[Federal Register Volume 67, Number 213 (Monday, November 4, 2002)]
[Notices]
[Pages 67185-67189]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 02-28003]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[OPPT-2002-0068; FRL-7279-8]


Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires 
any person who intends to manufacture (defined by statute to include 
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to 
notify EPA and comply with the statutory provisions pertaining to the 
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of 
TSCA, EPA is required to publish a notice of receipt of a 
premanufacture notice (PMN) or an application for a test marketing 
exemption (TME), and to publish periodic status reports on the 
chemicals under review and the receipt of notices of commencement to 
manufacture those chemicals. This status report, which covers the 
period from October 1, 2002 to October 18, 2002, consists of the PMNs 
pending or expired, and the notices of commencement to manufacture a 
new chemical that the Agency has received under TSCA section 5 during 
this time period.

DATES: Comments identified by the docket ID number OPPT-2002-0068 and 
the specific PMN number or TME number, must be received on or before 
December 4, 2002.

ADDRESSES: Comments may be submitted electronically, by mail, or 
through hand delivery/courier. Follow the detailed instructions as 
provided in Unit I. of the SUPPLEMENTARY INFORMATION.

FOR FURTHER INFORMATION CONTACT: Barbara Cunningham, Acting Director, 
Environmental Assistance Division, Office of Pollution Prevention and 
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania 
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; 
e-mail address: [email protected].

[[Page 67186]]


SUPPLEMENTARY INFORMATION:

I. General Information

A. Does This Action Apply to Me?

    This action is directed to the public in general. As such, the 
Agency has not attempted to describe the specific entities that this 
action may apply to. Although others may be affected, this action 
applies directly to the submitter of the premanufacture notices 
addressed in the action. If you have any questions regarding the 
applicability of this action to a particular entity, consult the person 
listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Copies of This Document and Other Related Information?

    1. Docket. EPA has established an official public docket for this 
action under docket identification (ID) number OPPT-2002-0068. The 
official public docket consists of the documents specifically 
referenced in this action, any public comments received, and other 
information related to this action. Although a part of the official 
docket, the public docket does not include Confidential Business 
Information (CBI) or other information whose disclosure is restricted 
by statute. The official public docket is the collection of materials 
that is available for public viewing at the EPA Docket Center, Rm. 
B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, 
DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday 
through Friday, excluding legal holidays. The EPA Docket Center Reading 
Room telephone number is (202) 566-1744 and the telephone number for 
the OPPT Docket, which is located in EPA Docket Center, is (202) 566-
0280.
    2. Electronic access. You may access this Federal Register document 
electronically through the EPA Internet under the ``Federal Register'' 
listings at http://www.epa.gov/fedrgstr/.
    An electronic version of the public docket is available through 
EPA's electronic public docket and comment system, EPA Dockets. You may 
use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public 
comments, access the index listing of the contents of the official 
public docket, and to access those documents in the public docket that 
are available electronically. Although not all docket materials may be 
available electronically, you may still access any of the publicly 
available docket materials through the docket facility identified in 
Unit I.B.1. Once in the system, select ``search,'' then key in the 
appropriate docket ID number.
    Certain types of information will not be placed in the EPA Dockets. 
Information claimed as CBI and other information whose disclosure is 
restricted by statute, which is not included in the official public 
docket, will not be available for public viewing in EPA's electronic 
public docket. EPA's policy is that copyrighted material will not be 
placed in EPA's electronic public docket but will be available only in 
printed, paper form in the official public docket. To the extent 
feasible, publicly available docket materials will be made available in 
EPA's electronic public docket. When a document is selected from the 
index list in EPA Dockets, the system will identify whether the 
document is available for viewing in EPA's electronic public docket. 
Although not all docket materials may be available electronically, you 
may still access any of the publicly available docket materials through 
the docket facility identified in Unit I.B.1. EPA intends to work 
towards providing electronic access to all of the publicly available 
docket materials through EPA's electronic public docket.
    For public commenters, it is important to note that EPA's policy is 
that public comments, whether submitted electronically or in paper, 
will be made available for public viewing in EPA's electronic public 
docket as EPA receives them and without change, unless the comment 
contains copyrighted material, CBI, or other information whose 
disclosure is restricted by statute. When EPA identifies a comment 
containing copyrighted material, EPA will provide a reference to that 
material in the version of the comment that is placed in EPA's 
electronic public docket. The entire printed comment, including the 
copyrighted material, will be available in the public docket.
    Public comments submitted on computer disks that are mailed or 
delivered to the docket will be transferred to EPA's electronic public 
docket. Public comments that are mailed or delivered to the docket will 
be scanned and placed in EPA's electronic public docket. Where 
practical, physical objects will be photographed, and the photograph 
will be placed in EPA's electronic public docket along with a brief 
description written by the docket staff.

C. How and To Whom Do I Submit Comments?

    You may submit comments electronically, by mail, or through hand 
delivery/courier. To ensure proper receipt by EPA, identify the 
appropriate docket ID number and specific PMN number or TME number in 
the subject line on the first page of your comment. Please ensure that 
your comments are submitted within the specified comment period. 
Comments received after the close of the comment period will be marked 
``late.'' EPA is not required to consider these late comments. If you 
wish to submit CBI or information that is otherwise protected by 
statute, please follow the instructions in Unit I.D. Do not use EPA 
Dockets or e-mail to submit CBI or information protected by statute.
    1. Electronically. If you submit an electronic comment as 
prescribed in this unit, EPA recommends that you include your name, 
mailing address, and an e- mail address or other contact information in 
the body of your comment. Also include this contact information on the 
outside of any disk or CD ROM you submit, and in any cover letter 
accompanying the disk or CD ROM. This ensures that you can be 
identified as the submitter of the comment and allows EPA to contact 
you in case EPA cannot read your comment due to technical difficulties 
or needs further information on the substance of your comment. EPA's 
policy is that EPA will not edit your comment, and any identifying or 
contact information provided in the body of a comment will be included 
as part of the comment that is placed in the official public docket, 
and made available in EPA's electronic public docket. If EPA cannot 
read your comment due to technical difficulties and cannot contact you 
for clarification, EPA may not be able to consider your comment.
    i. EPA Dockets. Your use of EPA's electronic public docket to 
submit comments to EPA electronically is EPA's preferred method for 
receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket, and follow the online instructions for submitting comments. 
Once in the system, select ``search,'' and then key in docket ID 
number-- OPPT-2002-0068. The system is an ``anonymous access'' system, 
which means EPA will not know your identity, e-mail address, or other 
contact information unless you provide it in the body of your comment.
    ii. E-mail. Comments may be sent by e-mail to [email protected], 
Attention: Docket ID Number OPPT-2002-0068 and PMN Number or TME 
Number. In contrast to EPA's electronic public docket, EPA's e-mail 
system is not an ``anonymous access'' system. If you send an e-mail 
comment directly to the docket without going through EPA's electronic 
public docket, EPA's e-mail system automatically captures your e-mail 
address. E-mail addresses that are automatically captured by EPA's e-
mail

[[Page 67187]]

system are included as part of the comment that is placed in the 
official public docket, and made available in EPA's electronic public 
docket.
    iii. Disk or CD ROM. You may submit comments on a disk or CD ROM 
that you mail to the mailing address identified in Unit I.C.2. These 
electronic submissions will be accepted in WordPerfect or ASCII file 
format. Avoid the use of special characters and any form of encryption.
    2. By mail. Send your comments to: Document Control Office (7407M), 
Office of Pollution Prevention and Toxics (OPPT), Environmental 
Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-
0001.
    3. By hand delivery or courier. Deliver your comments to: OPPT 
Document Control Office (DCO) in EPA East Building Rm. 6428, 1201 
Constitution Ave., NW., Washington, DC. Attention: Docket ID Number 
OPPT-2002-0068 and PMN Number or TME Number. The DCO is open from 8 
a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The 
telephone number for the DCO is (202) 564-8930.

D. How Should I Submit CBI to the Agency?

    Do not submit information that you consider to be CBI 
electronically through EPA's electronic public docket or by e-mail. You 
may claim information that you submit to EPA as CBI by marking any part 
or all of that information as CBI (if you submit CBI on disk or CD ROM, 
mark the outside of the disk or CD ROM as CBI and then identify 
electronically within the disk or CD ROM the specific information that 
is CBI). Information so marked will not be disclosed except in 
accordance with procedures set forth in 40 CFR part 2.
    In addition to one complete version of the comment that includes 
any information claimed as CBI, a copy of the comment that does not 
contain the information claimed as CBI must be submitted for inclusion 
in the public docket and EPA's electronic public docket. If you submit 
the copy that does not contain CBI on disk or CD ROM, mark the outside 
of the disk or CD ROM clearly that it does not contain CBI. Information 
not marked as CBI will be included in the public docket and EPA's 
electronic public docket without prior notice. If you have any 
questions about CBI or the procedures for claiming CBI, please consult 
the technical person listed under FOR FURTHER INFORMATION CONTACT.

E. What Should I Consider as I Prepare My Comments for EPA?

    You may find the following suggestions helpful for preparing your 
comments:
    1. Explain your views as clearly as possible.
    2. Describe any assumptions that you used.
    3. Provide copies of any technical information and/or data you used 
that support your views.
    4. If you estimate potential burden or costs, explain how you 
arrived at the estimate that you provide.
    5. Provide specific examples to illustrate your concerns.
    6. Offer alternative ways to improve the notice or collection 
activity.
    7. Make sure to submit your comments by the deadline in this 
document.
    8. To ensure proper receipt by EPA, be sure to identify the docket 
ID number assigned to this action and the specific PMN number you are 
commenting on in the subject line on the first page of your response. 
You may also provide the name, date, and Federal Register citation.

II. Why Is EPA Taking This Action?

    Section 5 of TSCA requires any person who intends to manufacture 
(defined by statute to include import) a new chemical (i.e., a chemical 
not on the TSCA Inventory to notify EPA and comply with the statutory 
provisions pertaining to the manufacture of new chemicals. Under 
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a 
notice of receipt of a PMN or an application for a TME and to publish 
periodic status reports on the chemicals under review and the receipt 
of notices of commencement to manufacture those chemicals. This status 
report, which covers the period from October 1, 2002 to October 18, 
2002, consists of the PMNs pending or expired, and the notices of 
commencement to manufacture a new chemical that the Agency has received 
under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs

    This status report identifies the PMNs pending or expired, and the 
notices of commencement to manufacture a new chemical that the Agency 
has received under TSCA section 5 during this time period. If you are 
interested in information that is not included in the following tables, 
you may contact EPA as described in Unit II. to access additional non-
CBI information that may be available.
    In Table I of this unit, EPA provides the following information (to 
the extent that such information is not claimed as CBI) on the PMNs 
received by EPA during this period: the EPA case number assigned to the 
PMN; the date the PMN was received by EPA; the projected end date for 
EPA's review of the PMN; the submitting manufacturer; the potential 
uses identified by the manufacturer in the PMN; and the chemical 
identity.

                                            I. 43 Premanufacture Notices Received From: 10/01/02 to 10/18/02
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                                              Projected Notice End
              Case No.                    Received Date               Date           Manufacturer/Importer           Use                  Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-03-0001                            10/01/02                12/30/02                CIBA Specialty         (S) Light stabilizer   (G) Substituted
                                                                                      Chemicals              for coatings           triazine derivatives
                                                                                      Corporation
P-03-0002                            10/01/02                12/30/02                The Dow Chemical       (S) Polymer used in    (G) Blocked,
                                                                                      Company                foams and adhesives    isocyanate
                                                                                                             manufacture            terminated urethane
                                                                                                                                    prepolymer
P-03-0003                            10/01/02                12/30/02                Burlington Chemical    (G) Fabric             (S) Soybean oil,
                                                                                      Company, Inc.          conditioning agent     reaction products
                                                                                                                                    with hydrogenated
                                                                                                                                    soybean oil and
                                                                                                                                    triethanolamine, di-
                                                                                                                                    et sulfate-
                                                                                                                                    quaternized
P-03-0004                            10/02/02                12/31/02                E.I. Dupont De         (G) Coating            (S) Titanium,
                                                                                      Nemours and Co.        stabilizer for non-    acetylacetone et
                                                                                                             dispersive use;        alc. iso-pr alc.
                                                                                                             catalyst used in       complexes
                                                                                                             closed process

[[Page 67188]]

 
P-03-0005                            10/02/02                12/31/02                Cook Composites and    (S) Industrial/        (G) 2-propenoic acid,
                                                                                      Polymers Co.           maintenance coatings   2-methyl-,alkyl
                                                                                                             resin                  ester, telomer with
                                                                                                                                    butyl 2-propenoate,
                                                                                                                                    2-
                                                                                                                                    (dimethylamino)ethyl-
                                                                                                                                    2-methyl-2-
                                                                                                                                    propenoate,1-
                                                                                                                                    dodecanethiol,
                                                                                                                                    ethenylbenzene,2-
                                                                                                                                    hydroxyethyl-2-
                                                                                                                                    methyl-2-propenoate
                                                                                                                                    and methyl 2-methyl-
                                                                                                                                    2-propenoate, 1,1-
                                                                                                                                    dimethylpropyl-2-
                                                                                                                                    ethylhexaneperoxoate-
                                                                                                                                    initiated
P-03-0006                            10/03/02                01/01/03                Degussa Corporation    (S) Monomer in the     (G) Alkylamino
                                                                                                             production of a        functional silane
                                                                                                             polymer
P-03-0007                            10/03/02                01/01/03                CBI                    (S) Ingredient for     (G) Alkyl cinnamic
                                                                                                             use in fragrances      aldehyde
                                                                                                             for soaps,
                                                                                                             detergents, cleaners
                                                                                                             and other household
                                                                                                             products
P-03-0008                            10/07/02                01/05/03                Reichhold, Inc.        (G) Industrial         (G) Hydroxyester
                                                                                                             coatings               acrylate, polymer
                                                                                                                                    with alkanediol
                                                                                                                                    polymer and
                                                                                                                                    isocyanate.
P-03-0009                            10/07/02                01/05/03                CBI                    (G) Pressure           (G) Acrylic polymer
                                                                                                             sensitive adhesive
P-03-0010                            10/07/02                01/05/03                Reichhold, Inc.        (G) Industrial         (G) Hydroxyester
                                                                                                             coating                acrylate, polymer
                                                                                                                                    with isocyanate and
                                                                                                                                    alkanediol
P-03-0011                            10/08/02                01/06/03                CBI                    (G) Petroleum          (G) Organometallic
                                                                                                             additive               sulfide complex
P-03-0012                            10/08/02                01/06/03                CBI                    (G) Surfactant         (G) Alkylamides,
                                                                                                                                    ethoxylated
P-03-0013                            10/08/02                01/06/03                CBI                    (G) Surfactant         (G) Alkylamides,
                                                                                                                                    ethoxylated
P-03-0014                            10/08/02                01/06/03                CBI                    (G) Open, non          (G) Crosslinking
                                                                                                             dispersive (coating    stoving urethane
                                                                                                             applications)          resin
P-03-0015                            10/08/02                01/06/03                CBI                    (G) Surfactant         (G) Alkyl ether
                                                                                                                                    sulfuric acid, amine
                                                                                                                                    salt
P-03-0016                            10/09/02                01/07/03                CBI                    (G) Resin coating      (G) Polyurethane
P-03-0017                            10/09/02                01/07/03                CBI                    (G) Lubricant          (G) Fatty acid amide
                                                                                                             additive.
P-03-0018                            10/11/02                01/09/03                CBI                    (G) Raw material for   (G) Polysubstituted
                                                                                                             manufacturing of       imidazole
                                                                                                             photosensitive
                                                                                                             material
P-03-0019                            10/15/02                01/13/03                CBI                    (G) Open, non-         (G) Aliphatic,
                                                                                                             dispersive (resin)     hydroxyl-bearing
                                                                                                                                    polyester
                                                                                                                                    polyurethane resin
P-03-0020                            10/15/02                01/13/03                CBI                    (G) Open, non-         (G) Aliphatic
                                                                                                             dispersive (resin)     hydroxyfunctional
                                                                                                                                    polyester
                                                                                                                                    polyurethane resin
P-03-0021                            10/15/02                01/13/03                The Purolite Company   (S) An ion exhange     (S) 2-propenenitrile,
                                                                                                             resin for              polymer with
                                                                                                             demineralization of    diethenylbenzene,
                                                                                                             water or process       hydrolyzed, reaction
                                                                                                             fluids                 products with
                                                                                                                                    diethylenetriamine
P-03-0022                            10/15/02                01/13/03                CBI                    (S) Resin for          (G) Modified
                                                                                                             printing ink           hydrocarbon resin
P-03-0023                            10/15/02                01/13/03                CBI                    (S) Resin for          (G) Modified
                                                                                                             printing ink           hydrocarbon resin
P-03-0024                            10/15/02                01/13/03                CBI                    (S) Resin for          (G) Modified
                                                                                                             printing ink           hydrocarbon resin
P-03-0025                            10/15/02                01/13/03                CBI                    (S) Resin for          (G) Modified
                                                                                                             printing ink           hydrocarbon resin
P-03-0026                            10/15/02                01/13/03                CBI                    (S) Resin for          (G) Modified
                                                                                                             printing ink           hydrocarbon resin
P-03-0027                            10/15/02                01/13/03                CBI                    (S) Resin for          (G) Modified
                                                                                                             printing ink           hydrocarbon resin
P-03-0028                            10/16/02                01/14/03                CBI                    (G) Friction reducing  (G) Alkene acrylate
                                                                                                             polymer for use in     copolymer
                                                                                                             engineering plastics
                                                                                                             (open/non-dispersive
                                                                                                             use)
P-03-0029                            10/15/02                01/13/03                CBI                    (S) A colorant for     (G) Disazo yellow
                                                                                                             plastics               pigment
P-03-0030                            10/17/02                01/15/03                Cytec Engineered       (G) Resin for non-     (G) Epoxy-amine
                                                                                      Materials Inc. (CEM)   dispersive use.        adduct
P-03-0031                            10/17/02                01/15/03                CBI                    (G) Resin coating      (G) Urethane acrylate
P-03-0032                            10/17/02                01/15/03                3M Company             (G) Protective         (G) Blocked
                                                                                                             treatment              fluoroChemical
                                                                                                                                    urethane
P-03-0033                            10/17/02                01/15/03                3M Company             (G) Chemical           (G) FluoroChemical
                                                                                                             intermediate           alcohol
P-03-0034                            10/18/02                01/16/03                EPM Services, Inc.     (S) Pulper             (S) Formic acid,
                                                                                                             conditioner for        potassium salt (1:2)
                                                                                                             treatment of the
                                                                                                             pulper water system
                                                                                                             on ships
P-03-0035                            10/17/02                01/15/03                CBI                    (G) Polymer used to    (G) Alkene acyylate
                                                                                                             improve scratch        copolymer
                                                                                                             resistance of
                                                                                                             thermoplastics (open/
                                                                                                             non-dispersive use)
P-03-0036                            10/17/02                01/15/03                CBI                    (G) Polishing          (G) Acrylic acid co-
                                                                                                             compound               polymer
P-03-0037                            10/18/02                01/16/03                CBI                    (G) Colourant          (G) Copper(11)
                                                                                                                                    complex of
                                                                                                                                    sulfonated azo dye
                                                                                                                                    intermediate
P-03-0038                            10/18/02                01/16/03                CBI                    (G) Colourant          (G) Copper(11)
                                                                                                                                    complex of
                                                                                                                                    sulfonated azo dye
P-03-0039                            10/18/02                01/16/03                CIBA Specialty         (S) Antioxidant for    (G) Amine stabilizer
                                                                                      Chemicals              elastomers
                                                                                      Corporation

[[Page 67189]]

 
P-03-0040                            10/18/02                01/16/03                CBI                    (S) Retention agent    (G) Polyamidoamine
                                                                                                             in paper making        resin grafted with
                                                                                                             process prior to       aziridine.
                                                                                                             sheet formation
P-03-0041                            10/18/02                01/16/03                CBI                    (G) Chemical           (G) Alkyl silane
                                                                                                             intermediate -         methacrylate
                                                                                                             destructive use
P-03-0042                            10/18/02                01/16/03                CBI                    (G) Surfactant         (G) Alkylamides,
                                                                                                                                    ethoxylated
P-03-0043                            10/18/02                01/16/03                CBI                    (G) Resin component -  (G) Substituted
                                                                                                             destructive use        phenolic polymer
--------------------------------------------------------------------------------------------------------------------------------------------------------

    In Table II of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the 
Notices of Commencement to manufacture received:

                            II. 29 Notices of Commencement From: 10/01/02 to 10/18/02
----------------------------------------------------------------------------------------------------------------
                                                                Commencement/Import
               Case No.                    Received Date               Date                     Chemical
----------------------------------------------------------------------------------------------------------------
P-01-0111                             10/03/02                09/25/02                (G) Benzothiazine
P-01-0213                             10/18/02                10/06/02                (G) Hydrocarbon resin
P-01-0442                             10/16/02                09/29/02                (S) Xonotlite
P-02-0025                             10/01/02                07/25/02                (S) Aluminum cesium
                                                                                       fluoride
P-02-0058                             10/18/02                09/18/02                (G) N-substituted-2-methyl-
                                                                                       2-propenamide
P-02-0389                             10/01/02                08/27/02                (G) Alkyd resin
P-02-0396                             10/18/02                09/17/02                (G) Aliphatic substituted
                                                                                       amide
P-02-0416                             10/01/02                08/27/02                (G) Alkyd resin
P-02-0434                             10/08/02                09/23/02                (G) Polyester resin
P-02-0532                             10/02/02                09/13/02                (G) Acrylic solution
                                                                                       polymer
P-02-0579                             10/01/02                09/12/02                (G) Polyester isocyanate
P-02-0631                             10/18/02                10/02/02                (G) Substituted
                                                                                       naphthalene sulfonic
                                                                                       acid, alkali salt
P-02-0632                             10/09/02                09/10/02                (G) Acrylic polymer
P-02-0650                             10/04/02                09/04/02                (G) Aromatic polyester
                                                                                       polyol
P-02-0662                             10/18/02                10/02/02                (G) Substituted
                                                                                       naphthalene sulfonic
                                                                                       acid, alkali salt
P-02-0696                             10/16/02                10/04/02                (G) Styrene-methacrylate
                                                                                       copolymer
P-02-0697                             10/17/02                09/26/02                (G) Dineopentyl-4-
                                                                                       substituted phthalate
P-02-0730                             10/07/02                09/06/02                (G) Polytertiaryamine
                                                                                       glycol
P-02-0731                             10/15/02                09/30/02                (S) Fatty acids, C16-18
                                                                                       and C18-unsaturated,
                                                                                       branched and linear,
                                                                                       reaction products with
                                                                                       polyethylenepolyamines
P-02-0742                             10/04/02                09/18/02                (G) Polyurethane
P-02-0754                             10/08/02                09/27/02                (G) Amine modified epoxy
                                                                                       resin
P-02-0756                             10/08/02                09/27/02                (G) Amine modified epoxy
                                                                                       resin
P-02-0819                             10/08/02                10/02/02                (G) Polymer of alkylene
                                                                                       polyester and
                                                                                       methylenebis
                                                                                       [isocyanatobenzene]
P-96-0281                             10/16/02                07/22/02                (S) Fatty acids, C18-
                                                                                       unsaturated, dimers,
                                                                                       hydrogenated,
                                                                                       diisooctadecyl esters
P-99-0039                             10/16/02                09/26/02                (G) Aliphatic urethane
                                                                                       acrylate
P-99-0103                             10/16/02                09/26/02                (G) Acrylated oligoamine
P-99-0207                             10/02/02                08/12/02                (S) L-glutamic acid, n-(1-
                                                                                       oxododecyl)-, disodium
                                                                                       salt
P-99-0208                             10/02/02                09/11/02                (S) L-glutamic acid, n-(1-
                                                                                       oxododecyl)-
P-99-0805                             10/01/02                09/20/02                (G) Modified polyester
                                                                                       isocyanate prepolymer
----------------------------------------------------------------------------------------------------------------

List of Subjects

    Environmental protection, Chemicals, Premanufacturer notices.

    Dated: October 24, 2002.
Sandra R. Wilkins,
Acting Director, Information Management Division, Office of Pollution 
Prevention and Toxics.
[FR Doc. 02-28003 Filed 11-1-02; 8:45 am]
BILLING CODE 6560-50-S