[Federal Register Volume 67, Number 200 (Wednesday, October 16, 2002)]
[Notices]
[Pages 63918-63922]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 02-26306]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[OPPT-2002-0058; FRL-7277-1]


Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires 
any person who intends to manufacture (defined by statute to include 
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to 
notify EPA and comply with the statutory provisions pertaining to the 
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of 
TSCA, EPA is required to publish a notice of receipt of a 
premanufacture notice (PMN) or an application for a test marketing 
exemption (TME), and to publish periodic status reports on the 
chemicals under review and the receipt of notices of commencement to 
manufacture those chemicals. This status report, which covers the 
period from August 26, 2002 to September 11, 2002, consists of the PMNs 
pending or expired, and the notices of commencement to manufacture a 
new chemical that the Agency has received under TSCA section 5 during 
this time period.

DATES: Comments identified by the docket ID number OPPT- 2002-0058 and 
the specific PMN number or TME number, must be received on or before 
November 15, 2002.

ADDRESSES: Comments may be submitted electronically, by mail, or 
through hand delivery/courier. Follow the detailed instructions as 
provided in Unit I. of the SUPPLEMENTARY INFORMATION.

FOR FURTHER INFORMATION CONTACT: Barbara Cunningham, Acting Director, 
Environmental Assistance Division, Office of Pollution Prevention and 
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania 
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-

[[Page 63919]]

1404; e-mail address: [email protected].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

    This action is directed to the public in general. As such, the 
Agency has not attempted to describe the specific entities that this 
action may apply to. Although others may be affected, this action 
applies directly to the submitter of the premanufacture notices 
addressed in the action. If you have any questions regarding the 
applicability of this action to a particular entity, consult the person 
listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Copies of This Document and Other Related Information?

    1. Docket. EPA has established an official public docket for this 
action under docket identification (ID) number OPPT-2002-0058. The 
official public docket consists of the documents specifically 
referenced in this action, any public comments received, and other 
information related to this action. Although a part of the official 
docket, the public docket does not include Confidential Business 
Information (CBI) or other information whose disclosure is restricted 
by statute. The official public docket is the collection of materials 
that is available for public viewing at the EPA Docket Center, Rm. 
B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, 
DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday 
through Friday, excluding legal holidays. The EPA Docket Center Reading 
Room telephone number is (202) 566-1744 and the telephone number for 
the OPPT Docket, which is located in EPA Docket Center, is (202) 566-
0280.
    2. Electronic access. You may access this Federal Register document 
electronically through the EPA Internet under the ``Federal Register'' 
listings at http://www.epa.gov/fedrgstr/.
    An electronic version of the public docket is available through 
EPA's electronic public docket and comment system, EPA Dockets. You may 
use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public 
comments, access the index listing of the contents of the official 
public docket, and to access those documents in the public docket that 
are available electronically. Although not all docket materials may be 
available electronically, you may still access any of the publicly 
available docket materials through the docket facility identified in 
Unit I.B.1. Once in the system, select ``search,'' then key in the 
appropriate docket ID number.
    Certain types of information will not be placed in the EPA Dockets. 
Information claimed as CBI and other information whose disclosure is 
restricted by statute, which is not included in the official public 
docket, will not be available for public viewing in EPA's electronic 
public docket. EPA's policy is that copyrighted material will not be 
placed in EPA's electronic public docket but will be available only in 
printed, paper form in the official public docket. To the extent 
feasible, publicly available docket materials will be made available in 
EPA's electronic public docket. When a document is selected from the 
index list in EPA Dockets, the system will identify whether the 
document is available for viewing in EPA's electronic public docket. 
Although not all docket materials may be available electronically, you 
may still access any of the publicly available docket materials through 
the docket facility identified in Unit I.B.1. EPA intends to work 
towards providing electronic access to all of the publicly available 
docket materials through EPA's electronic public docket.
    For public commenters, it is important to note that EPA's policy is 
that public comments, whether submitted electronically or in paper, 
will be made available for public viewing in EPA's electronic public 
docket as EPA receives them and without change, unless the comment 
contains copyrighted material, CBI, or other information whose 
disclosure is restricted by statute. When EPA identifies a comment 
containing copyrighted material, EPA will provide a reference to that 
material in the version of the comment that is placed in EPA's 
electronic public docket. The entire printed comment, including the 
copyrighted material, will be available in the public docket.
    Public comments submitted on computer disks that are mailed or 
delivered to the docket will be transferred to EPA's electronic public 
docket. Public comments that are mailed or delivered to the docket will 
be scanned and placed in EPA's electronic public docket. Where 
practical, physical objects will be photographed, and the photograph 
will be placed in EPA's electronic public docket along with a brief 
description written by the docket staff.

C. How and To Whom Do I Submit Comments?

    You may submit comments electronically, by mail, or through hand 
delivery/courier. To ensure proper receipt by EPA, identify the 
appropriate docket ID number and specific PMN number or TME number in 
the subject line on the first page of your comment. Please ensure that 
your comments are submitted within the specified comment period. 
Comments received after the close of the comment period will be marked 
``late.'' EPA is not required to consider these late comments. If you 
wish to submit CBI or information that is otherwise protected by 
statute, please follow the instructions in Unit I.D. Do not use EPA 
Dockets or e- mail to submit CBI or information protected by statute.
    1. Electronically. If you submit an electronic comment as 
prescribed in this unit, EPA recommends that you include your name, 
mailing address, and an e-mail address or other contact information in 
the body of your comment. Also include this contact information on the 
outside of any disk or CD ROM you submit, and in any cover letter 
accompanying the disk or CD ROM. This ensures that you can be 
identified as the submitter of the comment and allows EPA to contact 
you in case EPA cannot read your comment due to technical difficulties 
or needs further information on the substance of your comment. EPA's 
policy is that EPA will not edit your comment, and any identifying or 
contact information provided in the body of a comment will be included 
as part of the comment that is placed in the official public docket, 
and made available in EPA's electronic public docket. If EPA cannot 
read your comment due to technical difficulties and cannot contact you 
for clarification, EPA may not be able to consider your comment.
    i. EPA Dockets. Your use of EPA's electronic public docket to 
submit comments to EPA electronically is EPA's preferred method for 
receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket, and follow the online instructions for submitting comments. 
Once in the system, select`` search,'' and then key in docket ID 
number-- OPPT-2002-0058. The system is an`` anonymous access'' system, 
which means EPA will not know your identity, e-mail address, or other 
contact information unless you provide it in the body of your comment.
    ii. E-mail. Comments may be sent by e-mail to [email protected], 
Attention: Docket ID Number OPPT-2002-0058 and PMN Number or TME 
Number. In contrast to EPA's electronic public docket, EPA's e-mail 
system is not an ``anonymous access'' system. If you send an e-mail 
comment directly to the docket without going through EPA's electronic 
public docket, EPA's e-mail

[[Page 63920]]

system automatically captures your e-mail address. E-mail addresses 
that are automatically captured by EPA's e-mail system are included as 
part of the comment that is placed in the official public docket, and 
made available in EPA's electronic public docket.
    iii. Disk or CD ROM. You may submit comments on a disk or CD ROM 
that you mail to the mailing address identified in Unit I.C.2. These 
electronic submissions will be accepted in WordPerfect or ASCII file 
format. Avoid the use of special characters and any form of encryption.
    2. By mail. Send your comments to: Document Control Office (7407M), 
Office of Pollution Prevention and Toxics (OPPT), Environmental 
Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-
0001.
    3. By hand delivery or courier. Deliver your comments to: OPPT 
Document Control Office (DCO) in EPA East Building Rm. 6428, 1201 
Constitution Ave., NW., Washington, DC. Attention: Docket ID Number 
OPPT-2002-0058 and PMN Number or TME Number. The DCO is open from 8 
a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The 
telephone number for the DCO is (202) 564-8930.

D. How Should I Submit CBI To the Agency?

    Do not submit information that you consider to be CBI 
electronically through EPA's electronic public docket or by e-mail. You 
may claim information that you submit to EPA as CBI by marking any part 
or all of that information as CBI (if you submit CBI on disk or CD ROM, 
mark the outside of the disk or CD ROM as CBI and then identify 
electronically within the disk or CD ROM the specific information that 
is CBI). Information so marked will not be disclosed except in 
accordance with procedures set forth in 40 CFR part 2.
    In addition to one complete version of the comment that includes 
any information claimed as CBI, a copy of the comment that does not 
contain the information claimed as CBI must be submitted for inclusion 
in the public docket and EPA's electronic public docket. If you submit 
the copy that does not contain CBI on disk or CD ROM, mark the outside 
of the disk or CD ROM clearly that it does not contain CBI. Information 
not marked as CBI will be included in the public docket and EPA's 
electronic public docket without prior notice. If you have any 
questions about CBI or the procedures for claiming CBI, please consult 
the technical person listed under FOR FURTHER INFORMATION CONTACT.

E. What Should I Consider as I Prepare My Comments for EPA?

    You may find the following suggestions helpful for preparing your 
comments:
    1. Explain your views as clearly as possible.
    2. Describe any assumptions that you used.
    3. Provide copies of any technical information and/or data you used 
that support your views.
    4. If you estimate potential burden or costs, explain how you 
arrived at the estimate that you provide.
    5. Provide specific examples to illustrate your concerns.
    6. Offer alternative ways to improve the notice or collection 
activity.
    7. Make sure to submit your comments by the deadline in this 
document.
    8. To ensure proper receipt by EPA, be sure to identify the docket 
ID number assigned to this action and the specific PMN number you are 
commenting on in the subject line on the first page of your response. 
You may also provide the name, date, and Federal Register citation.

II. Why is EPA Taking this Action?

    Section 5 of TSCA requires any person who intends to manufacture 
(defined by statute to include import) a new chemical (i.e., a chemical 
not on the TSCA Inventory to notify EPA and comply with the statutory 
provisions pertaining to the manufacture of new chemicals. Under 
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a 
notice of receipt of a PMN or an application for a TME and to publish 
periodic status reports on the chemicals under review and the receipt 
of notices of commencement to manufacture those chemicals. This status 
report, which covers the period from August 26, 2002 to September 11, 
2002, consists of the PMNs pending or expired, and the notices of 
commencement to manufacture a new chemical that the Agency has received 
under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs

    This status report identifies the PMNs pending or expired, and the 
notices of commencement to manufacture a new chemical that the Agency 
has received under TSCA section 5 during this time period. If you are 
interested in information that is not included in the following tables, 
you may contact EPA as described in Unit II. to access additional non-
CBI information that may be available.
    In Table I of this unit, EPA provides the following information (to 
the extent that such information is not claimed as CBI) on the PMNs 
received by EPA during this period: the EPA case number assigned to the 
PMN; the date the PMN was received by EPA; the projected end date for 
EPA's review of the PMN; the submitting manufacturer; the potential 
uses identified by the manufacturer in the PMN; and the chemical 
identity.

                                            I. 38 Premanufacture Notices Received From: 08/26/02 to 09/11/02
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                                              Projected Notice End
              Case No.                    Received Date               Date           Manufacturer/Importer           Use                  Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-02-0957                            08/26/02                11/24/02                CIBA Specialty         (S) Photoinitiator     (G) Aromatic mixed
                                                                                      Chemicals              for coatings           esters
                                                                                      Corporation
P-02-0958                            08/26/02                11/24/02                Von Roll Isola USA,    (S) Electrical         (G) Unsaturated
                                                                                      Inc.                   insulating varnish     polyester-imide
                                                                                                             for motors,
                                                                                                             generators,
                                                                                                             transformers
P-02-0959                            08/26/02                11/24/02                CBI                    (S) Thickener for      (G) Ethoxylate/
                                                                                                             water-based paints     urethane copolymer
                                                                                                             and adhesives
P-02-0960                            08/26/02                11/24/02                CBI                    (G) Additive in        (G) Metallic acrylate
                                                                                                             radiation cured
                                                                                                             coatings, adhesives
                                                                                                             and inks.
P-02-0961                            08/27/02                11/25/02                Oxford Organics, Inc.  (G) Colorant           (G) Spiro
                                                                                                                                    naphthoxazine
P-02-0962                            08/27/02                11/25/02                DIC International      (G) Binder             (G) Acryl based
                                                                                      (USA), Inc.                                   copolymer
P-02-0963                            08/28/02                11/26/02                Solutia Inc            (S) Binder for         (G) Modified alkyd
                                                                                                             industrial coatings    resin
P-02-0964                            08/29/02                11/27/02                Solutia Inc            (S) Binder for         (G) Modified alkyd
                                                                                                             industrial coatings    resin

[[Page 63921]]

 
P-02-0965                            08/30/02                11/28/02                Forbo Adhesives, LLC   (G) Hot melt           (G) Isocyanate
                                                                                                             polyurethane           functional polyester
                                                                                                             adhesive               polyether urethane
                                                                                                                                    polymer
P-02-0966                            08/29/02                11/27/02                CBI                    (G) Structural         (G) Modified
                                                                                                             material (open, non-   polyacrylate
                                                                                                             dispersive)
P-02-0967                            08/29/02                11/27/02                CBI                    (G) Structural         (G) Modified
                                                                                                             material (open, non-   polyacrylate
                                                                                                             dispersive)
P-02-0968                            08/29/02                11/27/02                CBI                    (G) Structural         (G) Modified
                                                                                                             material (open, non-   polyacrylate
                                                                                                             dispersive)
P-02-0969                            08/30/02                11/28/02                CBI                    (G) Sealant component  (G) Polymer of a
                                                                                                                                    carbomonocyclic
                                                                                                                                    diisocyanate, a
                                                                                                                                    modified polyalkene,
                                                                                                                                    hydroxyalkane and a
                                                                                                                                    substituted
                                                                                                                                    alkoxysilane
P-02-0970                            08/29/02                11/27/02                BASF Corporation       (G) Internal press     (G) Alkoxylated
                                                                                                             release                urethane
P-02-0971                            08/29/02                11/27/02                BASF Corporation       (G) Internal press     (G) Alkoxylated
                                                                                                             release                urethane
P-02-0972                            08/29/02                11/27/02                BASF Corporation       (G) Surfactant         (G) Alkoxylated
                                                                                                                                    substituted phenol
P-02-0973                            08/29/02                11/27/02                BASF Corporation       (G) Surfactant         (G) Alkoxylated
                                                                                                                                    substituted phenol
P-02-0974                            09/04/02                12/03/02                Bedoukian Research,    (S) Use as specialty   (S) 3-octen-1-
                                                                                      Inc.                   fragrance (ffdca);     ol,propanoate, (3z)-
                                                                                                             fragrance use:
                                                                                                             (soaps, detergents,
                                                                                                             air fresheners,
                                                                                                             scented papers).
P-02-0975                            09/04/02                12/03/02                CBI                    (G) Toner binder for   (G) Polyester resin
                                                                                                             copiers or laser
                                                                                                             printers
P-02-0976                            08/28/02                11/26/02                CBI                    (G) Destructive use    (G)
                                                                                                                                    Tetrabromophthalate
                                                                                                                                    diol
P-02-0977                            09/05/02                12/04/02                J.M. Huber             (S) Industrial         (G) Surface treated
                                                                                      Corporattion           coating                kaolin
P-02-0978                            09/05/02                12/04/02                CBI                    (S) Substrate water    (S) Lanthanum
                                                                                                                                    aluminum oxide or
                                                                                                                                    lanthanum aluminate
                                                                                                                                    (the 9ci name is
                                                                                                                                    listed as aluminum
                                                                                                                                    lanthanum oxide)
P-02-0979                            09/04/02                12/03/02                Solutia Inc.           (S) Wash primer for    (G) Epoxy modified
                                                                                                             metal protection       polyvinyl butyral
P-02-0980                            09/06/02                12/05/02                CBI                    (G) Thermoset polymer  (G) Brominated epoxy
                                                                                                             component, open        resin
                                                                                                             nondispersive use
P-02-0981                            09/06/02                12/05/02                CBI                    (G) Thermoset polymer  (G) Aromatic diol,
                                                                                                             component, open        acrylate,
                                                                                                             nondispersive use      acrylonitrile,
                                                                                                                                    butadiene rubber-
                                                                                                                                    extended epoxy resin
P-02-0982                            09/06/02                12/05/02                CBI                    (G) Thermostat         (G) Sulfonylamine
                                                                                                             polymer component,     extended epoxy resin
                                                                                                             open nondispersive
                                                                                                             use
P-02-0983                            09/06/02                12/05/02                CBI                    (G) Raw material       (G) Substituted-alkyl-
                                                                                                                                    heteromonocycle
P-02-0984                            09/06/02                12/05/02                Mitsubishi Gas         (S) Epoxy curing       (S) 1,3-
                                                                                      Chemical Company       agent                  benzenedimethanamine
                                                                                      America, Inc.                                 , .nu.-(2-
                                                                                                                                    phenylethyl) derivs.
P-02-0985                            09/06/02                12/05/02                Reichhold, Inc.        (S) Stain vehicle      (G) Vegetable fatty
                                                                                                                                    acids, polymer with
                                                                                                                                    peroxide, alkyl
                                                                                                                                    acrylate, cyclic
                                                                                                                                    carboxlic acid,
                                                                                                                                    alkeneioc acid,
                                                                                                                                    tetra hydroxy alkane
                                                                                                                                    and alkenylbenzene.
P-02-0986                            09/06/02                12/05/02                Reichhold, Inc.        (S) Intermediate       (G) Vegetable fatty
                                                                                                                                    acids, polymer with
                                                                                                                                    peroxide, alkyl
                                                                                                                                    acrylate, alkeneoic
                                                                                                                                    acid and
                                                                                                                                    alkenylbenzene.
P-02-0987                            09/09/02                12/08/02*               CBI                    (G) Use as adhesive    (G) The pmn polymers
                                                                                                             component. non-        is: naphtha
                                                                                                             dispersive use.        (petroleum), light
                                                                                                                                    steam-cracked
                                                                                                                                    debenzenized,
                                                                                                                                    polymers,
                                                                                                                                    hydrogenated
                                                                                                                                    polymers with
                                                                                                                                    carbomonocyclic
                                                                                                                                    diketone.
P-02-0988                            09/10/02                12/09/02                AOC L.L.C.             (S) Reactive           (G) Urethane modified
                                                                                                             copolymer for          acyrlate
                                                                                                             unsaturated
                                                                                                             polyester resin for
                                                                                                             use in reinforced
                                                                                                             and non-reinforced
                                                                                                             plastic parts
P-02-0989                            09/10/02                12/09/02                CBI                    (S) Moisture cure      (G) Aliphatic
                                                                                                             coating                polyester
                                                                                                                                    polyurethane polymer
P-02-0991                            09/11/02                12/10/02                CBI                    (G) Moisture curing    (G) Isocyanate
                                                                                                             polyurethane           terminated urethane
                                                                                                             adhesive               polymer
P-02-0992                            09/11/02                12/10/02                CBI                    (G) Dispersing agent   (G) Ethylene oxide-
                                                                                                             [destructive use]      propylene oxide
                                                                                                                                    copolymer allyl
                                                                                                                                    alkyl ether
P-02-0993                            08/28/02                11/26/02                International Flavors  (S) Ingredients for    (S) Oils, persicaria
                                                                                      and Fragrances, Inc.   use in fragrances      odorata
                                                                                                             for soaps,
                                                                                                             detergents, cleaners
                                                                                                             and other household
                                                                                                             products
P-02-1003                            08/29/02                11/27/02                CBI                    (S) Optical plastics;  (S) 2-propenethioic
                                                                                                             coating materials,     acid, 2-methyl-,
                                                                                                                                    s,s'-(thiodi-2,1-
                                                                                                                                    ethanediyl) ester

[[Page 63922]]

 
P-02-1004                            08/29/02                11/27/02                CBI                    (S) Optical plastics;  (S) 2-propenethioic
                                                                                                             coating materials      acid, 2-methyl-,
                                                                                                                                    s,s'(8-methyl-7-oxo-
                                                                                                                                    3,6,10,13-
                                                                                                                                    tetrathiapentadecane-
                                                                                                                                    1,15-diyl) ester
--------------------------------------------------------------------------------------------------------------------------------------------------------

    In Table II of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the 
Notices of Commencement to manufacture received:

                            II. 29 Notices of Commencement From: 08/26/02 to 09/11/02
----------------------------------------------------------------------------------------------------------------
                                                                Commencement/Import
               Case No.                    Received Date               Date                     Chemical
----------------------------------------------------------------------------------------------------------------
P-00-1129                             09/03/02                08/13/02                (S) 4,7-methano-1h-inden-6-
                                                                                       ol, 3a,4,5,6,7,7a-
                                                                                       hexahydro-, butanoate
P-01-0132                             09/10/02                09/05/02                (S) Siloxanes and
                                                                                       silicones, di-me, me
                                                                                       vinyl, vinyl group-
                                                                                       terminated, polymers with
                                                                                       ethylene and me
                                                                                       methacrylate
P-01-0216                             09/10/02                08/28/02                (G) Hydrocarbon resin
P-01-0242                             09/05/02                08/22/02                (S) Iodonium, (3-
                                                                                       methylphenyl)phenyl-, ar'-
                                                                                       C12-13-branched alkyl
                                                                                       derivs., (oc-6-11)-
                                                                                       hexafluoroantimonates(1-)
P-01-0249                             08/26/02                08/21/02                (S) Boric acid (h3bo3),
                                                                                       mixed 2-[2-(2-
                                                                                       methoxyethoxy)ethoxy]ethy
                                                                                       l and 3,6,9,12-
                                                                                       tetraoxatridec-1-yl
                                                                                       triesters
P-02-0104                             09/05/02                08/06/02                (G) Modified polyester
P-02-0253                             08/27/02                05/17/02                (G) Substituted alkyl
                                                                                       acrylate
P-02-0288                             09/04/02                08/05/02                (G) Alkoxylated fatty acid
                                                                                       esters
P-02-0338                             08/26/02                08/10/02                (G) Copper azo dye
P-02-0343                             08/27/02                07/22/02                (G) Aromatic acid diesters
P-02-0394                             08/30/02                08/01/02                (G) Arylsulfonium compound
P-02-0407                             09/10/02                08/20/02                (G) Urethane acrylate
P-02-0518                             09/09/02                08/21/02                (G) Blocked aromatic
                                                                                       isocyanate
P-02-0555                             09/10/02                07/23/02                (S) Amides, from branched
                                                                                       and linear C16-18 and C18-
                                                                                       unsaturated fatty acids
                                                                                       and 1-
                                                                                       piperazineethanamine
P-02-0556                             09/10/02                07/24/02                (S) Fatty acids, C16-18
                                                                                       and C18-unsaturated,
                                                                                       branched and linear,
                                                                                       reaction products with 2-
                                                                                       [(2-
                                                                                       aminoethyl)amino]ethanol
P-02-0557                             09/10/02                07/25/02                (S) Amides, from branched
                                                                                       and linear C16-18 and C18-
                                                                                       unsaturated fatty acids
                                                                                       and triethylenetetramine
P-02-0558                             09/10/02                07/26/02                (S) Amides, from branched
                                                                                       and linear C16-18 and C18-
                                                                                       unsaturated fatty acids
                                                                                       and pentaethylenehexamine
P-02-0559                             09/10/02                07/29/02                (S) Amides, from branched
                                                                                       and linear C16-18 and C18-
                                                                                       unsaturated fatty acids
                                                                                       and
                                                                                       polyethylenepolyamines
P-02-0560                             09/10/02                07/30/02                (S) Amides, from branched
                                                                                       and linear C16-18 and C18-
                                                                                       unsaturated fatty acids
                                                                                       and
                                                                                       tetraethylenepentamine
P-02-0561                             09/10/02                07/31/02                (S) Fatty acids, C16-18
                                                                                       and C18-unsaturated
                                                                                       branched and linear,
                                                                                       reaction products with
                                                                                       piperazineethanol
P-02-0599                             09/09/02                08/30/02                (G) Blocked artomatic
                                                                                       isocyanate
P-02-0609                             08/30/02                08/08/02                (G) Fluorochemical
                                                                                       urethane
P-02-0626                             09/11/02                08/09/02                (G) Aromatic substituted
                                                                                       diurea
P-02-0627                             08/29/02                08/26/02                (G) Acrylic polymer
P-02-0630                             08/26/02                08/14/02                (G) Modified polyester
                                                                                       resin
P-02-0633                             08/26/02                08/14/02                (G) Modified polyester
                                                                                       resin
P-02-0649                             08/29/02                08/08/02                (G) Aromatic polyester
                                                                                       polyol
P-98-0848                             09/04/02                08/12/02                (S) Silicic acid,
                                                                                       magnesium, strontium
                                                                                       salt, dyprosium, europium
                                                                                       doped
P-98-1030                             08/30/02                08/08/02                (G) Urethane acrylate
----------------------------------------------------------------------------------------------------------------

List of Subjects

    Environmental protection, Chemicals, Premanufacturer notices.

    Dated: October 7, 2002.
Sandra R. Wilkins,
Acting Director, Information Management Division, Office of Pollution 
Prevention and Toxics.
[FR Doc. 02-26306 Filed 10-15-02; 8:45 am]
BILLING CODE 6560-50-S