[Federal Register Volume 69, Number 67 (Wednesday, April 7, 2004)]
[Notices]
[Pages 18349-18350]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 04-7874]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
[A-549-817]
Certain Hot-Rolled Carbon Steel Flat Products from Thailand:
Rescission of Antidumping Duty Administrative Review
AGENCY: Import Administration, International Trade Administration,
Department of Commerce.
ACTION: Notice of Rescission of Antidumping Duty Administrative Review.
-----------------------------------------------------------------------
EFFECTIVE DATE: April 7, 2004.
FOR FURTHER INFORMATION CONTACT: Ann Barnett-Dahl or Helen Kramer at
(202) 482-3833 or (202) 482-0405, respectively; Antidumping and
Countervailing Duty Enforcement Group III, Import Administration,
International Trade Administration, U.S. Department of Commerce, 14th
Street and Constitution Avenue, N.W., Washington, DC 20230.
SUMMARY: On December 24, 2003, in response to requests made by Nucor
Corporation (``Nucor'') and U.S. Steel Corporation (``U.S. Steel''),
the Department of Commerce (the Department) published in the Federal
Register (68 FR 74550-02) a notice announcing the initiation of an
administrative review of the antidumping duty order on certain hot-
rolled carbon steel flat products from Thailand. The review period is
November 1, 2002 October 31, 2003. This review has now been rescinded
because Nucor and U.S. Steel have withdrawn their requests for review.
Scope of the Review
For purposes of this review, the products covered are certain hot-
rolled carbon steel flat products of a rectangular shape, of a width of
0.5 inch or greater, neither clad, plated, nor coated with metal and
whether or not painted, varnished, or coated with plastics or other
non-metallic substances, in coils (whether or not in successively
superimposed layers), regardless of thickness, and in straight lengths,
of a thickness of less than 4.75 mm and of a width measuring at least
10 times the thickness. Universal mill plate (i.e., flat-rolled
products rolled on four faces or in a closed box pass, of a width
exceeding 150 mm, but not exceeding 1250 mm, and of a thickness of not
less than 4.0 mm, not in coils and without patterns in relief) of a
thickness not less than 4.0 mm is not included within the scope of this
review.
Specifically included within the scope of this review are vacuum
degassed, fully stabilized (commonly referred to as interstitial-free
(IF)) steels, high strength low alloy (HSLA) steels, and the substrate
for motor lamination steels. IF steels are recognized as low carbon
steels with micro-alloying levels of elements such as titanium or
niobium (also commonly referred to as columbium), or both, added to
stabilize carbon and nitrogen elements. HSLA steels are recognized as
steels with micro-alloying levels of elements such as chromium, copper,
niobium, vanadium, and molybdenum. The substrate for motor lamination
steels contains micro-alloying levels of elements such as silicon and
aluminum.
Steel products to be included in the scope of this review,
regardless of
[[Page 18350]]
definitions in the Harmonized Tariff Schedule of the United States
(HTSUS), are products in which: i) iron predominates, by weight, over
each of the other contained elements; ii) the carbon content is 2
percent or less, by weight; and iii) none of the elements listed below
exceeds the quantity, by weight, respectively indicated:
1.80 percent of manganese, or
2.25 percent of silicon, or
1.00 percent of copper, or
0.50 percent of aluminum, or
1.25 percent of chromium, or
0.30 percent of cobalt, or
0.40 percent of lead, or
1.25 percent of nickel, or
0.30 percent of tungsten, or
0.10 percent of molybdenum, or
0.10 percent of niobium, or
0.15 percent of vanadium, or
0.15 percent of zirconium.
All products that meet the physical and chemical description
provided above are within the scope of this review unless otherwise
excluded. The following products, by way of example, are outside or
specifically excluded from the scope of this review:
Alloy hot-rolled steel products in which at
least one of the chemical elements exceeds those listed above
(including, e.g., American Society for Testing and Materials (ASTM)
specifications A543, A387, A514, A517, A506).
Society of Automotive Engineers (SAE)/American
Iron & Steel Institute (AISI) grades of series 2300 and higher.
Ball bearing steels, as defined in the HTSUS.
Tool steels, as defined in the HTSUS.
Silico-manganese (as defined in the HTSUS) or
silicon electrical steel with a silicon level exceeding 2.25 percent.
ASTM specifications A710 and A736.
USS abrasion-resistant steels (USS AR 400, USS
AR 500).
All products (proprietary or otherwise) based on
an alloy ASTM specification (sample specifications: ASTM A506, A507).
Non-rectangular shapes, not in coils, which are
the result of having been processed by cutting or stamping and which
have assumed the character of articles or products classified outside
chapter 72 of the HTSUS.
The merchandise subject to this review is classified in the HTSUS
at subheadings: 7208.10.15.00, 7208.10.30.00, 7208.10.60.00,
7208.25.30.00, 7208.25.60.00, 7208.26.00.30, 7208.26.00.60,
7208.27.00.30, 7208.27.00.60, 7208.36.00.30, 7208.36.00.60,
7208.37.00.30, 7208.37.00.60, 7208.38.00.15, 7208.38.00.30,
7208.38.00.90, 7208.39.00.15, 7208.39.00.30, 7208.39.00.90,
7208.40.60.30, 7208.40.60.60, 7208.53.00.00, 7208.54.00.00,
7208.90.00.00, 7211.14.00.90, 7211.19.15.00, 7211.19.20.00,
7211.19.30.00, 7211.19.45.00, 7211.19.60.00, 7211.19.75.30,
7211.19.75.60, and 7211.19.75.90. Certain hot-rolled carbon steel flat
products covered by this review, including: vacuum degassed fully
stabilized; high strength low alloy; and the substrate for motor
lamination steel may also enter under the following tariff numbers:
7225.11.00.00, 7225.19.00.00, 7225.30.30.50, 7225.30.70.00,
7225.40.70.00, 7225.99.00.90, 7226.11.10.00, 7226.11.90.30,
7226.11.90.60, 7226.19.10.00, 7226.19.90.00, 7226.91.50.00,
7226.91.70.00, 7226.91.80.00, and 7226.99.00.00. Subject merchandise
may also enter under 7210.70.30.00, 7210.90.90.00, 7211.14.00.30,
7212.40.10.00, 7212.40.50.00, and 7212.50.00.00. Although the HTSUS
subheadings are provided for convenience and CBP purposes, the written
description of the merchandise under review is dispositive.
Background
On November 26, 2003, Nucor, and on November 28, 2003, U.S. Steel
(Petitioners) requested an administrative review of the antidumping
duty order on certain hot-rolled carbon steel flat products from
Thailand. On December 24, 2003, the Department published in the Federal
Register (68 FR 74550-02) Notice of Initiation of Antidumping and
Countervailing Duty Administrative Review. On March 19, 2003, both
Nucor and U.S. Steel withdrew their requests for review. The applicable
regulation, 19 CFR 351.213(d)(1), states that if a party that requested
an administrative review withdraws the request within 90 days of the
publication of the notice of initiation of the requested review, the
Secretary will rescind the review. Given that Nucor and U.S. Steel were
the only parties to request the administrative review, and their
withdrawal requests are timely, we are rescinding this review of the
antidumping duty order on certain hot-rolled carbon steel flat products
from Thailand covering the period November 1, 2002 to October 31, 2003.
This notice is issued and published in accordance with section
777(i) of the Act and 19 CFR 351.213(d)(4).
Dated: March 31, 2004.
Jeffery A. May,
Acting Assistant Secretary for Import Administration.
[FR Doc. 04-7874 Filed 4-6-04; 8:45 am]
BILLING CODE 3510-DS-S