[Federal Register Volume 68, Number 27 (Monday, February 10, 2003)]
[Notices]
[Pages 6719-6722]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 03-3288]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[A-475-824]


Stainless Steel Sheet and Strip in Coils From Italy: Final 
Results of Antidumping Administrative Review

AGENCY: Import Administration, International Trade Administration, U.S. 
Department of Commerce.

ACTION: Notice of final results in the antidumping duty administrative 
review of stainless steel sheet and strip in coils from Italy

-----------------------------------------------------------------------

SUMMARY: On August 7, 2002, the U.S. Department of Commerce 
(``Department'') published in the Federal Register the preliminary 
results of its administrative review of the antidumping duty order on 
stainless steel sheet and strip in coils (``SSSS'') from Italy. See 
Preliminary Results of Antidumping Duty Administrative Review: 
Stainless Steel Sheet and Strip in Coils from Italy, 67 FR 51224 
(August 7, 2002) (``Preliminary Results''). This review covers imports 
of subject merchandise from ThyssenKrupp Acciai Speciali Terni S.p.A 
(``TKAST'') and ThyssenKrupp AST USA, Inc.(``TKASTUSA''). The period of 
review (``POR'') is July 1, 2000 through June 30, 2001.
    Based on our analysis of the comments received, we have made 
changes from our results from the preliminary results of review. 
Therefore, the final results differ from the preliminary results. The 
final weighted-average dumping margin for the reviewed firm is listed 
below in the section entitled ``Final Results of the Review.''

EFFECTIVE DATE: February 10, 2003.

FOR FURTHER INFORMATION CONTACT: Stephen Bailey or Robert Bolling,

[[Page 6720]]

Enforcement Group III, Import Administration, International Trade 
Administration, U.S. Department of Commerce, 1401 Constitution Avenue, 
NW., Washington, DC 20230; telephone: 202-482-1102, or 202-482-3434, 
respectively.

SUPPLEMENTARY INFORMATION:

Background

    On August 7, 2002, the Department published in the Federal Register 
the preliminary results of its administrative review of the antidumping 
duty order on stainless steel sheet and strip in coils from Italy. See 
Preliminary Results. We invited parties to comment on our preliminary 
results of review.\1\ We received written comments on September 6, 
2002, from petitioners and respondents. On September 16, 2002, we 
received rebuttal comments from petitioners and respondents. On January 
10, 2003, the Department issued a letter to interested parties 
requesting comments regarding whether certain selling agents of Ken-Mac 
Metals (``Ken-Mac'') were employees of Ken-Mac. On January 15, 2003, 
petitioners filed comments.
---------------------------------------------------------------------------

    \1\ Petitioners in this case are Allegheny Ludlum Corporation, 
AK Steel Corporation, J&L Specialty Steel, Inc., North American 
Stainless, United Steelworkers of America, AFL-CIO/CLC, Butler Armco 
Independent Union and Zanesville Armco Independent Organization, 
Inc.
---------------------------------------------------------------------------

    Under section 751(a)(3)(A) of the Act, the Department may extend 
the deadline for completion of an administrative review if it 
determines that it is not practicable to complete the review within the 
statutory time limit. Accordingly, the Department extended the due date 
for the notice of final results 40 days, from the original due date of 
December 5, 2002, to January 14, 2003. See Stainless Steel Sheet and 
Strip in Coils from Italy: Extension of Time Limit of Final Results of 
Antidumping Duty Administrative Review, 67 FR 75846 (December 10, 
2002). In accordance with section 751(a)(3)(A) of the Act, the 
Department again extended the due date for the notice of final results 
an additional 20 days, from the revised due date of January 14, 2003 to 
February 3, 2003. See Stainless Steel Sheet and Strip in Coils from 
Italy: Extension of Final Results of Antidumping Duty Administrative 
Review, 68 FR 2316 (January 16, 2002). We have now completed the 
administrative review in accordance with section 751(a) of the Tariff 
Act of 1930, as amended (``the Act'').

Scope of Review

    For purposes of this administrative review, the products covered 
are certain stainless steel sheet and strip in coils. Stainless steel 
is an alloy steel containing, by weight, 1.2 percent or less of carbon 
and 10.5 percent or more of chromium, with or without other elements. 
The subject sheet and strip is a flat-rolled product in coils that is 
greater than 9.5 mm in width and less than 4.75 mm in thickness, and 
that is annealed or otherwise heat treated and pickled or otherwise 
descaled. The subject sheet and strip may also be further processed 
(e.g., cold-rolled, polished, aluminized, coated, etc.) provided that 
it maintains the specific dimensions of sheet and strip following such 
processing.
    The merchandise subject to this review is currently classifiable in 
the Harmonized Tariff Schedule of the United States (``HTS'') at 
subheadings: 7219.13.0031, 7219.13.0051, 7219.13.0071, 7219.1300.81,\2\ 
7219.14.0030, 7219.14.0065, 7219.14.0090, 7219.32.0005, 7219.32.0020, 
7219.32.0025, 7219.32.0035, 7219.32.0036, 7219.32.0038, 7219.32.0042, 
7219.32.0044, 7219.33.0005, 7219.33.0020, 7219.33.0025, 7219.33.0035, 
7219.33.0036, 7219.33.0038, 7219.33.0042, 7219.33.0044, 7219.34.0005, 
7219.34.0020, 7219.34.0025, 7219.34.0030, 7219.34.0035, 7219.35.0005, 
7219.35.0015, 7219.35.0030, 7219.35.0035, 7219.90.0010, 7219.90.0020, 
7219.90.0025, 7219.90.0060, 7219.90.0080, 7220.12.1000, 7220.12.5000, 
7220.20.1010, 7220.20.1015, 7220.20.1060, 7220.20.1080, 7220.20.6005, 
7220.20.6010, 7220.20.6015, 7220.20.6060, 7220.20.6080, 7220.20.7005, 
7220.20.7010, 7220.20.7015, 7220.20.7060, 7220.20.7080, 7220.20.8000, 
7220.20.9030, 7220.20.9060, 7220.90.0010, 7220.90.0015, 7220.90.0060, 
and 7220.90.0080. Although the HTS subheadings are provided for 
convenience and Customs purposes, the Department's written description 
of the merchandise under review is dispositive.
---------------------------------------------------------------------------

    \2\ Due to changes to the HTS numbers in 2001, 7219.13.0030, 
7219.13.0050, 7219.13.0070, and 7219.13.0080 are now 7219.13.0031, 
7219.13.0051, 7219.13.0071, and 7219.13.0081, respectively.
---------------------------------------------------------------------------

    Excluded from the scope of this review are the following: (1) Sheet 
and strip that is not annealed or otherwise heat treated and pickled or 
otherwise descaled, (2) sheet and strip that is cut to length, (3) 
plate (i.e., flat-rolled stainless steel products of a thickness of 
4.75 mm or more), (4) flat wire (i.e., cold-rolled sections, with a 
prepared edge, rectangular in shape, of a width of not more than 9.5 
mm), and (5) razor blade steel. Razor blade steel is a flat-rolled 
product of stainless steel, not further worked than cold-rolled (cold-
reduced), in coils, of a width of not more than 23 mm and a thickness 
of 0.266 mm or less, containing, by weight, 12.5 to 14.5 percent 
chromium, and certified at the time of entry to be used in the 
manufacture of razor blades. See Chapter 72 of the HTS, ``Additional 
U.S. Note'' 1(d).
    Flapper valve steel is also excluded from the scope of this review. 
This product is defined as stainless steel strip in coils containing, 
by weight, between 0.37 and 0.43 percent carbon, between 1.15 and 1.35 
percent molybdenum, and between 0.20 and 0.80 percent manganese. This 
steel also contains, by weight, phosphorus of 0.025 percent or less, 
silicon of between 0.20 and 0.50 percent, and sulfur of 0.020 percent 
or less. The product is manufactured by means of vacuum arc remelting, 
with inclusion controls for sulphide of no more than 0.04 percent and 
for oxide of no more than 0.05 percent. Flapper valve steel has a 
tensile strength of between 210 and 300 ksi, yield strength of between 
170 and 270 ksi, plus or minus 8 ksi, and a hardness (Hv) of between 
460 and 590. Flapper valve steel is most commonly used to produce 
specialty flapper valves in compressors.
    Also excluded is a product referred to as suspension foil, a 
specialty steel product used in the manufacture of suspension 
assemblies for computer disk drives. Suspension foil is described as 
302/304 grade or 202 grade stainless steel of a thickness between 14 
and 127 microns, with a thickness tolerance of plus-or-minus 2.01 
microns, and surface glossiness of 200 to 700 percent Gs. Suspension 
foil must be supplied in coil widths of not more than 407 mm, and with 
a mass of 225 kg or less. Roll marks may only be visible on one side, 
with no scratches of measurable depth. The material must exhibit 
residual stresses of 2 mm maximum deflection, and flatness of 1.6 mm 
over 685 mm length.
    Certain stainless steel foil for automotive catalytic converters is 
also excluded from the scope of this review. This stainless steel strip 
in coils is a specialty foil with a thickness of between 20 and 110 
microns used to produce a metallic substrate with a honeycomb structure 
for use in automotive catalytic converters. The steel contains, by 
weight, carbon of no more than 0.030 percent, silicon of no

[[Page 6721]]

more than 1.0 percent, manganese of no more than 1.0 percent, chromium 
of between 19 and 22 percent, aluminum of no less than 5.0 percent, 
phosphorus of no more than 0.045 percent, sulfur of no more than 0.03 
percent, lanthanum of less than 0.002 or greater than 0.05 percent, and 
total rare earth elements of more than 0.06 percent, with the balance 
iron.
    Permanent magnet iron-chromium-cobalt alloy stainless strip is also 
excluded from the scope of this order. This ductile stainless steel 
strip contains, by weight, 26 to 30 percent chromium, and 7 to 10 
percent cobalt, with the remainder of iron, in widths 228.6 mm or less, 
and a thickness between 0.127 and 1.270 mm. It exhibits magnetic 
remanence between 9,000 and 12,000 gauss, and a coercivity of between 
50 and 300 oersteds. This product is most commonly used in electronic 
sensors and is currently available under proprietary trade names such 
as ``Arnokrome III.''\3\
---------------------------------------------------------------------------

    \3\ ``Arnokrome III'' is a trademark of the Arnold Engineering 
Company.
---------------------------------------------------------------------------

    Certain electrical resistance alloy steel is also excluded from the 
scope of this review. This product is defined as a non-magnetic 
stainless steel manufactured to American Society of Testing and 
Materials (``ASTM'') specification B344 and containing, by weight, 36 
percent nickel, 18 percent chromium, and 46 percent iron, and is most 
notable for its resistance to high temperature corrosion. It has a 
melting point of 1390 degrees Celsius and displays a creep rupture 
limit of 4 kilograms per square millimeter at 1000 degrees Celsius. 
This steel is most commonly used in the production of heating ribbons 
for circuit breakers and industrial furnaces, and in rheostats for 
railway locomotives. The product is currently available under 
proprietary trade names such as ``Gilphy 36.'' \4\
---------------------------------------------------------------------------

    \4\ ``Gilphy 36'' is a trademark of Imphy, S.A.
---------------------------------------------------------------------------

    Certain martensitic precipitation-hardenable stainless steel is 
also excluded from the scope of this order. This high-strength, ductile 
stainless steel product is designated under the Unified Numbering 
System (``UNS'') as S45500-grade steel, and contains, by weight, 11 to 
13 percent chromium, and 7 to 10 percent nickel. Carbon, manganese, 
silicon and molybdenum each comprise, by weight, 0.05 percent or less, 
with phosphorus and sulfur each comprising, by weight, 0.03 percent or 
less. This steel has copper, niobium, and titanium added to achieve 
aging, and will exhibit yield strengths as high as 1700 Mpa and 
ultimate tensile strengths as high as 1750 Mpa after aging, with 
elongation percentages of 3 percent or less in 50 mm. It is generally 
provided in thicknesses between 0.635 and 0.787 mm, and in widths of 
25.4 mm. This product is most commonly used in the manufacture of 
television tubes and is currently available under proprietary trade 
names such as ``Durphynox 17.'' \5\
---------------------------------------------------------------------------

    \5\ ``Durphynox 17'' is a trademark of Imphy, S.A.
---------------------------------------------------------------------------

    Also excluded are three specialty stainless steels typically used 
in certain industrial blades and surgical and medical instruments. 
These include stainless steel strip in coils used in the production of 
textile cutting tools (e.g., carpet knives).\6\ This steel is similar 
to AISI grade 420 but containing, by weight, 0.5 to 0.7 percent of 
molybdenum. The steel also contains, by weight, carbon of between 1.0 
and 1.1 percent, sulfur of 0.020 percent or less, and includes between 
0.20 and 0.30 percent copper and between 0.20 and 0.50 percent cobalt. 
This steel is sold under proprietary names such as ``GIN4 Mo.''\7\ The 
second excluded stainless steel strip in coils is similar to AISI 420-
J2 and contains, by weight, carbon of between 0.62 and 0.70 percent, 
silicon of between 0.20 and 0.50 percent, manganese of between 0.45 and 
0.80 percent, phosphorus of no more than 0.025 percent and sulfur of no 
more than 0.020 percent. This steel has a carbide density on average of 
100 carbide particles per 100 square microns. An example of this 
product is ``GIN5'' \8\ steel. The third specialty steel has a chemical 
composition similar to AISI 420 F, with carbon of between 0.37 and 0.43 
percent, molybdenum of between 1.15 and 1.35 percent, but lower 
manganese of between 0.20 and 0.80 percent, phosphorus of no more than 
0.025 percent, silicon of between 0.20 and 0.50 percent, and sulfur of 
no more than 0.020 percent. This product is supplied with a hardness of 
more than Hv 500 guaranteed after customer processing, and is supplied 
as, for example, ``GIN6.'' \9\
---------------------------------------------------------------------------

    \6\ This list of uses is illustrative and provided for 
descriptive purposes only.
    \7\ ``GIN4 Mo'' is the proprietary grade of Hitachi Metals 
America, Ltd.
    \8\ ``GIN5'' is the proprietary grade of Hitachi Metals America, 
Ltd.
    \9\ ``GIN6'' is the proprietary grade of Hitachi Metals America, 
Ltd.
---------------------------------------------------------------------------

Analysis of Comments Received

    All issues raised in the case and rebuttal briefs by parties to 
this administrative review are addressed in the ``Issues and Decision 
Memorandum'' (``Decision Memorandum'') from Joseph A. Spetrini, Deputy 
Assistant Secretary, Import Administration, to Faryar Shirzad, 
Assistant Secretary for Import Administration, dated February 3, 2003, 
which is hereby adopted by this notice. A list of the issues which 
parties have raised and to which we have responded, are in the Decision 
Memorandum, which is attached to this notice as an Appendix. Parties 
can find a complete discussion of all issues raised in this review and 
the corresponding recommendations in the Decision Memorandum which is 
on file in the Central Records Unit, Room B-099 of the main Department 
building. In addition, a complete version of the Decision Memorandum 
can be accessed directly on the Web at http://ia.ita.doc.gov/frn/index.html. The paper copy and electronic version of the Decision 
Memorandum are identical in content.

Sales Below Cost

    We disregarded sales below cost for TKAST during the course of the 
review.

Changes Since the Preliminary Results

    Based on our analysis of comments received, we have made changes in 
the margin calculations for TKAST. The changes to the margin 
calculations are listed below:
    1. The Department disallowed TKAST's insurance revenue allocation 
claim for certain sales which were ultimately returned to TKAST. 
However, the Department made a sales-specific insurance revenue 
adjustment for certain sales because the information necessary for 
calculating this adjustment was submitted on the record of this 
administrative review. See Comment 1.
    2. The Department is adding home market interest revenue to the 
home market gross unit price in accordance with section 773(a)(6)(C) of 
the Act. See Comment 2.
    3. The Department made certain changes based on TKAST's reported 
U.S. commissions. See Commissions Memorandum from Stephen Bailey to 
Edward C. Yang dated February 3, 2003.
    4. The Department is adjusting U.S. price to account for the 
incurred cost of skids and additional U.S. freight. See Comment 7.
    5. The Department made certain changes to TKAST's interest 
expenses. See Comment 5.
    6. The Department is adjusting CEP profit to account for an 
affiliate's further manufacturing in the U.S. See Comment 9.

Final Results of Review

    We determine that the following percentage margin exists for the 
period July 1, 2000, through June 30, 2001:

[[Page 6722]]



------------------------------------------------------------------------
   Producer/manufacturer/exporter           Weighted-average margin
------------------------------------------------------------------------
TKAST                                 5.84%
------------------------------------------------------------------------

    The Department shall determine, and Customs shall assess, 
antidumping duties on all appropriate entries. In accordance with 19 
CFR 351.212(b)(1), we have calculated exporter/importer (or customer)-
specific assessment rate for merchandise subject to this review. The 
Department will issue appraisement instructions directly to the Customs 
Service within 15 days of publication of these final results of review. 
We will direct the Customs Service to assess the resulting assessment 
rates against the entered customs values for the subject merchandise on 
each of that importer's entries during the review period. For 
customer's duty-assessment purposes, we will calculate importer-
specific assessment rates by dividing the dumping margins calculated 
for each importer by the total entered value of sales for each importer 
during the period of review.

Cash Deposit Requirements

    The following deposit requirements will be effective upon 
publication of this notice of final results of administrative review 
for all shipments of stainless steel sheet and strip in coils from 
Italy entered, or withdrawn from warehouse, for consumption on or after 
the date of publication, as provided by section 751(a)(1) of the Act: 
(1) The cash deposit rate for TKAST will be the rate shown above; (2) 
for previously reviewed or investigated companies not listed above, the 
cash deposit rate will continue to be the company-specific rate 
published for the most recent period; (3) if the exporter is not a firm 
covered in this review, a prior review, or the original less-than-fair-
value (LTFV) investigation, but the manufacturer is, the cash deposit 
rate will be the rate established for the most recent period for the 
manufacturer of the merchandise; and (4) if neither the exporter nor 
the manufacturer is a firm covered in these or any previous reviews 
conducted by the Department, the cash deposit rate will be the ``all 
others'' rate, which is 11.23 percent.
    These deposit requirements shall remain in effect until publication 
of the final results of the next administrative review.

Notification of Interested Parties

    This notice also serves as a final reminder to importers of their 
responsibility under 19 CFR 351.402(f)(2) to file a certificate 
regarding the reimbursement of antidumping duties prior to liquidation 
of the relevant entries during this review period. Failure to comply 
with this requirement could result in the Secretary's presumption that 
reimbursement of the antidumping duties or countervailing duties 
occurred and the subsequent assessment of double antidumping duties or 
countervailing duties.
    This notice also serves as a reminder to parties subject to 
administrative protective orders (``APOs'') of their responsibility 
concerning the return or destruction of proprietary information 
disclosed under APO in accordance with 19 CFR 351.305, which continues 
to govern business proprietary information in this segment of the 
proceeding. Timely written notification of the return/destruction of 
APO materials or conversion to judicial protective order is hereby 
requested. Failure to comply with the regulations and terms of an APO 
is a violation which is subject to sanction.
    We are issuing and publishing this determination and notice in 
accordance with sections 751(a)(1) and 771(i) (1) of the Act.

    Dated: February 3, 2003.
Faryar Shirzad,
Assistant Secretary for Import Administration.

Appendix--Issues in the Decision Memorandum

1. U.S. Insurance Revenue
2. H.M. Interest Revenue
3. U.S. Commissions
4. Home Market Imputed Credit
5. Cost of Production Adjustments
6. Treatment of Negative Margins
7. Skid and Freight Revenue Adjustments
8. Re-packing Expenses
9. Further Manufacturing

[FR Doc. 03-3288 Filed 2-7-03; 8:45 am]
BILLING CODE 3510-DS-P