
P-04-0683                             12/06/04                11/23/04                (G) Substituted
                                                                                       pyridinecarbonitrile
                                                                                       pigment
P-04-0710                             12/06/04                11/15/04                (G) Alkyl methacrylate
                                                                                       copolymer
P-04-0752                             11/30/04                11/12/04                (G) Organomodified
                                                                                       siloxane and silicone
P-04-0793                             12/06/04                11/20/04                (G) Essential oil
P-04-0815                             12/06/04                11/16/04                (G) Styrene acrylic
                                                                                       copolymer
P-04-0891                             12/01/04                11/02/04                (G) Dynacoll 7250,
                                                                                       dynacoll 7140
P-93-1704                             12/13/04                11/29/04                (G) Polyester polyol
                                                                                       isocyanate polymer
                                                                                       reaction products
----------------------------------------------------------------------------------------------------------------

List of Subjects

    Environmental protection, Chemicals, Premanufacturer notices.

    Dated: January 13, 2005.
Vicki A. Simons,
Acting Director, Information Management Division, Office of Pollution 
Prevention and Toxics.

[FR Doc. 05-1637 Filed 1-27-05; 8:45 am]
BILLING CODE 6560-50-S