[Federal Register Volume 68, Number 175 (Wednesday, September 10, 2003)]
[Notices]
[Pages 53349-53351]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 03-23086]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration


Export Trade Certificate of Review

ACTION: Notice of application to amend Certificate.

-----------------------------------------------------------------------

SUMMARY: The Office of Export Trading Company Affairs (``OETCA''), 
International Trade Administration, Department of Commerce, has 
received an application to amend an Export Trade Certificate of Review 
(``Certificate''). This notice summarizes the proposed amendment and 
requests comments relevant to whether the Certificate should be issued.

FOR FURTHER INFORMATION CONTACT: Jeffrey Anspacher, Director, Office of 
Export Trading Company Affairs, International Trade Administration, 
(202) 482-5131, (this is not a toll free number) or by E-mail at 
[email protected].

SUPPLEMENTARY INFORMATION: Title III of the Export Trading Company Act 
of 1982 (15 U.S.C. 4001-21) authorizes the Secretary of Commerce to 
issue Export Trade Certificates of Review. An Export Trade Certificate 
of Review protects the holder and the members identified in the 
Certificate from state and federal government antitrust actions and 
from private treble damage antitrust actions for the export conduct 
specified in the Certificate and carried out in compliance with its 
terms and conditions. Section 302(b)(1) of the Export Trading Company 
Act of 1982 and 15 CFR 325.6 (a) require the Secretary to publish a 
notice in the Federal Register identifying the applicant and 
summarizing its proposed export conduct.

Request for Public Comments

    Interested parties may submit written comments relevant to the 
determination whether an amended Certificate should be issued. If the 
comments include any privileged or confidential business information, 
it must be clearly marked and a nonconfidential version of the comments 
(identified as such) should be included. Any comments not marked 
privileged or confidential business information will be deemed to be 
nonconfidential. An original and five copies, plus two copies of the 
nonconfidential version, should be submitted no later than 20 days 
after the date of this notice to: Office of Export Trading Company 
Affairs, International Trade Administration, Department of Commerce, 
Room 1104H, Washington DC 20230. Information submitted by any person is 
exempt from disclosure under the Freedom of Information Act (5 U.S.C. 
552). However, nonconfidential versions of the comments will be made 
available to the applicant if necessary for determining whether or not 
to issue the certificate. Comments should refer to this application as 
``Export Trade Certificate of Review, application number 84-17A04.''
    The Association for Manufacturing Technology's (``AMT'') original 
certificate was issued on May 19, 1987 (52 FR 19371, May 22, 1987) and 
lastly amended on March 1, 2002 (67 FR 12524 , March 19, 2002).
    A summary of the application for an amendment follows.

Summary of the Application

    Applicant: The Association for Manufacturing Technology (``AMT''), 
7901 Westpark Drive, McLean, Virginia 22102-4269.
    Contact: Ronald J. Baumgarten, Jr., Legal Counsel, Telephone: (202) 
662-5265.
    Application No.: 87-17A04.
    Date Deemed Submitted: August 26, 2003.
    Proposed Amendment: AMT seeks to amend its Certificate to: (1) Add 
the following companies as new ``Members'' of the Certificate within 
the meaning of Sec.  325.2(l) of the Regulations (15 CFR 325.2(l)):

A & A Manufacturing Company, Inc., New Berlin, WI;
Abbott Workholding Products, Manhattan, KS;
Action SuperAbrasive Products, Brimfield, OH;
Acu-Rite, Jamestown; NY;
Adept Technology Inc., Livermore, CA;
Agie Charmilles Group, Charlotte, NC;
Ahaus Tool and Engineering, Inc., Richmond, IN;
Airflow Systems, Inc., Dallas, TX;
Airtronics Gage & Machine Co., Elgin, IL;
Allen-Brady Co./Rockwell Automation, Milwaukee, WI;
Allied Machine & Engineering Corp., Dover, OH;
Aloris Tool Technology Co., Inc., Clifton, NJ;
AltaMAR Laser and Control, Fridley, MN;
Amada America Inc., Buena Park, CA;
Atlas Technologies Inc., Fenton, MI;
ATS Workholding, Inc., Anaheim, CA;
Automation Specialties, Inc., Howell, MI;
Automation Tool Company, Cookeville, TN;
Baublys Control Laser, Orlando, FL;
Beaumont Machine, Inc., Milford, OH;
Better Engineering, Mfg., Inc., Baltimore, MD;
Bock Workholding Inc., Mars, PA;
Bosch Rexroth-Electric Drives & Cntrls, Hoffman Estates, IL;
Brinkman International Group, Inc., Rochester, NY;
Buck Forkardt Inc., Portage, MI;
Carboloy Inc., Detroit, MI;
Cedarberg Industries, Inc., Eagan, MN;
Chick Workholding Solutions, Inc., Warrendale, PA;
Cincinnati Grinding Technologies, Middletown, OH;
CNC Engineering, Inc., Enfield, CT;
Coe Press Equipment Corp., Sterling Heights, MI;
Columbus McKinnon for the activities of its Positech Division, 
Laurens, IA;
Control Gaging, Inc., Ann Arbor, MI;
CRI, Centerless Rebuilders, Inc., Chesterfield Township, MI;
Curran Manu. Corp. for the activities of its Royal Products 
Division, Hauppauge, NY;
Cutting Edge Optronics, Inc., Saint Charles, MO;
Cyril Bath Company, Monroe, NC;
Daco Jaw Company, Milwaukee, WI;
Daewoo Heavy Industries, America Corp., West Caldwell, NJ;
Detroit Edge Tool Company, Detroit, MI;
DiManco, Inc.;
Dorian Tool International, East Bernard, TX;
Doringer Cold Saws, Inc., Gardena, CA;
DP Technology Corp./ESPRIT, Camarillo, CA;
DS Technology (USA) Inc., Cincinnati, OH;
Eagle Machine Tools, Inc., Fort Lauderdale, FL;
Eimeldingen Corporation, Indianapolis, IN;
Eitel Presses, Inc., Orwigsburg, PA;
EMAG L.L.C., Farmington Hills, MI;
Enerpac., Milwaukee, WI;
Engis Corporation, Wheeling, IL;
Eriez Magnetics, Erie, PA;
ExxonMobil Lubricants & Petrol Spec Co., Fairfax, VA;
Fagor Automation Corporation, Elk Grove Village, IL;
FANUC Robotics America, Inc., Rochester Hills, MI;
Fred V. Fowler Co., Inc., Newton, MA;
GE Fanuc Automation Americas, Inc., Charlottesville, VA;
Gibbs & Associates, Moorpark, CA;
Giddings & Lewis LLC, Fond Du Lac, WI;
Russell T. Gillman, Inc.--An SKF Co., Grafton, WI;
Gleason Corporation, Rochester, NY;
Govro-Nelson Company, St. Clair, MI;
Gudel Lineartec, Inc., Ann Arbor, MI;
Guhring, Inc., Brookfield, WI;
Hangsterfer's Laboratories, Inc., Mantua, NJ;
Hansford Parts And Products, Macedon, NY;

[[Page 53350]]

Heller Machine Tools, Troy, MI;
Helmel Engineering Products, Inc., Niagara Falls, NY;
Hines Industries, Inc., Ann Arbor, MI;
Hoffmann Filter Corporation, Brighton, MI;
Huron Machine Products, Inc., Fort Lauderdale, FL;
INA USA, Corp., Fort Mill, SC;
Inductoheat, Inc., Madison Heights, MI;
Ingersoll Cutting Tool Company, Rockford, IL;
Ingersoll Production Systems, Rockford, IL;
Innovative Products & Equip., Inc., Lowell, MA;
Intelitek, Manchester, NH;
Jensen Fabricating Engineers, Inc., Berlin, CT;
Jet Edge, Saint Michael, MN;
Kalamazoo Machine Tool, Portage, MI;
KAPP Technologies, Boulder, CO;
Kennametal Inc.--World Headquarters, Latrobe, PA;
Komet of America, Inc., Schaumburg, IL;
Koolant Koolers, Inc., Kalamazoo, MI;
KPT/Kaiser Precision Tooling, Inc., Elk Grove Village, IL;
Lexair/Production Dynamics, Lexington, KY;
Littell, Addison, IL;
LNS America, Inc., Cincinnati, OH;
Logansport Matsumoto Co., Inc., Logansport, IN;
Lovejoy Tool Company, Inc., Springfield, VT;
Mahr Federal Inc., Providence, RI;
Maintenance Service Corp., Milwaukee, WI;
Mass Finishing, Inc., Delano, MN;
Mastercam/CNC Software, Inc., Tolland, CT;
Master Chemical Corporation, Perrysburg, OH;
Master Work-Holding, Inc., Morganton, NC;
Mate Precision Tooling, Anoka, MN;
MDSI, Ann Arbor, MI;
Mestek Inc.;
Michigan Custom Machines, Farmington Hills, MI;
Micro Centric Corporation, Plainview, NY;
MIDACO Corp., Elk Grove Village, IL;
M&M Precision Systems Corporation, West Carrollton, OH;
Monsanto Enviro-Chem Systems, Inc., Chesterfield, MO;
Nook Industries, Inc., Cleveland, OH;
Northfield Precision Instrument Corp., Island Park, NY;
NorthTech Workholding, Inc., Schaumburg, IL;
Norwalk Innovation, Inc., Shelton, CT;
Novellus Systems, Inc., Chandler, AZ;
Novi Precision Products, Inc., Brighton, MI;
NSK Precision America Inc., Bloomingdale, IL;
Nuvonyx Inc., Bridgeton, MO;
Penn United Technology, Inc., Saxonburg, PA;
Phillips Corporation, Columbia, MD;
PIA Group, Cincinnati, OH;
Pines Manufacturing, Westlake, OH;
Polymer Sealing Solutions for the activities of its Seals Division, 
Fort Wayne, IN;
Positrol, Inc., Cincinnati, OH;
PowerHold Incorporated, Middlefield, CT;
P R C Laser, Landing, NJ;
Precision Industries Corporation, Elkhart, IN;
Preco Laser Systems, LLC, Somerset, WI;
Premier Tooling Systems, Grand Blanc, MI;
Pressure Island, Davidson, NC;
PRIMA North America, Inc., Chicopee, MA;
QPAC-Quality Products & Concepts, Lansing, MI;
Quality Vision International Inc., Rochester, NY;
Quantronix Corporation, East Setauket, NY;
Ranshoff, Inc., Cincinnati, OH;
Raycon Corporation, Ann Arbor, MI;
Royal Machine & Tool Corporation, Berlin, CT;
Saint-Gobain Abrasives, Inc., Worcester, MA;
W.J. Savage Co. for the activities of its Savage Saws Division, 
Knoxville, TN;
Schunk, Inc., Morrisville, NC;
Scientific Technologies, Inc., Fremont, CA;
Sescoi USA, Inc., Southfield, MI;
SGS Tool Company, Munroe Falls, OH;
Siemens Energy & Automation, Inc., Elk Grove Village, IL;
SMW Systems, Inc., Santa Fe Springs, CA;
Sortimat Technology L.P., Schaumburg, IL;
Southwestern Industries, Inc., Rancho Dominguez, CA;
SSD Control Technology, Inc., South Bend, IN;
The L.S. Starrett Co., Athol, MA;
The Precise Corporation, Racine, WI;
Tyler Machinery Co., Inc., for the activities of its MBD Machines 
Div., Warsaw, IN;
Stellram, La Vergne, TN;
S-T Industries, Inc., St. James, MN;
Suburban Tool, Inc., Auburn Hills, MI;
Suhner Manufacturing Inc., Rome, GA;
Systems Engineering Company Inc., Milwaukee, WI;
T2K--Tooling 2000, Redmond, WA;
Telesis Technologies, Inc., Circleville, OH;
The Timken Company, Torrington, CT;
Thomson Industries, Inc., Port Washington, NY;
Tri-Cam, Inc., Rockford, IL;
Tri-Turn Technologies, Inc., Euclid, OH;
Troyke Manufacturing Co., Cincinnati, OH;
TRU TECH Systems, Inc., Mount Clemens, MI;
Ultra-Grip International, Inc., Walled Lake, MI;
Unist, Inc., Grand Rapids, MI;
Vektek, Inc., Elwood, KS;
Vermont Machine Tool Corp., Springfield, VT;
Vibro/Dynamics Corporation, Broadview, IL;
VX Corporation, Palm Bay, FL;
O. S. Walker Company, Worcester, MA;
Walter Waukesha, Inc., Waukesha, WI

    (2) Delete the following companies as ``Members'' of the 
Certificate:

Alliance Automation Systems
ATS Carolina
ATS Michigan
ATS Ohio
ATS Oregon
ATS Southwest
BHS-Torin Inc.
Blue Valley Machine and Manufacturing Co.
Bridgeport Machines, Inc.
Cargill Detroit Corp.
Cone-Blanchard Machine Co.
Centro-Metalcut Inc.
Dustvent Inc.
Dynetics Corporation
Eagle Eaton Leonard Inc.
Edgetek Machine Corp.
Evana Automation Inc.
E.W. Bliss Company
Gallmeyer & Livingston Company
Goss & De Leeuw Machine Company, The
Grav-I-Flo Corp.
Griffin Automation
Hansvedt EDM Division
Hegenscheidt Corporation
Heim Corp.
Herman Williams Company, Inc.
Hertlein Special Tool Co., Inc.
Hitachi Seiki USA
HR Krueger Machine Tool Inc.
Hybco Products, Inc.
Hyd-Mech Inc.
Komatus Cutting Technologies
Manufacturing Technology, Inc. (California)
Masco Machine, Inc.
Morey Machinery Design & Manufacturing (used to be Morey Machinery 
Mfg. Corp.)
Motch Corporation
Onsrud Machine Corp.
P S Group
R & B Machine Tool Co.
Redin Corporation
Robert Bosch Corporation for the activities of its Surf/Tran 
Division
South Bend Lathe Corp.
Taurus Products, Inc.
TCE Corporation
The National Acme Company
Wesel Manufacturing Co.
Wisconsin Machine Tool Corp.
Xermac, Inc.

    (3) Change the listings of the existing members as follows:

``ABB Flexible Automation Systems, Inc.'' to ``ABB Inc.-Mfg & 
Consumer Industries Grp''; Advanced Assembly Automation, Inc.'' to 
``DT Industries''; ``The Beckwood Corporation'' to ``Beckwood Press 
Company''; ``The Bodine Corporation'' to ``Bodine Assembly and Test 
Systems''; ``Broaching Machine Specialties'' to ``Broaching Machine 
Specialties Co.''; ``Brown & Sharpe Manufacturing Co.'' to ``Brown & 
Sharpe, Inc.''; ``Capco, Inc.'' to ``Capco Machinery Systems, 
Inc.''; ``Chas. G Allen Co.'' to ``Chas. G Allen Co., Inc.''; ``The 
Cincinnati Gilbert Mach. Tool Co. L.L.C.'' to ``The Cincinnati 
Gilbert Mach. Tool Co.''; ``Crankshaft Machine Group'' to ``CMG''; 
``Dake'' to ``Dake--JSJ Corporation;'' ``Denford Machine Tooks, USA, 
Inc.'' to ``Denford Inc.''; ``DT Industries, Inc.'' to ``DT 
Industries''; ``ESAB L-TEC Cutting Systems'' to ``ESAB Cutting 
Systems''; ``Fayscott Co.'' to ``Fayscott LLC''; ``The Gem City 
Engineering Co.'' to ``GCE Technologies''; ``Hess Engineering, 
Inc.'' to ``Hess Industries, Inc.''; ``Industrial Metal Products 
Corp.'' to ``IMPCO Machine Tools''; ``Kingsbury Machine Tool 
Corporation'' to ``Kingsbury Corporation''; ``Kleer-Flo Company'' to 
``KLEENTEC/KLEERFLO''; ``Lapmaster International'' to ``Lapmaster 
International--US''; ``Livernois Engineering'' to ``Outokumpu 
Livernois Engineering LLC''; ``Milacron, Inc.'' to ``Milicron, 
Inc.--Headquarters''; ``Miyano Machinery USA Inc.'' to ``Miyano 
Machinery Inc.''; ``Moline Tool Company, Inc.'' to ``Moline Tool''; 
``Murata Wiedemann, Inc.'' to ``Murata Machinery USA, Inc.-Machine 
Tools''; ``National Broach & Machine Co.'' to ``Nachi Machining 
Technology Company'';

[[Page 53351]]

``Newcor, Inc.'' to ``Newcor Bay City''; ``New Nine Inc., d/b/a GWI 
Engineering'' to ``GWI Engineering, Inc.''; ``Okuma, Inc.'' to 
``Okuma America Corporation (OAC)''; ``RMT Technologies'' to ``RMT 
Technology''; ``Seneca Falls Technology Group'' to ``Seneca Falls 
Tech Grp-Machine Blders Division''; ``SMS Group Inc.'' to ``Saginaw 
Machine Systems''; ``Strippit, Inc.'' to ``Strippit/LVD''; ``UNOVA 
Inc.'' to ``UNOVA Industrial Automation Systems''; Wilton 
Machinery'' to ``WMH Tool Group''.


    Dated: September 5, 2003.
Jeffrey Anspacher,
Director, Office of Export Trading Company Affairs.
[FR Doc. 03-23086 Filed 9-9-03; 8:45 am]
BILLING CODE 3510-DR-P