[Federal Register Volume 69, Number 197 (Wednesday, October 13, 2004)]
[Notices]
[Pages 60931-60932]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 04-22953]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

National Highway Traffic Safety Administration

[Docket No. NHTSA-2004-19291]


Notice of Receipt of Petition for Decision That Nonconforming 
1993 Mercedes Benz 190E Passenger Cars Are Eligible for Importation

AGENCY: National Highway Traffic Safety Administration, DOT.

ACTION: Notice of receipt of petition for decision that nonconforming 
passenger cars are eligible for importation.

-----------------------------------------------------------------------

SUMMARY: This document announces receipt by the National Highway 
Traffic Safety Administration (NHTSA) of a petition for a decision that 
1993 Mercedes Benz 190E passenger cars that were not originally 
manufactured to comply with all applicable Federal motor vehicle safety 
standards are eligible for importation into the United States because 
(1) they are substantially similar to vehicles that were originally 
manufactured for importation into and sale in the United States and 
that were certified by their manufacturer as complying with the safety 
standards, and (2) they are capable of being readily altered to conform 
to the standards.

DATES: The closing date for comments on the petition is November 12, 
2004.

ADDRESSES: Comments should refer to the docket number and notice 
number, and be submitted to: Docket Management, Room PL-401, 400 
Seventh St., SW., Washington, DC 20590. [Docket hours are from 9 a.m. 
to 5 p.m.]. Anyone is able to search the electronic form of all 
comments received into any of our dockets by the name of the individual 
submitting the comment (or signing the comment, if submitted on behalf 
of an association, business, labor union, etc.). You may review DOT's 
complete Privacy Act Statement in the Federal Register published on 
April 11, 2000 (Volume 65, Number 70; Pages 19477-78) or you may visit 
http://dms.dot.gov.

FOR FURTHER INFORMATION CONTACT: Coleman Sachs, Office of Vehicle 
Safety Compliance, NHTSA (202-366-3151).

SUPPLEMENTARY INFORMATION: 

Background

    Under 49 U.S.C. 30141(a)(1)(A), a motor vehicle that was not 
originally manufactured to conform to all applicable Federal motor 
vehicle safety standards shall be refused admission into the United 
States unless NHTSA has decided that the motor vehicle is substantially 
similar to a motor vehicle originally manufactured for importation into 
and sale in the United States, certified under 49 U.S.C. 30115, and of 
the same model year as the model of the motor vehicle to be compared, 
and is capable of being readily altered to conform to all applicable 
Federal motor vehicle safety standards.
    Petitions for eligibility decisions may be submitted by either 
manufacturers or importers who have registered with NHTSA pursuant to 
49 CFR part 592. As specified in 49 CFR 593.7, NHTSA publishes notice 
in the Federal Register of each petition that it receives, and affords 
interested persons an opportunity to comment on the petition. At the 
close of the comment period, NHTSA decides, on the basis of the 
petition and any comments that it has received, whether the vehicle is 
eligible for importation. The agency then publishes this decision in 
the Federal Register.
    J.K. Technologies, LLC (``JK''), of Baltimore, Maryland (Registered 
Importer RI-90-006) has petitioned NHTSA to decide whether 
nonconforming 1993 Mercedes Benz 190E passenger cars are eligible for 
importation into the United States. The vehicles which JK believes are 
substantially similar are 1993 Mercedes Benz 190E passenger cars that 
were manufactured for importation into, and sale in, the United States 
and certified by their manufacturer as conforming to all applicable 
Federal motor vehicle safety standards.
    The petitioner claims that it carefully compared non-U.S. certified 
1993 Mercedes Benz 190E passenger cars to their U.S.-certified 
counterparts, and found the vehicles to be substantially similar with 
respect to compliance with most Federal motor vehicle safety standards.
    JK submitted information with its petition intended to demonstrate 
that non-U.S. certified 1993 Mercedes Benz 190E passenger cars, as 
originally manufactured, conform to many Federal motor vehicle safety 
standards in the same manner as their U.S. certified counterparts, or 
are capable of being readily altered to conform to those standards.
    Specifically, the petitioner claims that non-U.S. certified 1993 
Mercedes Benz 190E passenger cars are identical to their U.S. certified 
counterparts with respect to compliance with Standard Nos. 102 
Transmission Shift Lever Sequence, Starter Interlock, and Transmission 
Braking Effect, 103 Windshield Defrosting and Defogging Systems, 104 
Windshield Wiping and Washing Systems, 105 Hydraulic Brake Systems, 106 
Brake Hoses, 107 Reflecting Surfaces, 109 New Pneumatic Tires, 113 Hood 
Latch System, 116 Motor Vehicle Brake Fluids, 118 Power-Operated 
Window, Partition, and Roof Panel Systems, 124 Accelerator Control 
Systems, 201 Occupant Protection in Interior Impact, 202 Head 
Restraints, 204 Steering Control Rearward Displacement, 205 Glazing 
Materials, 206 Door Locks and Door Retention Components, 207 Seating 
Systems, 209 Seat Belt Assemblies, 210 Seat Belt Assembly Anchorages, 
211 Wheel Nuts, Wheel Discs and Hub Caps, 212 Windshield Mounting, 214 
Side Impact Protection, 216 Roof Crush Resistance, 219 Windshield Zone 
Intrusion, 301 Fuel System Integrity, and 302 Flammability of Interior 
Materials

[[Page 60932]]

    In addition, the petitioner claims that the vehicles comply with 
the Bumper Standard found in 49 CFR part 581.
    The petitioner also contends that the vehicles are capable of being 
readily altered to meet the following standards, in the manner 
indicated:
    Standard No. 101 Controls and Displays: Installation of a U.S.-
model instrument cluster.
    Standard No. 108 Lamps, Reflective Devices and Associated 
Equipment: Replacement of the following with U.S.-model components: (a) 
Headlamp assemblies; (b) front side marker lamps; (c) taillamp 
assemblies that incorporate rear side marker lamps; and (d) rear high 
mounted stop lamp.
    Standard No. 110 Tire Selection and Rims: Installation of a tire 
information placard.
    Standard No. 111 Rearview Mirrors: Installation of a U.S.-model 
passenger side rearview mirror, or inscription of the required warning 
statement on the face of that mirror.
    Standard No. 114 Theft Protection: Installation of U.S. version 
software and a supplemental warning buzzer to meet the requirements of 
this standard.
    Standard No. 115 Vehicle Identification: Installation of a vehicle 
identification plate near the left windshield post to meet the 
requirements of this standard.
    Standard No. 208 Occupant Crash Protection: Installation of a seat 
belt warning buzzer, wired to the seat belt latch. The petitioner also 
states that the vehicles are equipped with dual front air bags, knee 
bolsters, and combination lap and shoulder belts at the outboard front 
seating positions and with combination lap and shoulder belts at the 
outboard rear seating positions. These seat belts are self-tensioning 
and capable of being released by means of a single red push button.
    Interested persons are invited to submit comments on the petition 
described above. Comments should refer to the docket number and be 
submitted to: Docket Management, Room PL-401, 400 Seventh St., SW., 
Washington, DC 20590. [Docket hours are from 9 a.m. to 5 p.m.]. It is 
requested but not required that 10 copies be submitted.
    All comments received before the close of business on the closing 
date indicated above will be considered, and will be available for 
examination in the docket at the above address both before and after 
that date. To the extent possible, comments filed after the closing 
date will also be considered. Notice of final action on the petition 
will be published in the Federal Register pursuant to the authority 
indicated below.

    Authority: 49 U.S.C. 30141(a)(1)(A) and (b)(1); 49 CFR 593.8; 
delegations of authority at 49 CFR 1.50 and 501.8.

Claude H. Harris,
Director, Office of Vehicle Safety Compliance.
[FR Doc. 04-22953 Filed 10-12-04; 8:45 am]
BILLING CODE 4910-59-P