[Federal Register Volume 68, Number 237 (Wednesday, December 10, 2003)]
[Notices]
[Pages 68862-68863]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 03-30626]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[A-475-820]


Stainless Steel Wire Rod From Italy; Final Results of Expedited 
Sunset Review of Antidumping Duty Order

AGENCY: Import Administration, International Trade Administration, 
Department of Commerce.

ACTION: Notice of final results of expedited sunset review of 
antidumping duty order on stainless steel wire rod from Italy.

-----------------------------------------------------------------------

SUMMARY: On August 1, 2003, the Department of Commerce (``the 
Department'') published the notice of initiation of a sunset review on 
stainless steel wire rod (``SSWR'') from Italy. On the basis of notice 
of intent to participate and adequate substantive comments filed on 
behalf of domestic interested parties and inadequate response (in this 
case, no response) from respondent interested parties, we determined to 
conduct an expedited (120-day) review. As a result of this review, we 
find that revocation of the antidumping duty order would be likely to 
lead to continuation or recurrence of dumping at the levels listed 
below in the section entitled ``Final Results of Review.''

EFFECTIVE DATE: December 10, 2003.

FOR FURTHER INFORMATION CONTACT: Ozlem Koray or Martha Douthit, Office 
of Policy for Import Administration, International Trade 
Administration, U.S. Department of Commerce, 14th Street and 
Constitution Avenue, NW., Washington, DC, 20230; telephone: (202) 482-
3675 or (202) 482-5050.

SUPPLEMENTARY INFORMATION:

Background

    On August 1, 2003, the Department published the notice of 
initiation of a sunset review of the antidumping order on SSWR from 
Italy pursuant to section 751(c) of the Tariff Act of 1930, as amended 
(the ``Act'').\1\ The Department received Notice of Intent to 
Participate on behalf of domestic interested party, Carpenter 
Technology Corporation (``Carpenter Technology''), within the deadline 
specified in section 351.218(d)(1)(I) of the Sunset Regulations. 
Carpenter Technology claimed interested party status under Section 
771(9)(C) of the Act, as U.S. producers of a domestic like product. We 
received a complete substantive response, in the sunset review, from 
the domestic interested parties, within the 30-day deadline specified 
in the Sunset Regulations under section 351.218(d)(3)(I). Carpenter 
Technology has been involved in this proceeding since its inception and 
are committed to full participation in this five-year review.
---------------------------------------------------------------------------

    \1\ Initiation of Five-Year (Sunset Reviews, 68 FR 45219 (August 
1, 2003).
---------------------------------------------------------------------------

    We did not receive a substantive response from any respondent 
interested parties to this proceeding. As a result, pursuant to section 
751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C) of the 
Department's Regulations, the Department conducted expedited, 120-day, 
review of this antidumping duty order.
    This review covers all imports from all manufacturers, producers, 
and exporters of SSWR from Italy except for Acciaierie Valbruna/
Accierie de Bolazano SpA, who received a de minimis rate in the 
investigation and as a result were excluded from the order.

Scope of Review

    SSWR comprises products that are hot-rolled or hot-rolled annealed 
and/or pickled and/or descaled rounds, squares, octagons, hexagons or 
other shapes, in coils, that may also be coated with a lubricant 
containing copper, lime or oxalate. SSWR is made of alloy steels 
containing, by weight, 1.2 percent or less of carbon and 10.5 percent 
or more of chromium, with or without other elements. These products are 
manufactured only by hot-rolling or hot-rolling, annealing, and/or 
pickling and/or descaling, are normally sold in coiled form, and are of 
solid cross-section. The majority of SSWR sold in the United States is 
round in cross-sectional shape, annealed and pickled, and later cold-
finished into stainless steel wire or small-diameter bar.The most 
common size for such products is 5.5 millimeters or 0.217 inches in 
diameter, which represents the smallest size that normally is produced 
on a rolling mill and is the size that most wire-drawing machines are 
set up to draw. The range of SSWR sizes normally sold in the United 
States is between 0.20 inches and 1.312 inches diameter. Two stainless 
steel grades, SF20T and K-M35FL, are excluded from the scope of this 
review. The chemical makeup for the excluded grades is as follows:

SF20T

    Carbon--0.05 max
    Manganese--2.00 max
    Phosphorous--0.05 max
    Sulfur--0.15 max
    Silicon--1.00 max
    Chromium--19.00/21.00
    Molybdenum--1.50/2.50
    Lead--added (0.10/0.30)
    Tellurium--added (0.03 min)

K-M35FL
    Carbon--0.015 max
    Silicon--0.70/1.00
    Manganese--0.40 max
    Phosphorous--0.04 max
    Sulfur--0.03 max
    Nickel--0.30 max
    Chromium--12.50/14.00
    Lead--0.10/0.30
    Aluminum--0.20/0.35

    The products subject to this order are currently classifiable under 
subheadings 7221.00.0005, 7221.00.0015, 7221.00.0030, 7221.00.0045, and 
7221.00.0075 of the Harmonized Tariff Schedule of the United States 
(``HTSUS''). Although the HTSUS subheadings are provided for 
convenience and customs purposes, the written description of the 
merchandise is dispositive.

Analysis of Comments Received

    All issues raised in this case by Carpenter Technology to this 
sunset review are addressed in the ``Issues and Decision Memorandum'' 
(``Decision Memo'') from Ronald K. Lorentzen, Acting Director, Office 
of Policy, Import Administration, to James J. Jochum, Assistant 
Secretary for Import Administration, dated December 1, 2003, which is 
hereby adopted by this notice. The issues discussed in the Decision 
Memo include the likelihood of continuation or recurrence of dumping 
and the magnitude of the margin likely to prevail were the order 
revoked. Parties can find a complete discussion of all issues raised in 
this review and the corresponding recommendations in this public 
memorandum, which is on file in room B-099 of the main Commerce 
Building.
    In addition, a complete version of the Decision Memo can be 
accessed directly on the Web at http://ia.ita.doc.gov/sunset, under the 
heading ``December 2003.'' The paper copy and electronic version of the 
Decision Memorandum are identical in content.

Final Results of Review

    We determine that revocation of the antidumping duty on SSWR from 
Italy would be likely to lead to continuation or recurrence of dumping 
at the following percentage weighted-average margins:

[[Page 68863]]



------------------------------------------------------------------------
                                                       Weighted average
           Manufacturer/producer/exporter              margin percentage
------------------------------------------------------------------------
Cogne Acciai Speciali S.r.l.........................               12.73
All Others..........................................               12.73
------------------------------------------------------------------------

    This notice also serves as the only reminder to parties subject to 
administrative protective orders (``APO'') of their responsibility 
concerning the return or destruction of proprietary information 
disclosed under APO in accordance with 19 CFR 351.305 of the 
Department's regulations. Timely notification of the return or 
destruction of APO materials or conversion to judicial protective order 
is hereby requested. Failure to comply with the regulations and terms 
of an APO is a violation which is subject to sanction.
    We are issuing and publishing this results and notice in accordance 
with sections 751(c), 752, and 777(i)(1) of the Act.

    Dated: December 1, 2003.
James J. Jochum,
Assistant Secretary, Import Administration.
[FR Doc. 03-30626 Filed 12-9-03; 8:45 am]
BILLING CODE 3510-DS-P