[Federal Register Volume 69, Number 111 (Wednesday, June 9, 2004)]
[Notices]
[Pages 32329-32330]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 04-12960]


=======================================================================
-----------------------------------------------------------------------

CONSUMER PRODUCT SAFETY COMMISSION


Proposed Collection of Information; Comment Request--Safety 
Standard for Bicycle Helmets

AGENCY: Consumer Product Safety Commission.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: As required by the Paperwork Reduction Act of 1995 (44 U.S.C. 
Chapter 35), the Consumer Product Safety Commission requests comments 
on a proposed extension of approval of a collection of information from 
manufacturers and importers of bicycle helmets. The collection of 
information is in regulations implementing the Safety Standard for 
Bicycle Helmets. 16 CFR part 1203. These regulations establish testing 
and recordkeeping requirements for manufacturers and importers of 
bicycle helmets subject to the standard. The Commission will consider 
all comments received in response to this notice before requesting an 
extension of approval of this collection of information from the Office 
of Management and Budget.

DATES: Written comments must be received by the Office of the Secretary 
not later than August 9, 2004.

ADDRESSES: Written comments should be mailed to the Office of the 
Secretary, Consumer Product Safety Commission, Washington, DC 20207, or 
delivered to that office, room 502, 4330 East-West Highway, Bethesda, 
Maryland, 20814. Alternatively, comments may be filed by telefacsimile 
to (301) 504-0127 or by e-mail to [email protected]. Comments should be 
captioned ``Bicycle Helmets.''

FOR FURTHER INFORMATION CONTACT: For information about the proposed 
extension of approval of the collection of information, or to obtain a 
copy of 16 CFR part 1203, call or write Linda L. Glatz, Office of 
Planning and Evaluation, Consumer Product Safety Commission, 
Washington, DC 20207; telephone (301) 504-7671, or by e-mail to 
[email protected].

SUPPLEMENTARY INFORMATION: 
    In 1994, Congress passed the ``Child Safety Protection Act,'' 
which, among other things, included the ``Children's Bicycle Helmet 
Safety Act of 1994'' Pub. L. 103-267, 108 Stat. 726. This law directed 
the Commission to issue a final standard applicable to bicycle helmets 
that would replace several existing voluntary standards with a single 
uniform standard that would include provisions to protect against the 
risk of helmets coming off the heads of bicycle riders, address the 
risk of injury to children, and cover other issues as appropriate. The 
Commission issued the final bicycle helmet standard in 1998. It is 
codified at 16 CFR part 1203.
    The standard requires all bicycle helmets manufactured after March 
10, 1999, to meet impact-attenuation and other requirements. The 
standard also contains testing and recordkeeping requirements to ensure 
that bicycle helmets meet the standard's requirements. Certification 
regulations implementing the standard require manufacturers, importers, 
and private labelers of bicycle helmets subject to the standard to (1) 
perform tests to demonstrate that those products meet the requirements 
of the standard, (2) maintain records of those tests, and (3) affix 
permanent labels to the helmets stating that the helmet complies with 
the applicable standard. The certification regulations are codified at 
16 CFR part 1203, subpart B.
    The Commission uses the information compiled and maintained by 
manufacturers, importers, and private labelers of bicycle helmets 
subject to the standard to help protect the public from risks of injury 
or death associated with head injury associated with bicycle riding. 
More specifically, this information helps the Commission determine 
whether bicycle helmets subject to the standard comply with all 
applicable requirements. The Commission also uses this information to 
obtain corrective actions if bicycle helmets fail to comply with the 
standard in a manner that creates a substantial risk of injury to the 
public.
    The Office of Management and Budget (OMB) approved the collection 
of information in the certification regulations under control number 
3041-0127. The Commission now proposes to request an extension of 
approval without change for the collection of information in the 
certification regulations.

Estimated Burden

    The Commission staff estimates that approximately 30 firms 
manufacture or import bicycle helmets subject to the standard. There 
are an estimated 200 different models of bicycle helmets currently 
marketed in the U.S. The Commission staff estimates that the time 
required to comply with the collection of information requirements is 
approximately 100 to 150 hours per model per year. The total amount of 
time estimated for compliance with these requirements will be 20,000 to 
30,000 hours per year (200 models x 100-150 hours/model = 20,000-30,000 
hours). The annualized cost to respondents for the hour burden for 
collection of information is $489,600-$734,400 based on 20,000-30,000 
hours times $24.48/hour (based on total compensation of all civilian 
workers in the U.S., September 2003, Bureau of Labor Statistics).

Request for Comments

    The Commission solicits written comments from all interested 
persons about the proposed collection of information. The Commission 
specifically solicits information relevant to the following topics:

--Whether the collection of information described above is necessary 
for the proper performance of the Commission's functions, including 
whether the information would have practical utility;
--Whether the estimated burden of the proposed collection of 
information is accurate;
--Whether the quality, utility, and clarity of the information to be 
collected could be enhanced; and
--Whether the burden imposed by the collection of information could be 
minimized by use of automated, electronic or other technological

[[Page 32330]]

collection techniques, or other forms of information technology.

    Dated: June 2, 2004.
Todd A. Stevenson,
Secretary, Consumer Product Safety Commission.
[FR Doc. 04-12960 Filed 6-8-04; 8:45 am]
BILLING CODE 6355-01-P