[Federal Register Volume 67, Number 84 (Wednesday, May 1, 2002)]
[Notices]
[Pages 21797-21798]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 02-10762]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

National Highway Traffic Safety Administration

[Docket No. NHTSA-2002-11846]


Notice of Receipt of Petition for Decision That Nonconforming 
2001-2002 Mercedes Benz SL (Body 230) Passenger Cars Are Eligible for 
Importation

AGENCY: National Highway Traffic Safety Administration, DOT.

ACTION: Notice of receipt of petition for decision that nonconforming 
2001-2002 Mercedes Benz SL (Body 230) passenger cars are eligible for 
importation.

-----------------------------------------------------------------------

SUMMARY: This document announces receipt by the National Highway 
Traffic Safety Administration (NHTSA) of a petition for a decision that 
2001-2002 Mercedes Benz SL (Body 230) passenger cars that were not 
originally manufactured to comply with all applicable Federal motor 
vehicle safety standards are eligible for importation into the United 
States because (1) They are substantially similar to vehicles that were 
originally manufactured for importation into and sale in the United 
States and that were certified by their manufacturer as complying with 
the safety standards, and (2) they are capable of being readily altered 
to conform to the standards.

DATE: The closing date for comments on the petition is May 31, 2002.

ADDRESS: Comments should refer to the docket number and notice number, 
and be submitted to: Docket Management, Room PL-401, 400 Seventh St., 
SW, Washington, DC 20590. [Docket hours are from 9 am to 5 pm].

FOR FURTHER INFORMATION CONTACT: George Entwistle, Office of Vehicle 
Safety Compliance, NHTSA (202-366-5306).

SUPPLEMENTARY INFORMATION:   

Background

    Under 49 U.S.C. 30141(a)(1)(A), a motor vehicle that was not 
originally manufactured to conform to all applicable Federal motor 
vehicle safety standards shall be refused admission into the United 
States unless NHTSA has decided that the motor vehicle is substantially 
similar to a motor vehicle originally manufactured for importation into 
and sale in the United States, certified under 49 U.S.C. 30115, and of 
the same model year as the model of the motor vehicle to be compared, 
and is capable of being readily altered to conform to all applicable 
Federal motor vehicle safety standards.
    Petitions for eligibility decisions may be submitted by either 
manufacturers or importers who have registered with NHTSA pursuant to 
49 CFR part 592. As specified in 49 CFR 593.7, NHTSA publishes notice 
in the Federal Register of each petition that it receives, and affords 
interested persons an opportunity to comment on the petition. At the 
close of the comment period, NHTSA decides, on the basis of the 
petition and any comments that it has received, whether the vehicle is 
eligible for importation. The agency then publishes this decision in 
the Federal Register.
    J.K. Technologies, L.L.C. of Baltimore, Maryland (``J.K.'') 
(Registered Importer 90-006) has petitioned NHTSA to decide whether 
2001-2002 Mercedes Benz SL (Body 230) passenger cars are eligible for 
importation into the United States. The vehicles which J.K. believes 
are substantially similar are 2001-2002 Mercedes Benz SL (Body 230) 
passenger cars that were manufactured for importation into, and sale 
in, the United States and certified by their manufacturer as conforming 
to all applicable Federal motor vehicle safety standards.
    The petitioner claims that it carefully compared non-U.S. certified 
2001-2002 Mercedes Benz SL (Body 230) passenger cars to their U.S.-
certified counterparts, and found the vehicles to be substantially 
similar with respect to compliance with most Federal motor vehicle 
safety standards.
    J.K. submitted information with its petition intended to 
demonstrate that non-U.S. certified 2001-2002 Mercedes Benz SL (Body 
230) passenger cars, as originally manufactured for sale in Europe, 
conform to many Federal motor vehicle safety standards in the same 
manner as their U.S. certified counterparts, or are capable of being 
readily altered to conform to those standards.
    Specifically, the petitioner claims that non-U.S. certified 2001-
2002 Mercedes Benz SL (Body 230) passenger cars are identical to their 
U.S. certified counterparts with respect to compliance with Standard 
Nos. 102 Transmission Shift Lever Sequence. * * *, 103 Defrosting and 
Defogging Systems, 104 Windshield Wiping and Washing Systems, 105 
Hydraulic Brake Systems, 106 Brake Hoses, 109 New Pneumatic Tires, 113 
Hood Latch Systems, 116 Brake Fluid, 118 Power Window Systems, 124 
Accelerator Control Systems, 135 Passenger Car Brake Systems, 201 
Occupant Protection in Interior Impact, 202 Head Restraints, 204 
Steering Control Rearward Displacement, 205 Glazing Materials, 206 Door 
Locks and Door Retention Components, 207 Seating Systems, 209 Seat Belt 
Assemblies, 210 Seat Belt Assembly Anchorages, 212 Windshield 
Retention, 216 Roof Crush Resistance, 219 Windshield Zone Intrusion, 
301 Fuel System Integrity, and 302 Flammability of Interior Materials.
    In addition, the petitioner claims that the vehicles comply with 
the Bumper Standard found in 49 CFR Part 581.
    The petitioner also contends that the vehicles are capable of being 
readily altered to meet the following standards, in the manner 
indicated:

[[Page 21798]]

    Standard No. 101 Controls and Displays: replacement of the 
instrument cluster and cruise control lever with U.S.-model components.
    Standard No. 108 Lamps, Reflective Devices and Associated 
Equipment: (a) installation of U.S.-model headlamps and front 
sidemarker lamps, and (b) installation of U.S.-model taillamp 
assemblies that incorporate rear sidemarker lamps.
    Standard No. 110 Tire Selection and Rims: installation of a tire 
information placard.
    Standard No. 111 Rearview Mirror: replacement of the passenger side 
rearview mirror with a U.S.-model component.
    Standard No. 114 Theft Protection: reprogramming to activate the 
theft prevention warning system.
    Standard No. 208 Occupant Crash Protection: (a) reprogramming to 
activate the seat belt warning buzzer; (b) inspection of all vehicles 
and replacement of the driver's and passenger's side air bags, knee 
bolsters, control units, sensors, and seat belts with U.S.-model 
components on vehicles that are not already so equipped. Petitioner 
states that the front outboard designated seating positions have 
combination lap and shoulder belts that are self-tensioning and that 
release by means of a single red pushbutton. Petitioner further states 
that the vehicles are equipped with a seat belt warning lamp that is 
identical to the lamp installed on U.S.-certified models.
    Standard No. 214 Side Impact Protection: Inspect vehicles and 
replace any non-complying part with U.S. model parts. The petitioner 
states that the vehicles are equipped with side impact air bags 
identical to those found on U.S.-certified models.
    The petitioner also states that a vehicle identification plate must 
be affixed to the vehicles near the left windshield post and a 
reference and certification label must be affixed in the area of the 
left front door post to meet the requirements of 49 CFR part 565.
    Interested persons are invited to submit comments on the petition 
described above. Comments should refer to the docket number and be 
submitted to: Docket Management, Room PL-401, 400 Seventh St., SW, 
Washington, DC 20590. [Docket hours are from 9 am to 5 pm]. It is 
requested but not required that 10 copies be submitted.
    All comments received before the close of business on the closing 
date indicated above will be considered, and will be available for 
examination in the docket at the above address both before and after 
that date. To the extent possible, comments filed after the closing 
date will also be considered. Notice of final action on the petition 
will be published in the Federal Register pursuant to the authority 
indicated below.

    Authority: 49 U.S.C. 30141(a)(1)(A) and (b)(1); 49 CFR 593.8; 
delegations of authority at 49 CFR 1.50 and 501.8.

    Issued on: April 25, 2002.
Marilynne Jacobs,
Director, Office of Vehicle Safety Compliance.
[FR Doc. 02-10762 Filed 4-30-02; 8:45 am]
BILLING CODE 4910-59-P