[Federal Register Volume 69, Number 148 (Tuesday, August 3, 2004)]
[Notices]
[Pages 46537-46541]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 04-17644]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[OPPT-2004-0105; FRL-7673-3]


Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires 
any person who intends to manufacture (defined by statute to include 
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to 
notify EPA and comply with the statutory provisions pertaining to the 
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of 
TSC, EPA is required to publish a notice of receipt of a premanufacture 
notice (PMN) or an application for a test marketing exemption (TME), 
and to publish periodic status reports on the chemicals under review 
and the receipt of notices of commencement to manufacture those 
chemicals. This status report, which covers the period from June 28, 
2004 to July 9, 2004, consists of the PMNs, pending or expired, and the 
notices of commencement to manufacture a new chemical that the Agency 
has received under TSCA section 5 during this time period.
    EPA issued a notice in the Federal Register of July 12, 2004, 
concerning certain new chemicals; receipt and status information for 
June 14 to June 25, 2004. This document corrects the docket 
identification number.

DATES: Comments identified by the docket identification (ID) number 
OPPT-2004-0105 and the specific PMN number or TME number, must be 
received on or before September 2, 2004.

ADDRESSES: Comments may be submitted electronically, by mail, or 
through hand delivery/courier. Follow the detailed instructions as 
provided in Unit I. of the SUPPLEMENTARY INFORMATION.

FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator, 
Environmental Assistance Division, Office of Pollution Prevention and 
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania 
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; 
e-mail address: [email protected].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

    This action is directed to the public in general. As such, the 
Agency has not attempted to describe the specific entities that this 
action may apply to. Although others may be affected, this action 
applies directly to the submitter of the premanufacture notices 
addressed in the action. If you have any questions regarding the 
applicability of this action to a particular entity, consult the person 
listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Copies of this Document and Other Related Information?

    1. Docket. EPA has established an official public docket for this 
action under docket identification (ID) number OPPT-2004-0105. The 
official public docket consists of the documents specifically 
referenced in this action, any public comments received, and other 
information related to this action. Although a part of the official 
docket, the public docket does not include Confidential Business 
Information (CBI) or other information whose disclosure is restricted 
by statute. The official public docket is the collection of materials 
that is available for public viewing at the EPA Docket Center, Rm. 
B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, 
DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday 
through Friday, excluding legal holidays. The EPA Docket Center Reading 
Room telephone number is (202) 566-1744 and the telephone number for 
the OPPT Docket,

[[Page 46538]]

which is located in EPA Docket Center, is (202) 566-0280.
    2. Electronic access. You may access this Federal Register document 
electronically through the EPA Internet under the ``Federal Register'' 
listings at http://www.epa.gov/fedrgstr/.
    An electronic version of the public docket is available through 
EPA's electronic public docket and comment system, EPA Dockets. You may 
use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public 
comments, access the index listing of the contents of the official 
public docket, and to access those documents in the public docket that 
are available electronically. Although not all docket materials may be 
available electronically, you may still access any of the publicly 
available docket materials through the docket facility identified in 
Unit I.B.1. Once in the system, select ``search,'' then key in the 
appropriate docket ID number.
    Certain types of information will not be placed in the EPA Dockets. 
Information claimed as CBI and other information whose disclosure is 
restricted by statute, which is not included in the official public 
docket, will not be available for public viewing in EPA's electronic 
public docket. EPA's policy is that copyrighted material will not be 
placed in EPA's electronic public docket but will be available only in 
printed, paper form in the official public docket. To the extent 
feasible, publicly available docket materials will be made available in 
EPA's electronic public docket. When a document is selected from the 
index list in EPA Dockets, the system will identify whether the 
document is available for viewing in EPA's electronic public docket. 
Although not all docket materials may be available electronically, you 
may still access any of the publicly available docket materials through 
the docket facility identified in Unit I.B.1. EPA intends to work 
towards providing electronic access to all of the publicly available 
docket materials through EPA's electronic public docket.
    For public commenters, it is important to note that EPA's policy is 
that public comments, whether submitted electronically or in paper, 
will be made available for public viewing in EPA's electronic public 
docket as EPA receives them and without change, unless the comment 
contains copyrighted material, CBI, or other information whose 
disclosure is restricted by statute. When EPA identifies a comment 
containing copyrighted material, EPA will provide a reference to that 
material in the version of the comment that is placed in EPA's 
electronic public docket. The entire printed comment, including the 
copyrighted material, will be available in the public docket.
    Public comments submitted on computer disks that are mailed or 
delivered to the docket will be transferred to EPA's electronic public 
docket. Public comments that are mailed or delivered to the docket will 
be scanned and placed in EPA's electronic public docket. Where 
practical, physical objects will be photographed, and the photograph 
will be placed in EPA's electronic public docket along with a brief 
description written by the docket staff.

C. How and To Whom Do I Submit Comments?

    You may submit comments electronically, by mail, or through hand 
delivery/courier. To ensure proper receipt by EPA, identify the 
appropriate docket ID number and specific PMN number or TME number in 
the subject line on the first page of your comment. Please ensure that 
your comments are submitted within the specified comment period. 
Comments received after the close of the comment period will be marked 
``late.'' EPA is not required to consider these late comments. If you 
wish to submit CBI or information that is otherwise protected by 
statute, please follow the instructions in Unit I.D. Do not use EPA 
Dockets or e-mail to submit CBI or information protected by statute.
    1. Electronically. If you submit an electronic comment as 
prescribed in this unit, EPA recommends that you include your name, 
mailing address, and an e-mail address or other contact information in 
the body of your comment. Also include this contact information on the 
outside of any disk or CD ROM you submit, and in any cover letter 
accompanying the disk or CD ROM. This ensures that you can be 
identified as the submitter of the comment and allows EPA to contact 
you in case EPA cannot read your comment due to technical difficulties 
or needs further information on the substance of your comment. EPA's 
policy is that EPA will not edit your comment, and any identifying or 
contact information provided in the body of a comment will be included 
as part of the comment that is placed in the official public docket, 
and made available in EPA's electronic public docket. If EPA cannot 
read your comment due to technical difficulties and cannot contact you 
for clarification, EPA may not be able to consider your comment.
    i. EPA Dockets. Your use of EPA's electronic public docket to 
submit comments to EPA electronically is EPA's preferred method for 
receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket/, and follow the online instructions for submitting comments. 
Once in the system, select ``search,'' and then key in docket ID number 
OPPT-2004-0105. The system is an ``anonymous access'' system, which 
means EPA will not know your identity, e-mail address, or other contact 
information unless you provide it in the body of your comment.
    ii. E-mail. Comments may be sent by e-mail to [email protected], 
Attention: Docket ID Number OPPT-2004-0105 and PMN Number or TME 
Number. In contrast to EPA's electronic public docket, EPA's e-mail 
system is not an ``anonymous access'' system. If you send an e-mail 
comment directly to the docket without going through EPA's electronic 
public docket, EPA's e-mail system automatically captures your e-mail 
address. E-mail addresses that are automatically captured by EPA's e-
mail system are included as part of the comment that is placed in the 
official public docket, and made available in EPA's electronic public 
docket.
    iii. Disk or CD ROM. You may submit comments on a disk or CD ROM 
that you mail to the mailing address identified in Unit I.C.2. These 
electronic submissions will be accepted in WordPerfect or ASCII file 
format. Avoid the use of special characters and any form of encryption.
    2. By mail. Send your comments to: Document Control Office (7407M), 
Office of Pollution Prevention and Toxics (OPPT), Environmental 
Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-
0001.
    3. By hand delivery or courier. Deliver your comments to: OPPT 
Document Control Office (DCO) in EPA East Bldg., Rm. 6428, 1201 
Constitution Ave., NW., Washington, DC. Attention: Docket ID Number 
OPPT-20040105 and PMN Number or TME Number. The DCO is open from 8 a.m. 
to 4 p.m., Monday through Friday, excluding legal holidays. The 
telephone number for the DCO is (202) 564-8930.

D. How Should I Submit CBI to the Agency?

    Do not submit information that you consider to be CBI 
electronically through EPA's electronic public docket or by e-mail. You 
may claim information that you submit to EPA as CBI by marking any part 
or all of that information as CBI (if you submit CBI on disk or CD ROM, 
mark the outside of the disk or CD ROM as CBI and then identify 
electronically within the disk or CD ROM the specific information that 
is CBI). Information so marked will not be

[[Page 46539]]

disclosed except in accordance with procedures set forth in 40 CFR part 
2.
    In addition to one complete version of the comment that includes 
any information claimed as CBI, a copy of the comment that does not 
contain the information claimed as CBI must be submitted for inclusion 
in the public docket and EPA's electronic public docket. If you submit 
the copy that does not contain CBI on disk or CD ROM, mark the outside 
of the disk or CD ROM clearly that it does not contain CBI. Information 
not marked as CBI will be included in the public docket and EPA's 
electronic public docket without prior notice. If you have any 
questions about CBI or the procedures for claiming CBI, please consult 
the technical person listed under FOR FURTHER INFORMATION CONTACT.

E. What Should I Consider as I Prepare My Comments for EPA?

    You may find the following suggestions helpful for preparing your 
comments:
    1. Explain your views as clearly as possible.
    2. Describe any assumptions that you used.
    3. Provide copies of any technical information and/or data you used 
that support your views.
    4. If you estimate potential burden or costs, explain how you 
arrived at the estimate that you provide.
    5. Provide specific examples to illustrate your concerns.
    6. Offer alternative ways to improve the notice or collection 
activity.
    7. Make sure to submit your comments by the deadline in this 
document.
    8. To ensure proper receipt by EPA, be sure to identify the docket 
ID number assigned to this action and the specific PMN number you are 
commenting on in the subject line on the first page of your response. 
You may also provide the name, date, and Federal Register citation.

II. What Does this Correction Do?

    FR Doc. 04-15724 published in the Federal Register of July 12, 2004 
(69 FR 41802-41808) (FRL-7369-4) is corrected by changing the docket ID 
number ``OPPT-2004-0101'' to read ``OPPT-2004-0104'' everywhere it 
appears in the document.

III. Why is EPA Taking this Action?

    Section 5 of TSCA requires any person who intends to manufacture 
(defined by statute to include import) a new chemical (i.e., a chemical 
not on the TSCA Inventory to notify EPA and comply with the statutory 
provisions pertaining to the manufacture of new chemicals. Under 
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a 
notice of receipt of a PMN or an application for a TME and to publish 
periodic status reports on the chemicals under review and the receipt 
of notices of commencement to manufacture those chemicals. This status 
report, which covers the period from June 28, 2004 to July 9, 2004, 
consists of the PMNs pending or expired, and the notices of 
commencement to manufacture a new chemical that the Agency has received 
under TSCA section 5 during this time period.

IV. Receipt and Status Report for PMNs

    This status report identifies the PMNs pending or expired, and the 
notices of commencement to manufacture a new chemical that the Agency 
has received under TSCA section 5 during this time period. If you are 
interested in information that is not included in the following tables, 
you may contact EPA as described in Unit I.C. to access additional non-
CBI information that may be available.
    In Table I of this unit, EPA provides the following information (to 
the extent that such information is not claimed as CBI) on the PMNs 
received by EPA during this period: the EPA case number assigned to the 
PMN; the date the PMN was received by EPA; the projected end date for 
EPA's review of the PMN; the submitting manufacturer; the potential 
uses identified by the manufacturer in the PMN; and the chemical 
identity.

                                            I. 36 Premanufacture Notices Received From: 06/28/04 to 07/09/04
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                                              Projected Notice End
              Case No.                    Received Date               Date           Manufacturer/Importer           Use                  Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-04-0691                            06/28/04                09/25/04                CBI                    (S) Coating in         (G) Urethane acrylic
                                                                                                             textile and leather    hybrid polymer
                                                                                                             industries
P-04-0692                            06/28/04                09/25/04                CBI                    (S) Trifunctional      (G) Trifunctional
                                                                                                             acrylic ester used     acrylic ester
                                                                                                             in lacquer/dry film
                                                                                                             manufacture
P-04-0693                            06/28/04                09/25/04                CBI                    (S) Urethane acrylate  (G) Urethane acrylate
                                                                                                             oligomer used in       oligomer
                                                                                                             lacquer manufacture
P-04-0694                            06/28/04                09/25/04                CBI                    (G) Organic marker     (G) Organic marker
                                                                                                             for petroleum
                                                                                                             products
P-04-0695                            06/28/04                09/25/04                GE BETZ                (G) Metal treatment    (G) Alkanolamine
                                                                                                             compound               phenolic mannich
                                                                                                                                    adduct
P-04-0696                            06/29/04                09/26/04                CBI                    (S) Reactive dye for   (G) Substituted
                                                                                                             textile                naphthaline
                                                                                                                                    disulfonic acid
                                                                                                                                    alkali salt
P-04-0697                            06/29/04                09/26/04                CBI                    (S) Textile wet        (G) Quaternary amino
                                                                                                             processing, surface    modified silicone-
                                                                                                             treatment agent;       polyther copolymer
                                                                                                             homecare clothing
                                                                                                             softner for
                                                                                                             detergent
P-04-0698                            06/29/04                09/26/04                CBI                    (S) Textile wet        (G) Quaternary amino
                                                                                                             processing, surface    modified silicone-
                                                                                                             treatment agent;       polyther copolymer
                                                                                                             homecare clothing
                                                                                                             softener for
                                                                                                             detergent
P-04-0699                            06/29/04                09/26/04                CBI                    (S) Textile wet        (G) Quaternary amino
                                                                                                             processing, surface    modified silicone-
                                                                                                             treatment agent;       polyther copolymer
                                                                                                             homecare clothing
                                                                                                             softener for
                                                                                                             detergent
P-04-0700                            06/29/04                09/26/04                Petroferm, Inc.        (S) Slip and           (S) Poly(oxy-1,2-
                                                                                                             levelling additive     ethanediyl), .alpha.-
                                                                                                             to utra violet-and     (1-oxo-2-propenyl)-
                                                                                                             electronic beam-       .omega.-[3-[1,3,3,3-
                                                                                                             cured inks, paints     tetramethyl-1-
                                                                                                             and coatings;          [(trimethylsilyl)oxy
                                                                                                             oligomer in the        ]disiloxanyl]propoxy
                                                                                                             manufacture of         ]-
                                                                                                             polymeric materials

[[Page 46540]]

 
P-04-0701                            06/29/04                09/26/04                Petroferm, Inc.        (S) Slip and           (S) Poly(oxy-1,2-
                                                                                                             levelling additive     ethanediyl), .alpha.-
                                                                                                             to utra violet-and     (2-methyl-1-oxo-2-
                                                                                                             electronic beam-       propenyl)-.omega.-[3-
                                                                                                             cured inks, paints     [1,3,3,3-tetramethyl-
                                                                                                             and coatings;          1-
                                                                                                             oligomer in the        [(trimethylsilyl)oxy
                                                                                                             manufacture of         ]disiloxanyl]propoxy
                                                                                                             polymeric materials    ]-
P-04-0702                            06/30/04                09/27/04                CBI                    (G) Industrial         (G) Modified silicone
                                                                                                             structural materials   polymer
P-04-0703                            06/30/04                09/27/04                CBI                    (G) Component of       (G)
                                                                                                             manufactured           Spiro[isobenzofuran-
                                                                                                             consumer article-      1(3h),9'-
                                                                                                             contained use          [9h]polyheterocycle]-
                                                                                                                                    3-one, 3'-[hexyl(2-
                                                                                                                                    methylphenyl)amino]-
                                                                                                                                    6'-[(2-
                                                                                                                                    methylphenyl)amino
P-04-0704                            07/01/04                09/28/04                The P.D. George        (S) Electrical         (G) Polymer of
                                                                                      Company                insulation varnish     carboxylic acids,
                                                                                                                                    glycols, and epoxy
                                                                                                                                    resin.
P-04-0705                            07/01/04                09/28/04                The P.D. George        (S) Electrical         (G) Polymer of
                                                                                      Company                insulation varnish     carboxylic acids,
                                                                                                                                    glycols, and epoxy
                                                                                                                                    resin.
P-04-0706                            07/02/04                09/29/04                CBI                    (S) Processing aid     (G) Organosilane
                                                                                                             for elastomer          ester
                                                                                                             compounding
P-04-0707                            07/02/04                09/29/04                CBI                    (S) Processing aid     (G) Organosilane
                                                                                                             for elastomer          ester
                                                                                                             compounding
P-04-0708                            07/02/04                09/29/04                CBI                    (G) Industrial         (G) Telechelic
                                                                                                             structural materials   polyacrylates
P-04-0709                            07/02/04                09/29/04                CBI                    (G) Component of       (G) Substituted
                                                                                                             mixture for highly     acyclic alkenones
                                                                                                             dispersive
                                                                                                             applications.
P-04-0710                            07/06/04                10/03/04                CBI                    (G) Additive for       (G) Alkyl
                                                                                                             lubricants             methacrylate
                                                                                                                                    copolymer
P-04-0711                            07/07/04                10/04/04                CBI                    (G) Destructive use    (G) Aluminum complex
P-04-0712                            07/08/04                10/05/04                CBI                    (S) Azole polymer      (G) Azole polymer
                                                                                                             used as an additive
                                                                                                             for plating baths
P-04-0713                            07/08/04                10/05/04                Forbo Adhesives, LLC   (G) Hot melt           (G) Isocyanate
                                                                                                             polyurethane           functional polyester
                                                                                                             adhesive               polyether urethane
                                                                                                                                    polymer
P-04-0714                            07/08/04                10/05/04                CBI                    (S) Disperse dye for   (G) Substituted
                                                                                                             textile                propanenitrile
P-04-0715                            07/08/04                10/05/04                CBI                    (G) Polymeric coating  (G) Acrylic copolymer
                                                                                                             vehicle
P-04-0716                            07/08/04                10/05/04                Degussa Corporation    (S) Mechanical rubber  (S) Silicia, [[(3-
                                                                                                             goods                  thiocyanatopropyl)si
                                                                                                                                    lylidyne]tris(oxy)]-
                                                                                                                                    modified
P-04-0717                            07/08/04                10/05/04                CBI                    (G) This material is   (G)
                                                                                                             frequently used in     Tetramethylammonium
                                                                                                             cleaning substrate     halo salt
                                                                                                             in the semiconductor
                                                                                                             and flat panel
                                                                                                             industry; this
                                                                                                             material is
                                                                                                             particularly useful
                                                                                                             to give extremely
                                                                                                             clean surfaces of
                                                                                                             the substrate.
P-04-0718                            07/08/04                10/05/04                CBI                    (G) Catalyst           (G) Substituted aryl
                                                                                                                                    sulfonium
                                                                                                                                    polyfluorophosphate
                                                                                                                                    salts
P-04-0719                            07/09/04                10/06/04                CBI                    (G) Coating resin,     (G) Aminosilane
                                                                                                             for open, non-         modified elastomer
                                                                                                             dispersive use
P-04-0720                            07/09/04                10/06/04                CBI                    (G) Coating resin,     (G) Aminosilane
                                                                                                             for open, non-         modified elastomer
                                                                                                             dispersive use
P-04-0722                            07/09/04                10/06/04                CBI                    (G) Nonwoven binder    (G) Acrylic polymer
                                                                                                             intermediate
P-04-0723                            07/09/04                10/06/04                CBI                    (G) Nonwoven binder    (G) Acrylic polymer
P-04-0724                            07/09/04                10/06/04                CBI                    (G) Nonwoven binder    (G) Acrylic polymer
                                                                                                             intermediate
P-04-0725                            07/09/04                10/06/04                CBI                    (G) Nonwoven binder    (G) Acrylic polymer
P-04-0726                            07/09/04                10/06/04                CBI                    (G) Nonwoven binder    (G) Acrylic polymer
                                                                                                             intermediate
P-04-0727                            07/09/04                10/06/04                CBI                    (G) Nonwoven binder    (G) Acrylic polymer
--------------------------------------------------------------------------------------------------------------------------------------------------------

    In Table II of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the 
Notices of Commencement to manufacture received:

                            II. 12 Notices of Commencement From: 06/28/04 to 07/09/04
----------------------------------------------------------------------------------------------------------------
                                                                Commencement Notice
              Case No.                     Received Date             End Date                  Chemical
----------------------------------------------------------------------------------------------------------------
P-04-0052                             07/02/04                06/17/04                (G) Cationic
                                                                                       polyacrylamide
P-04-0079                             06/28/04                05/26/04                (G) Halogen-substituted
                                                                                       oxetane
P-04-0244                             07/08/04                06/17/04                (S) Ethane, 2-bromo-1,1-
                                                                                       difluoro-
P-04-0267                             07/09/04                06/04/04                (G) Aromatic polyether
                                                                                       polyester polyurethane
P-04-0340                             07/06/04                06/21/04                (G) Polyoxyether salt
P-04-0384                             07/08/04                06/26/04                (G) Aliphatic
                                                                                       polyethertriamine
P-04-0400                             07/01/04                06/28/04                (G) Styrene-butadiene
                                                                                       copolymer latex
P-04-0401                             07/01/04                06/28/04                (G) Styrene-butadiene
                                                                                       copolymer latex

[[Page 46541]]

 
P-04-0418                             06/29/04                06/09/04                (G) Polysiloxane
P-04-0420                             06/29/04                06/08/04                (G) Polysiloxane
P-04-0441                             07/08/04                06/18/04                (G) Bisphenol A type epoxy
                                                                                       resin salt
P-96-1006                             06/30/04                06/16/04                (S) 1,3-dioxolane, 2-
                                                                                       ethenyl-
----------------------------------------------------------------------------------------------------------------

List of Subjects

    Environmental protection, Chemicals, Premanufacturer notices.

    Dated: July 26, 2004.
Anthony Cheatham,
Acting Director, Information Management Division, Office of Pollution 
Prevention and Toxics.
[FR Doc. 04-17644 Filed 8-2-04; 8:45 am]
BILLING CODE 6560-50-S