[Federal Register Volume 69, Number 44 (Friday, March 5, 2004)]
[Notices]
[Pages 10489-10490]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 04-4919]


-----------------------------------------------------------------------

NUCLEAR REGULATORY COMMISSION


Draft Regulatory Guide; Issuance, Availability

    This notice is reprinted to correct the title of Draft Regulatory 
Guide DG-7004. The original notice was published on February 25, 2004.
    The Nuclear Regulatory Commission (NRC) has issued for public 
comment a proposed revision of a guide in its Regulatory Guide Series. 
Regulatory guides are developed to describe and make available to the 
public such information as methods acceptable to the NRC staff for 
implementing specific parts of the NRC's regulations, techniques used 
by the staff in evaluating specific problems or postulated accidents, 
and data needed by the staff in its review of applications for permits 
and licenses.
    The draft guide is temporarily identified by its task number, DG-
7004, which should be mentioned in all correspondence concerning this 
draft guide. Draft Regulatory Guide DG-7004, ``Establishing Quality 
Assurance Programs for Packaging Used in Transport of Radioactive 
Material,'' is the proposed Revision 2 of Regulatory Guide 7.10. This 
revision is being developed to provide guidance on developing Quality 
Assurance Programs with respect to the transport of radioactive 
materials in Type B and fissile material packages.
    This draft guide has not received complete staff approval and does 
not represent an official NRC staff position.
    Comments may be accompanied by relevant information or supporting 
data. Written comments may be submitted by mail to the Rules and 
Directives Branch, Office of Administration, U.S. Nuclear Regulatory 
Commission, Washington, DC 20555; or they may be hand-delivered to the 
Rules and Directives Branch, Office of Administration, at 11555 
Rockville Pike, Rockville, MD. Copies of comments received may be 
examined at the NRC Public Document Room, 11555 Rockville Pike, 
Rockville, MD. Comments will be most helpful if received by April 25, 
2004.
    You may also provide comments via the NRC's interactive rulemaking 
Web site through the NRC home page (http://www.nrc.gov). This site 
provides the ability to upload comments as files (any format) if your 
web browser supports that function. For information about the 
interactive rulemaking web site, contact Ms. Carol Gallagher, (301) 
415-5905; e-mail [email protected]. For technical information about Draft 
Regulatory Guide DG-7004, contact Mr. J. Pearson

[[Page 10490]]

at (301) 415-1985 (e-mail [email protected]).
    Although a deadline is given for comments on these draft guides, 
comments and suggestions in connection with items for inclusion in 
guides currently being developed or improvements in all published 
guides are encouraged at any time.
    Regulatory guides are available for inspection at the NRC's Public 
Document Room, 11555 Rockville Pike, Rockville, MD; the PDR's mailing 
address is USNRC PDR, Washington, DC 20555; telephone (301) 415-4737 or 
(800) 397-4209; fax 301-415-3548; e-mail [email protected]. Requests for 
single copies of draft or final regulatory guides (which may be 
reproduced) or for placement on an automatic distribution list for 
single copies of future draft guides in specific divisions should be 
made in writing to the U.S. Nuclear Regulatory Commission, Washington, 
DC 20555, Attention: Reproduction and Distribution Services Section, or 
by fax to 301-415-2289; e-mail [email protected]. Telephone requests 
cannot be accommodated. Regulatory guides are not copyrighted, and NRC 
approval is not required to reproduce them. (5 U.S.C. 552(a))

    Dated at Rockville, Maryland, this 25th day of February 2004.

    For the Nuclear Regulatory Commission.
Mabel Lee,
Director, Program Management, Project Development and Support, Office 
of Nuclear Regulatory Research.
[FR Doc. 04-4919 Filed 3-4-04; 8:45 am]
BILLING CODE 7590-01-P