[Federal Register Volume 69, Number 217 (Wednesday, November 10, 2004)]
[Notices]
[Pages 65189-65193]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 04-25101]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[OPPT-2004-0124; FRL-7687-6]


Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires 
any person who intends to manufacture (defined by statute to include 
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to 
notify EPA and comply with the statutory provisions pertaining to the 
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of 
TSCA, EPA is required to publish a notice of receipt of a 
premanufacture notice (PMN) or an application for a test marketing 
exemption (TME), and to publish periodic status reports on the 
chemicals under review and the receipt of notices of commencement to 
manufacture those chemicals. This status report, which covers the 
period from October 4, 2004 to October 15, 2004, consists of the PMNs 
pending or expired, and the notices of commencement to manufacture a 
new chemical that the Agency has received under TSCA section 5 during 
this time period.

DATES: Comments identified by the docket ID number OPPT-2004-0124 and 
the specific PMN number or TME number, must be received on or before 
December 10, 2004.

ADDRESSES: Comments may be submitted electronically, by mail, or 
through hand delivery/courier. Follow the detailed instructions as 
provided in Unit I. of the SUPPLEMENTARY INFORMATION.

FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator, 
Environmental Assistance Division, Office of Pollution Prevention and 
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania 
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; 
e-mail address: [email protected].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

    This action is directed to the public in general. As such, the 
Agency has not attempted to describe the specific entities that this 
action may apply to. Although others may be affected, this action 
applies directly to the submitter of the premanufacture notices 
addressed in the action. If you have any questions regarding the 
applicability of this action to a particular entity, consult the person 
listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Copies of this Document and Other Related Information?

    1. Docket. EPA has established an official public docket for this 
action under docket identification (ID) number OPPT-2004-0124. The 
official public docket consists of the documents specifically 
referenced in this action, any public comments received, and other 
information related to this action. Although a part of the official 
docket, the public docket does not include Confidential Business 
Information (CBI)

[[Page 65190]]

or other information whose disclosure is restricted by statute. The 
official public docket is the collection of materials that is available 
for public viewing at the EPA Docket Center, Rm. B102-Reading Room, EPA 
West, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket 
Center is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, 
excluding legal holidays. The EPA Docket Center Reading Room telephone 
number is (202) 566-1744 and the telephone number for the OPPT Docket, 
which is located in EPA Docket Center, is (202) 566-0280.
    2. Electronic access. You may access this Federal Register document 
electronically through the EPA Internet under the ``Federal Register'' 
listings at http://www.epa.gov/fedrgstr/.
    An electronic version of the public docket is available through 
EPA's electronic public docket and comment system, EPA Dockets. You may 
use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public 
comments, access the index listing of the contents of the official 
public docket, and to access those documents in the public docket that 
are available electronically. Although not all docket materials may be 
available electronically, you may still access any of the publicly 
available docket materials through the docket facility identified in 
Unit I.B.1. Once in the system, select ``search,'' then key in the 
appropriate docket ID number.
    Certain types of information will not be placed in the EPA Dockets. 
Information claimed as CBI and other information whose disclosure is 
restricted by statute, which is not included in the official public 
docket, will not be available for public viewing in EPA's electronic 
public docket. EPA's policy is that copyrighted material will not be 
placed in EPA's electronic public docket but will be available only in 
printed, paper form in the official public docket. To the extent 
feasible, publicly available docket materials will be made available in 
EPA's electronic public docket. When a document is selected from the 
index list in EPA Dockets, the system will identify whether the 
document is available for viewing in EPA's electronic public docket. 
Although not all docket materials may be available electronically, you 
may still access any of the publicly available docket materials through 
the docket facility identified in Unit I.B.1. EPA intends to work 
towards providing electronic access to all of the publicly available 
docket materials through EPA's electronic public docket.
    For public commenters, it is important to note that EPA's policy is 
that public comments, whether submitted electronically or in paper, 
will be made available for public viewing in EPA's electronic public 
docket as EPA receives them and without change, unless the comment 
contains copyrighted material, CBI, or other information whose 
disclosure is restricted by statute. When EPA identifies a comment 
containing copyrighted material, EPA will provide a reference to that 
material in the version of the comment that is placed in EPA's 
electronic public docket. The entire printed comment, including the 
copyrighted material, will be available in the public docket.
    Public comments submitted on computer disks that are mailed or 
delivered to the docket will be transferred to EPA's electronic public 
docket. Public comments that are mailed or delivered to the docket will 
be scanned and placed in EPA's electronic public docket. Where 
practical, physical objects will be photographed, and the photograph 
will be placed in EPA's electronic public docket along with a brief 
description written by the docket staff.

C. How and To Whom Do I Submit Comments?

    You may submit comments electronically, by mail, or through hand 
delivery/courier. To ensure proper receipt by EPA, identify the 
appropriate docket ID number and specific PMN number or TME number in 
the subject line on the first page of your comment. Please ensure that 
your comments are submitted within the specified comment period. 
Comments received after the close of the comment period will be marked 
``late.'' EPA is not required to consider these late comments. If you 
wish to submit CBI or information that is otherwise protected by 
statute, please follow the instructions in Unit I.D. Do not use EPA 
Dockets or e-mail to submit CBI or information protected by statute.
    1. Electronically. If you submit an electronic comment as 
prescribed in this unit, EPA recommends that you include your name, 
mailing address, and an e-mail address or other contact information in 
the body of your comment. Also include this contact information on the 
outside of any disk or CD ROM you submit, and in any cover letter 
accompanying the disk or CD ROM. This ensures that you can be 
identified as the submitter of the comment and allows EPA to contact 
you in case EPA cannot read your comment due to technical difficulties 
or needs further information on the substance of your comment. EPA's 
policy is that EPA will not edit your comment, and any identifying or 
contact information provided in the body of a comment will be included 
as part of the comment that is placed in the official public docket, 
and made available in EPA's electronic public docket. If EPA cannot 
read your comment due to technical difficulties and cannot contact you 
for clarification, EPA may not be able to consider your comment.
    i. EPA Dockets. Your use of EPA's electronic public docket to 
submit comments to EPA electronically is EPA's preferred method for 
receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket/, and follow the online instructions for submitting comments. 
Once in the system, select ``search,'' and then key in docket ID number 
OPPT-2004-0124. The system is an ``anonymous access'' system, which 
means EPA will not know your identity, e-mail address, or other contact 
information unless you provide it in the body of your comment.
    ii. E-mail. Comments may be sent by e-mail to [email protected], 
Attention: Docket ID Number OPPT-2004-0124 and PMN Number or TME 
Number. In contrast to EPA's electronic public docket, EPA's e-mail 
system is not an ``anonymous access'' system. If you send an e-mail 
comment directly to the docket without going through EPA's electronic 
public docket, EPA's e-mail system automatically captures your e-mail 
address. E-mail addresses that are automatically captured by EPA's e-
mail system are included as part of the comment that is placed in the 
official public docket, and made available in EPA's electronic public 
docket.
    iii. Disk or CD ROM. You may submit comments on a disk or CD ROM 
that you mail to the mailing address identified in Unit I.C.2. These 
electronic submissions will be accepted in WordPerfect or ASCII file 
format. Avoid the use of special characters and any form of encryption.
    2. By mail. Send your comments to: Document Control Office (7407M), 
Office of Pollution Prevention and Toxics (OPPT), Environmental 
Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-
0001.
    3. By hand delivery or courier. Deliver your comments to: OPPT 
Document Control Office (DCO) in EPA East Bldg., Rm. 6428, 1201 
Constitution Ave., NW., Washington, DC. Attention: Docket ID Number 
OPPT-2004-0124 and PMN Number or TME Number. The DCO is open from 8 
a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The 
telephone number for the DCO is (202) 564-8930.

[[Page 65191]]

D. How Should I Submit CBI to the Agency?

    Do not submit information that you consider to be CBI 
electronically through EPA's electronic public docket or by e-mail. You 
may claim information that you submit to EPA as CBI by marking any part 
or all of that information as CBI (if you submit CBI on disk or CD ROM, 
mark the outside of the disk or CD ROM as CBI and then identify 
electronically within the disk or CD ROM the specific information that 
is CBI). Information so marked will not be disclosed except in 
accordance with procedures set forth in 40 CFR part 2.
    In addition to one complete version of the comment that includes 
any information claimed as CBI, a copy of the comment that does not 
contain the information claimed as CBI must be submitted for inclusion 
in the public docket and EPA's electronic public docket. If you submit 
the copy that does not contain CBI on disk or CD ROM, mark the outside 
of the disk or CD ROM clearly that it does not contain CBI. Information 
not marked as CBI will be included in the public docket and EPA's 
electronic public docket without prior notice. If you have any 
questions about CBI or the procedures for claiming CBI, please consult 
the technical person listed under FOR FURTHER INFORMATION CONTACT.

E. What Should I Consider as I Prepare My Comments for EPA?

    You may find the following suggestions helpful for preparing your 
comments:
    1. Explain your views as clearly as possible.
    2. Describe any assumptions that you used.
    3. Provide copies of any technical information and/or data you used 
that support your views.
    4. If you estimate potential burden or costs, explain how you 
arrived at the estimate that you provide.
    5. Provide specific examples to illustrate your concerns.
    6. Offer alternative ways to improve the notice or collection 
activity.
    7. Make sure to submit your comments by the deadline in this 
document.
    8. To ensure proper receipt by EPA, be sure to identify the docket 
ID number assigned to this action and the specific PMN number you are 
commenting on in the subject line on the first page of your response. 
You may also provide the name, date, and Federal Register citation.

II. Why is EPA Taking this Action?

    Section 5 of TSCA requires any person who intends to manufacture 
(defined by statute to include import) a new chemical (i.e., a chemical 
not on the TSCA Inventory to notify EPA and comply with the statutory 
provisions pertaining to the manufacture of new chemicals. Under 
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a 
notice of receipt of a PMN or an application for a TME and to publish 
periodic status reports on the chemicals under review and the receipt 
of notices of commencement to manufacture those chemicals. This status 
report, which covers the period from October 4, 2004 to October 15, 
2004, consists of the PMNs pending or expired, and the notices of 
commencement to manufacture a new chemical that the Agency has received 
under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs

    This status report identifies the PMNs pending or expired, and the 
notices of commencement to manufacture a new chemical that the Agency 
has received under TSCA section 5 during this time period. If you are 
interested in information that is not included in the following tables, 
you may contact EPA as described in Unit II. to access additional non-
CBI information that may be available.
    In Table I of this unit, EPA provides the following information (to 
the extent that such information is not claimed as CBI) on the PMNs 
received by EPA during this period: the EPA case number assigned to the 
PMN; the date the PMN was received by EPA; the projected end date for 
EPA's review of the PMN; the submitting manufacturer; the potential 
uses identified by the manufacturer in the PMN; and the chemical 
identity.

                                            I. 26 Premanufacture Notices Received From: 10/04/04 to 10/15/04
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                                              Projected Notice End
              Case No.                    Received Date               Date           Manufacturer/Importer           Use                  Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-05-0012                            10/04/04                01/01/05                CBI                    (G) Intermediate raw   (G) Acrylate ester
                                                                                                             material, diluent in
                                                                                                             radiation cured
                                                                                                             coatings and
                                                                                                             adhesives
P-05-0013                            10/05/04                01/02/05                Marubeni Specialty     (S) Solvent in ink     (S) Ethane, 1-ethoxy-
                                                                                      Chemicals, Inc.                               2-(2-methoxyethoxy)-
P-05-0014                            10/05/04                01/02/05                Cytec Industries Inc.  (G) Antiscalant        (G) Polymer of maleic
                                                                                                                                    anhydride and
                                                                                                                                    substituted alkenes,
                                                                                                                                    potassium salt,
                                                                                                                                    persulfate-
                                                                                                                                    initiated.
P-05-0018                            10/06/04                01/03/05                CBI                    (G) Developer          (G) Diphenyl sulfone
P-05-0019                            10/07/04                01/04/05                Ashland Inc.,          (G) Adhesives,         (G) Norrish type I
                                                                                      Environmental Health   coatings, inks         acetophenone
                                                                                      and Safety                                    acetoacetic ester
P-05-0020                            10/07/04                01/04/05                Ashland Inc.,          (G) Adhesive,          (G) Multifunctional
                                                                                      Environmental Health   coating, ink           acrylate oligomer
                                                                                      and Safety                                    resin
P-05-0021                            10/07/04                01/04/05                Ashland Inc.,          (G) Adhesive,          (G) Multifunctional
                                                                                      Environmental Health   coating, ink           acrylate oligomer
                                                                                      and Safety                                    resin
P-05-0022                            10/07/04                01/04/05                Ashland Inc.,          (G) Adhesive,          (G) Multifunctional
                                                                                      Environmental Health   coating, ink           acrylate oligomer
                                                                                      and Safety                                    resin
P-05-0023                            10/07/04                01/04/05                Ashland Inc.,          (G) Adhesive,          (G) Multifunctional
                                                                                      Environmental Health   coating, ink           acrylate oligomer
                                                                                      and Safety                                    resin

[[Page 65192]]

 
P-05-0024                            10/07/04                01/04/05                Ashland Inc.,          (G) Adhesive,          (G) Multifunctional
                                                                                      Environmental Health   coating, ink           acrylate oligomer
                                                                                      and Safety                                    resin
P-05-0025                            10/07/04                01/04/05                Ashland Inc.,          (G) Adhesive,          (G) Multifunctional
                                                                                      Environmental Health   coating, ink           acrylate oligomer
                                                                                      and Safety                                    resin
P-05-0026                            10/08/04                01/05/05                H.B. Fuller            (G) Industrial         (G) Polyester
                                                                                                             adhesive               isocyanate polymer
P-05-0027                            10/08/04                01/05/05                H.B. Fuller            (G) Industrial         (G) Polyester
                                                                                                             adhesive               isocyanate polymer
P-05-0028                            10/08/04                01/05/05                CBI                    (G) Open, non-         (G) Substituted
                                                                                                             dispersive; reactant   pyrimidinetrione
                                                                                                             for manufacture of
                                                                                                             specialized coating
P-05-0029                            10/12/04                01/09/05                Syngenta Crop          (G) Raw material used  (G) Substituted
                                                                                      Protection, Inc.       in a closed reaction   aniline
                                                                                                             process to produce a
                                                                                                             chemical
                                                                                                             intermediate.
P-05-0030                            10/12/04                01/09/05                CBI                    (G) Coating material   (G) Acryrol
                                                                                                                                    derivatives
P-05-0031                            10/12/04                01/09/05                Reichhold, Inc.        (G) Resin              (S) Soybean oil,
                                                                                                             intermediate           mixed esters with
                                                                                                                                    pentaerythritol and
                                                                                                                                    tung oil
P-05-0032                            10/12/04                01/09/05                Aldrich Chemical       (G) Semiconductor      (S) Silicic acid
                                                                                      Company, Inc.          manufacturing          (h4sio4), tris(1,1-
                                                                                                                                    dimethylpropyl)
                                                                                                                                    ester
P-05-0033                            10/12/04                01/09/05                Syngenta Crop          (S) Chemical           (G) Substituted
                                                                                      Protection, Inc.       intermediate used to   benzene
                                                                                                             produce a pesticide
P-05-0034                            10/13/04                01/10/05                CBI                    (G) Closed, non-       (G) Esterified
                                                                                                             dispersive use.        functionalized alkyl
                                                                                                                                    methacrlate, polymer
                                                                                                                                    with butyl
                                                                                                                                    methacrylate,
                                                                                                                                    methoxy polyethylene
                                                                                                                                    glycol methacrylate
                                                                                                                                    and methyl acrylate.
P-05-0035                            10/13/04                01/10/05                Syngenta Crop          (G) Intermediate used  (G) Substituted aryl
                                                                                      Protection, Inc.       in producing a final   acetonitrile
                                                                                                             product that is 100%
                                                                                                             exported.
P-05-0036                            10/14/04                01/11/05                CBI                    (G) Additive for       (G) Alkyl
                                                                                                             lubricating oil        methacrylate
                                                                                                                                    copolymer
P-05-0037                            10/15/04                01/12/05                The Sherwin-Williams   (G) Paint              (G) Water-dispersed
                                                                                      Company                                       polyurethane latex
P-05-0038                            10/15/04                01/12/05                CBI                    (G) Metal working      (G)
                                                                                                             fluid                  Polyalkylenepolyamin
                                                                                                                                    e, alkyloxirane
                                                                                                                                    polymer
P-05-0040                            10/15/04                01/12/05                CBI                    (G) Additive for       (G) Modified starch-
                                                                                                             manufacture of         acrylate polymer
                                                                                                             articles
P-05-0041                            10/15/04                01/12/05                CBI                    (G) Additive for       (G) Ammonium-
                                                                                                             manufacture of         functional
                                                                                                             articles               polyethylene glycol
                                                                                                                                    acrylate polymer
--------------------------------------------------------------------------------------------------------------------------------------------------------

    In Table II of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the 
Notices of Commencement to manufacture received:

                            II. 11 Notices of Commencement From: 10/04/04 to 10/15/04
----------------------------------------------------------------------------------------------------------------
                                                                Commencement Notice
              Case No.                     Received Date             End Date                  Chemical
----------------------------------------------------------------------------------------------------------------
P-02-0272                             03/18/03                11/26/02                (G)D-glucopyranose,
                                                                                       oligomeric, bu glycosides
P-03-0728                             10/06/04                09/14/04                (G) Polyester polyol
P-04-0488                             10/08/04                10/05/04                (G) Acrylic polymer
P-04-0539                             10/13/04                09/01/04                (G) Urethaneacrylate
P-04-0545                             10/06/04                09/30/04                (G) Substituted
                                                                                       naphthalenesulfonic acid
                                                                                       azo substituted phenyl
                                                                                       amino substituted
                                                                                       triazine compound
P-04-0557                             10/07/04                09/20/04                (G) 1,3-
                                                                                       heteropolycycledione,
                                                                                       4,5,6,7-tetrafluoro-
P-04-0588                             10/05/04                09/14/04                (G) Modified polyacrylate
P-04-0643                             10/08/04                10/04/04                (G) 9-octadecenoic acid
                                                                                       (z)-, butyl ester,
                                                                                       polymer with propanediol,
                                                                                       5-isocyanato-1-
                                                                                       (isocyanatomethyl)-1,3,3-
                                                                                       trimethylcyclohexane, 2-
                                                                                       oxepanone,and 1,3,5-
                                                                                       tris(6-isocyanatohexyl)-
                                                                                       1,3,5-triazine-
                                                                                       2,4,6(1h,3h,5h)-trione.
P-04-0657                             10/13/04                09/29/04                (G) Trimethylolpropane
                                                                                       dialkyl diester
P-98-0996                             10/06/04                07/27/04                (S) Rutile, tin zinc
P-98-0997                             10/06/04                07/27/04                (G) Rutile, tin zinc
----------------------------------------------------------------------------------------------------------------


[[Page 65193]]

List of Subjects

    Environmental protection, Chemicals, Premanufacturer notices.

    Dated: November 1, 2004.
Vicki A. Simons,
Acting Director, Information Management Division, Office of Pollution 
Prevention and Toxics.

[FR Doc. 04-25101 Filed 11-9-04; 8:45 am]
BILLING CODE 6560-50-S