[Federal Register Volume 67, Number 241 (Monday, December 16, 2002)]
[Notices]
[Pages 77060-77064]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 02-31588]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[OPPT-2002-0072; FRL-7284-9]


Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires 
any person who intends to manufacture (defined by statute to include 
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to 
notify EPA and comply with the statutory provisions pertaining to the 
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of 
TSCA, EPA is required to publish a notice of receipt of a 
premanufacture notice (PMN) or an application for a test marketing 
exemption (TME), and to publish periodic status reports on the 
chemicals under review and the receipt of notices of commencement to 
manufacture those chemicals. This status report, which covers the 
period from November 2, 2002 to November 19, 2002, consists of the PMNs 
pending or expired, and the notices of commencement to manufacture a 
new chemical that the Agency has received under TSCA section 5 during 
this time period.

DATES: Comments identified by the docket ID number OPPT- 2002-0072 and 
the specific PMN number or TME number, must be received on or before 
January 15, 2003.

ADDRESSES: Comments may be submitted electronically, by mail, or 
through hand delivery/courier. Follow the detailed instructions as 
provided in Unit I. of the SUPPLEMENTARY INFORMATION.

FOR FURTHER INFORMATION CONTACT: Barbara Cunningham, Acting Director, 
Environmental Assistance Division, Office of Pollution Prevention and 
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania 
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; 
e-mail address: [email protected].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

    This action is directed to the public in general. As such, the 
Agency has not attempted to describe the specific entities that this 
action may apply to. Although others may be affected, this action 
applies directly to the submitter of the premanufacture notices 
addressed in the action. If you have any questions regarding the 
applicability of this action to a particular entity, consult the person 
listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Copies of This Document and Other Related Information?

    1. Docket. EPA has established an official public docket for this 
action under docket identification (ID) number OPPT-2002-0072. The 
official public docket consists of the documents specifically 
referenced in this action, any public comments received, and other 
information related to this action. Although a part of the official 
docket, the public docket does not include Confidential Business 
Information (CBI) or other information whose disclosure is restricted 
by statute. The official public docket is the collection of materials 
that is available for public viewing at the EPA Docket Center, Rm. 
B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, 
DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday 
through Friday, excluding legal holidays. The EPA Docket Center Reading 
Room telephone number is (202) 566-1744 and the telephone number for 
the OPPT Docket, which is located in EPA Docket Center, is (202) 566-
0280.
    2. Electronic access. You may access this Federal Register document 
electronically through the EPA Internet under the ``Federal Register'' 
listings at http://www.epa.gov/fedrgstr/.
    An electronic version of the public docket is available through 
EPA's electronic public docket and comment system, EPA Dockets. You may 
use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public 
comments, access the index listing of the contents of the official 
public docket, and to access those documents in the public docket that 
are available electronically. Although not all docket materials may be 
available electronically, you may still access any of the publicly 
available docket materials through the docket facility identified in 
Unit I.B.1. Once in the system, select ``search,'' then key in the 
appropriate docket ID number.
    Certain types of information will not be placed in the EPA Dockets. 
Information claimed as CBI and other information whose disclosure is 
restricted by statute, which is not included in the official public 
docket, will not be available for public viewing in EPA's electronic 
public docket. EPA's policy is that copyrighted material will not be 
placed in EPA's electronic public docket but will be available only in 
printed, paper form in the official public docket. To the extent 
feasible, publicly available docket materials will be made available in 
EPA's electronic public docket. When a document is selected from the 
index list in EPA Dockets, the system will identify whether the 
document is available for viewing in EPA's electronic public docket. 
Although not all docket materials may be available electronically, you 
may still access any of the publicly available docket materials through 
the docket facility identified in Unit I.B.1. EPA intends to work 
towards providing electronic access to all of the publicly available 
docket materials through EPA's electronic public docket.
    For public commenters, it is important to note that EPA's policy is 
that public comments, whether submitted electronically or in paper, 
will be made available for public viewing in EPA's electronic public 
docket as EPA receives them and without change, unless the comment 
contains copyrighted material, CBI, or other information whose 
disclosure is restricted by statute. When EPA identifies a comment 
containing copyrighted material, EPA will provide a reference to that 
material in the version of the comment that is placed in EPA's 
electronic public docket. The entire printed comment, including the

[[Page 77061]]

copyrighted material, will be available in the public docket.
    Public comments submitted on computer disks that are mailed or 
delivered to the docket will be transferred to EPA's electronic public 
docket. Public comments that are mailed or delivered to the docket will 
be scanned and placed in EPA's electronic public docket. Where 
practical, physical objects will be photographed, and the photograph 
will be placed in EPA's electronic public docket along with a brief 
description written by the docket staff.

C. How and To Whom Do I Submit Comments?

    You may submit comments electronically, by mail, or through hand 
delivery/courier. To ensure proper receipt by EPA, identify the 
appropriate docket ID number and specific PMN number or TME number in 
the subject line on the first page of your comment. Please ensure that 
your comments are submitted within the specified comment period. 
Comments received after the close of the comment period will be marked 
``late.'' EPA is not required to consider these late comments. If you 
wish to submit CBI or information that is otherwise protected by 
statute, please follow the instructions in Unit I.D. Do not use EPA 
Dockets or e- mail to submit CBI or information protected by statute.
    1. Electronically. If you submit an electronic comment as 
prescribed in this unit, EPA recommends that you include your name, 
mailing address, and an e- mail address or other contact information in 
the body of your comment. Also include this contact information on the 
outside of any disk or CD ROM you submit, and in any cover letter 
accompanying the disk or CD ROM. This ensures that you can be 
identified as the submitter of the comment and allows EPA to contact 
you in case EPA cannot read your comment due to technical difficulties 
or needs further information on the substance of your comment. EPA's 
policy is that EPA will not edit your comment, and any identifying or 
contact information provided in the body of a comment will be included 
as part of the comment that is placed in the official public docket, 
and made available in EPA's electronic public docket. If EPA cannot 
read your comment due to technical difficulties and cannot contact you 
for clarification, EPA may not be able to consider your comment.
    i. EPA Dockets. Your use of EPA's electronic public docket to 
submit comments to EPA electronically is EPA's preferred method for 
receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket, and follow the online instructions for submitting comments. 
Once in the system, select`` search,'' and then key in docket ID 
number-- OPPT-2002-0072. The system is an`` anonymous access'' system, 
which means EPA will not know your identity, e-mail address, or other 
contact information unless you provide it in the body of your comment.
    ii. E-mail. Comments may be sent by e-mail to [email protected], 
Attention: Docket ID Number OPPT-2002-0072 and PMN Number or TME 
Number. In contrast to EPA's electronic public docket, EPA's e-mail 
system is not an ``anonymous access'' system. If you send an e-mail 
comment directly to the docket without going through EPA's electronic 
public docket, EPA's e-mail system automatically captures your e-mail 
address. E-mail addresses that are automatically captured by EPA's e-
mail system are included as part of the comment that is placed in the 
official public docket, and made available in EPA's electronic public 
docket.
    iii. Disk or CD ROM. You may submit comments on a disk or CD ROM 
that you mail to the mailing address identified in Unit I.C.2. These 
electronic submissions will be accepted in WordPerfect or ASCII file 
format. Avoid the use of special characters and any form of encryption.
    2. By mail. Send your comments to: Document Control Office (7407M), 
Office of Pollution Prevention and Toxics (OPPT), Environmental 
Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-
0001.
    3. By hand delivery or courier. Deliver your comments to: OPPT 
Document Control Office (DCO) in EPA East Building Rm. 6428, 1201 
Constitution Ave., NW., Washington, DC. Attention: Docket ID Number 
OPPT-2002-0072 and PMN Number or TME Number. The DCO is open from 8 
a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The 
telephone number for the DCO is (202) 564-8930.

D. How Should I Submit CBI To the Agency?

    Do not submit information that you consider to be CBI 
electronically through EPA's electronic public docket or by e-mail. You 
may claim information that you submit to EPA as CBI by marking any part 
or all of that information as CBI (if you submit CBI on disk or CD ROM, 
mark the outside of the disk or CD ROM as CBI and then identify 
electronically within the disk or CD ROM the specific information that 
is CBI). Information so marked will not be disclosed except in 
accordance with procedures set forth in 40 CFR part 2.
    In addition to one complete version of the comment that includes 
any information claimed as CBI, a copy of the comment that does not 
contain the information claimed as CBI must be submitted for inclusion 
in the public docket and EPA's electronic public docket. If you submit 
the copy that does not contain CBI on disk or CD ROM, mark the outside 
of the disk or CD ROM clearly that it does not contain CBI. Information 
not marked as CBI will be included in the public docket and EPA's 
electronic public docket without prior notice. If you have any 
questions about CBI or the procedures for claiming CBI, please consult 
the technical person listed under FOR FURTHER INFORMATION CONTACT.

E. What Should I Consider as I Prepare My Comments for EPA?

    You may find the following suggestions helpful for preparing your 
comments:
    1. Explain your views as clearly as possible.
    2. Describe any assumptions that you used.
    3. Provide copies of any technical information and/or data you used 
that support your views.
    4. If you estimate potential burden or costs, explain how you 
arrived at the estimate that you provide.
    5. Provide specific examples to illustrate your concerns.
    6. Offer alternative ways to improve the notice or collection 
activity.
    7. Make sure to submit your comments by the deadline in this 
document.
    8. To ensure proper receipt by EPA, be sure to identify the docket 
ID number assigned to this action and the specific PMN number you are 
commenting on in the subject line on the first page of your response. 
You may also provide the name, date, and Federal Register citation.

II. Why is EPA Taking this Action?

    Section 5 of TSCA requires any person who intends to manufacture 
(defined by statute to include import) a new chemical (i.e., a chemical 
not on the TSCA Inventory to notify EPA and comply with the statutory 
provisions pertaining to the manufacture of new chemicals. Under 
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a 
notice of receipt of a PMN or an application for a TME and to publish 
periodic status reports on the chemicals under review and the receipt 
of notices of commencement to manufacture those chemicals. This status 
report, which

[[Page 77062]]

covers the period from November 2, 2002, to November 19, 2002, consists 
of the PMNs pending or expired, and the notices of commencement to 
manufacture a new chemical that the Agency has received under TSCA 
section 5 during this time period.

III. Receipt and Status Report for PMNs

    This status report identifies the PMNs pending or expired, and the 
notices of commencement to manufacture a new chemical that the Agency 
has received under TSCA section 5 during this time period. If you are 
interested in information that is not included in the following tables, 
you may contact EPA as described in Unit II. to access additional non-
CBI information that may be available.
    In Table I of this unit, EPA provides the following information (to 
the extent that such information is not claimed as CBI) on the PMNs 
received by EPA during this period: the EPA case number assigned to the 
PMN; the date the PMN was received by EPA; the projected end date for 
EPA's review of the PMN; the submitting manufacturer; the potential 
uses identified by the manufacturer in the PMN; and the chemical 
identity.

                                            I. 37 Premanufacture Notices Received From: 11/02/02 to 11/19/02
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                                              Projected Notice End
              Case No.                    Received Date               Date           Manufacturer/Importer           Use                  Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-03-0044                            10/18/02*               01/16/03                Lambent Technologies   (S) Dispersant         (S) Glycerides, soya
                                                                                                                                    mono- and di-
                                                                                                                                    phosphates
P-03-0045                            10/18/02*               01/16/03                Lambent Technologies   (S) Lubricant; mold    (S) Glycerides, soya
                                                                                                             release agent;         mono- and di,
                                                                                                             emulsifier             phosphates, sodium
                                                                                                                                    salts
P-03-0092                            11/04/02                02/02/03                CBI                    (G) Flame/fire         (G) Phosphoric acid
                                                                                                             retardant-open, non-   monoamine salt
                                                                                                             dispersive use
P-03-0093                            11/04/02                02/02/03                CBI                    (G) Epoxy polymer for  (G) Polyglycidyl
                                                                                                             coatings and           ether of (p-hydroxy
                                                                                                             composites             styrene) novolak
P-03-0094                            11/04/02                02/02/03                CBI                    (G) Colorant for       (G) Co-poly-2-methyl-
                                                                                                             plastics               1,5-pentane
                                                                                                                                    isophthalimide
P-03-0095                            11/05/02                02/03/03                CBI                    (G) Viscosity index    (G) Alkyl
                                                                                                             improver               methacrylate
                                                                                                                                    copolymer
P-03-0096                            11/05/02                02/03/03                Henkel Loctite         (S) A component of     (S) Poly[oxy(methyl-
                                                                                      Corporation            adhesive               1,2-ethanediyl)],
                                                                                                             formulations for       alpha,alpha'-[1,3-
                                                                                                             general industrial     phenylenebis[(1-
                                                                                                             bonding applications   methylethylidene)
                                                                                                                                    iminocarbonyl]]bis[.
                                                                                                                                    omega.-[[[[3-
                                                                                                                                    (trimethoxysilyl)pro
                                                                                                                                    pyl]
                                                                                                                                    amino]carbonyl]oxy]-
P-03-0097                            11/05/02                02/03/03                CBI                    (G) Viscosity index    (G) Alkyl
                                                                                                             improver and pour      methacrylate
                                                                                                             point depressant       copolymer
P-03-0098                            11/04/02                02/02/03                The Dow Chemical       (S) Polymer used in    (G) Blocked,
                                                                                      Company                foams and adhesives    isocyanate
                                                                                                             manufacture            terminated urethane
                                                                                                                                    prepolymer
P-03-0099                            11/05/02                02/03/03                CBI                    (S) Industrial         (S) 2-propenoic acid,
                                                                                                             coatings               2-methyl-, butyl
                                                                                                                                    ester, polymer with
                                                                                                                                    butyl 2-propenoate,
                                                                                                                                    ethenylbenzene and
                                                                                                                                    2,5-furandione
P-03-0100                            11/04/02                02/02/03                CBI                    (G) Reactant in        (G) Amine polymer
                                                                                                             thermoset coating
                                                                                                             degree of
                                                                                                             containment -- (c)
                                                                                                             open, non-dispersive
                                                                                                             use
P-03-0101                            11/05/02                02/03/03                CBI                    (G) Rheology           (G) Aliphatic ester
                                                                                                             modifying component
                                                                                                             of funtional fluid
P-03-0102                            11/05/02                02/03/03                CBI                    (G) Rheology           (G) Aliphatic esters
                                                                                                             modifying component
                                                                                                             of functional fluid
P-03-0103                            11/05/02                02/03/03                CBI                    (G) Synthetic          (G) Pentaerythritol
                                                                                                             industrial lubricant   and
                                                                                                             for contained use      dipentaerythritol
                                                                                                                                    mixed esters of
                                                                                                                                    branched and linear
                                                                                                                                    fatty acids
P-03-0104                            11/06/02                02/04/03                CBI                    (G) Agricultural       (G) Tristyryl phenol
                                                                                                             inert                  alkoxylate salt
P-03-0105                            11/07/02                02/05/03                CBI                    (G) Carrier oil        (G) Hydrotreated
                                                                                                             component              petroleum distillate
                                                                                                                                    extract
P-03-0106                            11/08/02                02/06/03                CBI                    (G) Surface treatment  (G) Fluoropolyether
                                                                                                             agent                  derivative
                                                                                                                                    fluoronated
                                                                                                                                    payurethane resin
P-03-0107                            11/08/02                02/06/03                Epson EL Paso, Inc.    (G) Binder resin for   (S) 2-propenoic acid,
                                                                                                             ink                    2-methyl-, polymer
                                                                                                                                    with butyl 2-
                                                                                                                                    propenoate and
                                                                                                                                    ethenylbenzene,
                                                                                                                                    sodium salt
P-03-0108                            11/12/02                02/10/03                CBI                    (G) Textile colorant   (G) Substituted cyan
                                                                                                                                    acetic acid pentyl
                                                                                                                                    ester
P-03-0109                            11/14/02                02/12/03                Morflex Inc.           (S) Coating            (G) Vinyl ether
                                                                                                             (radiation curable);   terminated polyester
                                                                                                             inks (radiation        polymer
                                                                                                             curable); adhesives
                                                                                                             (radiation curable)
P-03-0110                            11/14/02                02/12/03                Estron Chemical, Inc.  (G) Additive for       (G) Optsa/epoxy resin
                                                                                                             coatings industry.
P-03-0111                            11/18/02                02/16/03                CBI                    (G) Material for       (G) Modified
                                                                                                             coating agent          polyvinylalcohol
P-03-0112                            11/18/02                02/16/03                CBI                    (S) Luminescent        (G) Alkaline earth
                                                                                                             pigment used in        aluminate, rare
                                                                                                             safetymarking tape,    earth doped
                                                                                                             signs, toys,
                                                                                                             novelties

[[Page 77063]]

 
P-03-0113                            11/18/02                02/16/03                CBI                    (G) Use as a           (G) Modified evoh
                                                                                                             component of food      polymer
                                                                                                             packaging and other
                                                                                                             industrial uses.
P-03-0114                            11/18/02                02/16/03                CBI                    (G) Use as a           (G) Modified evoh
                                                                                                             component of food      polymer
                                                                                                             packaging and other
                                                                                                             industrial uses.
P-03-0115                            11/18/02                02/16/03                CBI                    (G) Use as a           (G) Modified evoh
                                                                                                             component of food      polymer
                                                                                                             packaging and other
                                                                                                             industrial uses
P-03-0116                            11/19/02                02/17/03                Reterra                (S) Intermediate for   (G) Polyester polyol
                                                                                                             polyester resins
P-03-0117                            11/19/02                02/17/03                CBI                    (G) Pastic additive    (G) Silicate
P-03-0118                            11/19/02                02/17/03                Solutia Inc            (S) Binder for         (G) Epoxy modified
                                                                                                             industrial coatings    alkyd resin
P-03-0119                            11/19/02                02/17/03                Solutia Inc            (S) Binder for         (G) Polyurethane
                                                                                                             industrial coatings    resin
P-03-0120                            11/19/02                02/17/03                Johnson Polymer        (G) Open, non-         (G) Acrylic emulsion
                                                                                                             dispersive use
P-03-0121                            11/19/02                02/17/03                Johnson Polymer        (G) Open, non-         (G) Acrylic emulsion
                                                                                                             dispersive use
P-03-0122                            11/19/02                02/17/03                Johnson Polymer        (G) Open, non-         (G) Acrylic emulsion
                                                                                                             dispersive use
P-03-0123                            11/19/02                02/17/03                Johnson Polymer        (G) Open, non-         (G) Acrylic emulsion
                                                                                                             dispersive use
P-03-0124                            11/19/02                02/17/03                Johnson Polymer        (G) Open, non-         (G) Acrylic emulsion
                                                                                                             dispersive use
P-03-0125                            11/19/02                02/17/03                Johnson Polymer        (G) Open, non-         (G) Acrylic emulsion
                                                                                                             dispersive use
P-03-0126                            11/18/02                02/16/03                Scotia Ventures        (S) Paper coating      (S) Ethanaminium,
                                                                                                             additive; wet-end      n,n,n-trimethyl-2-
                                                                                                             paper additive         [(1-oxo-2-
                                                                                                                                    propenyl)oxy]-,
                                                                                                                                    chloride, polymers
                                                                                                                                    with hydrolyzed
                                                                                                                                    poly(vinyl acetate)
--------------------------------------------------------------------------------------------------------------------------------------------------------
*Entry left over from the October 2002 report.

    In Table II of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the 
Notices of Commencement to manufacture received:

                            II. 22 Notices of Commencement From: 11/02/02 to 11/19/02
----------------------------------------------------------------------------------------------------------------
                                                                Commencement/Import
               Case No.                    Received Date               Date                     Chemical
----------------------------------------------------------------------------------------------------------------
P-00-0899                             11/13/02                11/01/02                (G) Urea alkoxy silane
P-00-1130                             11/07/02                10/21/02                (G) Acetylenic alcohol
P-00-1131                             11/07/02                10/15/02                (G) Alkynyl acetate
P-01-0173                             11/13/02                11/06/02                (G) Silated urethane
                                                                                       polymer
P-01-0529                             11/13/02                11/04/02                (G) Organo aluminium
                                                                                       complex
P-02-0207                             11/07/02                10/30/02                (G) Quaternary salt
P-02-0234                             11/04/02                10/26/02                (G) Sulphonated azo/
                                                                                       hydrazo dye
P-02-0235                             11/04/02                10/26/02                (G) Sulphonated azo/
                                                                                       hydrazo dye
P-02-0515                             11/19/02                11/13/02                (G) Silated urethane resin
P-02-0573                             11/12/02                10/23/02                (G) Cycloaliphatic amine
                                                                                       adducts
P-02-0613                             11/06/02                10/20/02                (G) Polyacrylate resin
P-02-0623                             11/19/02                10/14/02                (G) Substituted cyan
                                                                                       acetic acid butylester
                                                                                       and butoxyethylester
P-02-0624                             11/19/02                10/14/02                (G) Substituted cyan
                                                                                       acetic acid butylester
                                                                                       and butoxyethylester
P-02-0716                             11/04/02                10/23/02                (G) Butyl acrylate,
                                                                                       polymer with styrene and
                                                                                       methylamino chloride
                                                                                       compounds, nitrate
P-02-0739                             11/07/02                10/07/02                (G) Amine salt
P-02-0814                             11/08/02                10/30/02                (G) Aliphatic unsaturated
                                                                                       ketone
P-02-0827                             11/15/02                11/10/02                (G) Bisacylphosphinoxide
P-02-0838                             11/04/02                10/22/02                (G) Dipentaerythritol
                                                                                       ester of branched and
                                                                                       linear fatty acids
P-02-0874                             11/14/02                10/28/02                (S) Hexanedioic acid,
                                                                                       polymer with 2,2-dimethyl-
                                                                                       1,3-propanediol, 1,2-
                                                                                       ethanediamine, 1,6-
                                                                                       hexanediol, 3-hydroxy-2-
                                                                                       (hydroxymethyl)-2-
                                                                                       methylpropanoic acid and
                                                                                       1,1'-methylenebis[4-
                                                                                       isocyanatocyclohexane],
                                                                                       compound with nu,nu-
                                                                                       diethylethanamine
P-94-1901                             11/15/02                10/25/02                (G) Blocked aliphatic
                                                                                       polyisocyanate
P-96-1499                             11/07/02                10/09/02                (G) Aminoslkylmodified
                                                                                       silicone fluid
P-97-0074                             11/14/02                11/08/02                (S) 1,2 ethanediamine,
                                                                                       monohydrochloride
----------------------------------------------------------------------------------------------------------------


[[Page 77064]]

List of Subjects

    Environmental protection, Chemicals, Premanufacturer notices.

    Dated:December 9, 2002.
Sandra R. Wilkins,
Acting Director, Information Management Division, Office of Pollution 
Prevention and Toxics.
[FR Doc. 02-31588 Filed 12-13-02; 8:45 am]
BILLING CODE 6560-50-S