[Federal Register Volume 69, Number 67 (Wednesday, April 7, 2004)]
[Notices]
[Pages 18418-18420]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 04-7884]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

National Highway Traffic Safety Administration

[Docket No. NHTSA-2004-17473]


Notice of Receipt of Petition for Decision That Nonconforming 
2002-2004 Porsche 911(996) Carrera Passenger Cars Are Eligible for 
Importation

AGENCY: National Highway Traffic Safety Administration, DOT.

ACTION: Notice of receipt of petition for decision that nonconforming 
2002-2004 Porsche 911(996) Carrera passenger cars are eligible for 
importation.

-----------------------------------------------------------------------

SUMMARY: This document announces receipt by the National Highway 
Traffic Safety Administration (NHTSA) of a petition for a decision that 
2002-2004 Porsche 911 (996) Carrera passenger cars that were not 
originally manufactured to comply with all applicable Federal motor 
vehicle safety standards are eligible for importation into the United 
States because (1) they are substantially similar to vehicles that were 
originally manufactured for importation into and sale in the United 
States and that were certified by their manufacturer as complying with 
the safety standards, and (2) they are capable of being readily altered 
to conform to the standards.

DATES: The closing date for comments on the petition is May 7, 2004.

ADDRESSES: Comments should refer to the docket number and notice 
number, and be submitted to: Docket Management, Room PL-401, 400 
Seventh St., SW., Washington, DC 20590. (Docket hours are from 9 a.m. 
to 5 p.m.) Anyone is able to search the electronic form of all comments 
received into any of our dockets by the name of the individual 
submitting the comment (or signing the comment, if submitted on behalf 
of an association, business, labor union, etc.). You may review DOT's 
complete Privacy Act Statement in the Federal Register published on 
April 11, 2000 (volume 65, number 70, pages 19477-78), or you may visit 
http://dms.dot.gov.

[[Page 18419]]


FOR FURTHER INFORMATION CONTACT: Coleman Sachs, Office of Vehicle 
Safety Compliance, NHTSA (202-366-3151).

SUPPLEMENTARY INFORMATION:

Background

    Under 49 U.S.C. 30141(a)(1)(A), a motor vehicle that was not 
originally manufactured to conform to all applicable Federal motor 
vehicle safety standards shall be refused admission into the United 
States unless NHTSA has decided that the motor vehicle is substantially 
similar to a motor vehicle originally manufactured for importation into 
and sale in the United States, certified under 49 U.S.C. 30115, and of 
the same model year as the model of the motor vehicle to be compared, 
and is capable of being readily altered to conform to all applicable 
Federal motor vehicle safety standards.
    Petitions for eligibility decisions may be submitted by either 
manufacturers or importers who have registered with NHTSA pursuant to 
49 CFR part 592. As specified in 49 CFR 593.7, NHTSA publishes notice 
in the Federal Register of each petition that it receives, and affords 
interested persons an opportunity to comment on the petition. At the 
close of the comment period, NHTSA decides, on the basis of the 
petition and any comments that it has received, whether the vehicle is 
eligible for importation. The agency then publishes this decision in 
the Federal Register.
    US SPECS (Registered Importer 03-321) of Aberdeen, Maryland has 
petitioned NHTSA to decide whether 2002-2004 Porsche 911 (996) Carrera 
passenger cars are eligible for importation into the United States. The 
vehicles that U.S. SPECS believes are substantially similar are 2002-
2004 Porsche 911 (996) Carrera passenger cars that were manufactured 
for importation into, and sale in, the United States and certified by 
their manufacturer as conforming to all applicable Federal motor 
vehicle safety standards.
    The petitioner claims that it compared non-U.S. certified 2002-2004 
Porsche 911 (996) Carrera passenger cars to their U.S.-certified 
counterparts, and found the vehicles to be substantially similar with 
respect to compliance with most Federal motor vehicle safety standards.
    US SPECS submitted information with its petition intended to 
demonstrate that non-U.S. certified 2002-2004 Porsche 911 (996) Carrera 
passenger cars, as originally manufactured, conform to many Federal 
motor vehicle safety standards in the same manner as their U.S. 
certified counterparts, or are capable of being readily altered to 
conform to those standards.
    Specifically, the petitioner claims that non-U.S. certified 2002-
2004 Porsche 911 (996) Carrera passenger cars are identical to their 
U.S. certified counterparts with respect to compliance with Standard 
Nos. 102 Transmission Shift Lever Sequence, 103 Defrosting and 
Defogging Systems, 104 Windshield Wiping and Washing Systems, 106 Brake 
Hoses, 109 New Pneumatic Tires, 113 Hood Latch Systems, 116 Brake 
Fluid, 124 Accelerator Control Systems, 135 Passenger Car Brake 
Systems, 201 Occupant Protection in Interior Impact, 202 Head 
Restraints, 204 Steering Control Rearward Displacement, 205 Glazing 
Materials, 206 Door Locks and Door Retention Components, 207 Seating 
Systems, 210 Seat Belt Assembly Anchorages, 212 Windshield Mounting, 
214 Side Impact Protection, 216 Roof Crush Resistance, 219 Windshield 
Zone Intrusion, 302 Flammability of Interior Materials, and 401 
Interior Trunk Release.
    Petitioner also contends that the vehicles are capable of being 
readily altered to meet the following standards, in the manner 
indicated:
    Standard No. 101 Controls and Displays: Modification of the 
speedometer so that it is calibrated in miles per hour (MPH).
    Standard No. 108 Lamps, Reflective Devices and Associated 
Equipment: Installation of the following components on vehicles that 
are not already so equipped: (a) U.S.-model headlamps and front 
sidemarker lights; (b) U.S.-model taillamp assemblies, which 
incorporate rear sidemarker lights; (c) U.S.-model high-mounted stop 
light assembly; (d) compliant front and rear side reflex reflectors.
    Standard No. 110 Tire Selection and Rims: Installation of a tire 
information placard.
    Standard No. 111 Rearview Mirrors: Inscription of the required 
warning statement on the passenger side rearview mirror, or replacement 
of that mirror with a U.S.-model component.
    Standard No. 114 Theft Protection: Installation of a key warning 
buzzer if the vehicles are not already so equipped.
    Standard No. 118 Power-Operated Window Partition, and Roof Panel 
Systems: Programming of the vehicles or rewiring them, as required, to 
ensure compliance with the standard.
    Standard No. 201 Occupant Protection In Interior Impact: Inspection 
of all vehicles and installation of U.S.-model components, as 
necessary, to ensure compliance with the standard. The petitioner 
expressed the belief that the vehicles do in fact comply with the 
standard.
    Standard No. 208 Occupant Crash Protection: (a) Installation of an 
audible warning buzzer which is wired to the seat belt latches to 
ensure that the seat belt warning system activates in the proper 
manner; (b) inspection of all vehicles and installation of U.S.-model 
components, as necessary, to ensure compliance with the standard. The 
petitioner states that the vehicles are equipped with a seat belt 
warning lamp that is identical to the component used on the vehicles' 
U.S.-certified counterparts. The petitioner further states that the 
vehicles are equipped with dual front air bags and knee bolsters, and 
with combination lap and shoulder belts at the front and rear outboard 
seating positions that are self-tensioning and released by means of a 
single red push button.
    Standard No. 209 Seat Belt Assemblies: inspection of all vehicles 
and installation of U.S.-model passenger side components, if not 
already so equipped, to ensure compliance with the standard. The 
petitioner expressed the belief that the vehicles do in fact comply 
with the standard.
    Standard No. 225 Child Restraint Anchorage Systems: inspection of 
all vehicles and installation of U.S.-model components, as necessary, 
to ensure compliance with the standard.
    301 Fuel System Integrity: Inspection of all vehicles and 
installation of U.S.-model components on vehicles that are not already 
so equipped, to ensure compliance with the standard.
    Petitioner states that all vehicles must be inspected to ensure 
compliance with the Bumper Standard found at 49 CFR part 581 and that 
U.S.-model components will be installed, as necessary on vehicles that 
are not already so equipped. The petitioner expressed the belief that 
the vehicles do in fact comply with this standard.
    The petitioner states that the vehicles are exempt from the Theft 
Prevention Standard at 49 CFR part 541 because they are equipped with 
antitheft devices.
    The petitioner also states that a vehicle identification plate must 
be affixed to the vehicles near the left windshield post to meet the 
requirements of 49 CFR part 565.
    Interested persons are invited to submit comments on the petition 
described above. Comments should refer to the docket number and be 
submitted to: Docket Management, Room PL-401, 400 Seventh St., SW., 
Washington, DC 20590. (Docket hours are from 9 a.m. to 5 p.m.) It is 
requested but not required that 10 copies be submitted.

[[Page 18420]]

    All comments received before the close of business on the closing 
date indicated above will be considered, and will be available for 
examination in the docket at the above address both before and after 
that date. To the extent possible, comments filed after the closing 
date will also be considered. Notice of final action on the petition 
will be published in the Federal Register pursuant to the authority 
indicated below.

    Authority: 49 U.S.C. 30141(a)(1)(A) and (b)(1); 49 CFR 593.8; 
delegations of authority at 49 CFR 1.50 and 501.8.

    Issued on: April 2, 2004.
Kenneth N. Weinstein,
Associate Administrator for Enforcement.
[FR Doc. 04-7884 Filed 4-6-04; 8:45 am]
BILLING CODE 4910-59-P