[Federal Register Volume 67, Number 53 (Tuesday, March 19, 2002)]
[Notices]
[Pages 12522-12524]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 02-6601]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[A-427-814]


Notice of Amended Final Results of Antidumping Duty 
Administrative Review: Stainless Steel Sheet and Strip in Coils from 
France

AGENCY: Import Administration, International Trade Administration, 
Department of Commerce.

ACTION: Notice of amended final results of antidumping duty 
administrative review of stainless steel sheet and strip in coils from 
France.

-----------------------------------------------------------------------

EFFECTIVE DATE: March 19, 2002.

FOR FURTHER INFORMATION CONTACT: Robert Bolling, AD/CVD Enforcement 
Group III, Office 9, Import Administration, International Trade 
Administration, U.S. Department of Commerce, 14th Street and 
Constitution Avenue, NW, Washington, DC 20230; telephone: (202) 482-
3434.

The Applicable Statute and Regulations

    Unless otherwise indicated, all citations to the Tariff Act of 
1930, as amended (``the Act''), are references to the provisions 
effective January 1, 1995, the effective date of the amendments made to 
the Act by the Uruguay Round Agreements Act (``URAA''). In addition, 
unless otherwise indicated, all citations to the Department's 
regulations are to the regulations codified at 19 CFR part 351 (2001).

Scope of the Review

    For purposes of this administrative review, the products covered 
are certain stainless steel sheet and strip in coils. Stainless steel 
is an alloy steel containing, by weight, 1.2 percent or less of carbon 
and 10.5 percent or more of chromium, with or without other elements. 
The subject sheet and strip is a flat-rolled product in coils that is 
greater than 9.5 mm in width and less than 4.75 mm in thickness, and 
that is annealed or otherwise heat treated and pickled or otherwise 
descaled. The subject sheet and strip may also be further processed 
(e.g., cold-rolled, polished, aluminized, coated, etc.) provided that 
it maintains the specific dimensions of sheet and strip following such 
processing.
    The merchandise subject to this order is currently classifiable in 
the Harmonized Tariff Schedule of the United States (``HTS'') at 
subheadings: 7219.13.0031, 7219.13.0051, 7219.13.0071, 7219.1300.81 
\1\, 7219.14.0030, 7219.14.0065, 7219.14.0090, 7219.32.0005, 
7219.32.0020, 7219.32.0025, 7219.32.0035, 7219.32.0036, 7219.32.0038, 
7219.32.0042, 7219.32.0044, 7219.33.0005, 7219.33.0020, 7219.33.0025, 
7219.33.0035, 7219.33.0036, 7219.33.0038, 7219.33.0042, 7219.33.0044, 
7219.34.0005, 7219.34.0020, 7219.34.0025, 7219.34.0030, 7219.34.0035, 
7219.35.0005, 7219.35.0015, 7219.35.0030, 7219.35.0035, 7219.90.0010, 
7219.90.0020, 7219.90.0025, 7219.90.0060, 7219.90.0080, 7220.12.1000, 
7220.12.5000, 7220.20.1010, 7220.20.1015, 7220.20.1060, 7220.20.1080, 
7220.20.6005, 7220.20.6010, 7220.20.6015, 7220.20.6060, 7220.20.6080, 
7220.20.7005, 7220.20.7010, 7220.20.7015, 7220.20.7060, 7220.20.7080, 
7220.20.8000, 7220.20.9030, 7220.20.9060, 7220.90.0010, 7220.90.0015, 
7220.90.0060, and 7220.90.0080. Although the HTS subheadings are 
provided for convenience and Customs purposes, the Department's written 
description of the merchandise under review is dispositive.
---------------------------------------------------------------------------

    \1\ Due to changes to the HTS numbers in 2001, 7219.13.0030, 
7219.13.0050, 7219.13.0070, and 7219.13.0080 are now 7219.13.0031, 
7219.13.0051, 7219.13.0071, and 7219.13.0081, respectively.
---------------------------------------------------------------------------

    Excluded from the review of this order are the following: (1) Sheet 
and strip that is not annealed or otherwise heat treated and pickled or 
otherwise descaled, (2) sheet and strip that is cut to length, (3) 
plate (i.e., flat-rolled stainless steel products of a thickness of 
4.75 mm or more), (4) flat wire (i.e., cold-rolled sections, with a 
prepared edge, rectangular in shape, of a width of not more than 9.5 
mm), and (5) razor blade steel. Razor blade steel is a flat-rolled 
product of stainless steel, not further worked than cold-rolled (cold-
reduced), in coils, of a width of not more than 23 mm and a thickness 
of 0.266 mm or less, containing, by weight, 12.5 to 14.5 percent 
chromium, and certified at the time of entry to be used in the 
manufacture of razor blades. See Chapter 72 of the HTS, ``Additional 
U.S. Note'' 1(d).
    Flapper valve steel is also excluded from the scope of the order. 
This product is defined as stainless steel strip in coils containing, 
by weight, between 0.37 and 0.43 percent carbon, between 1.15 and 1.35 
percent molybdenum, and between 0.20 and 0.80 percent manganese. This 
steel also contains, by weight, phosphorus of 0.025 percent or less, 
silicon of between 0.20 and 0.50 percent, and sulfur of 0.020 percent 
or less. The product is manufactured by means of vacuum arc remelting, 
with inclusion controls for sulphide of no more than 0.04 percent and 
for oxide of no more than 0.05 percent. Flapper valve steel has a 
tensile strength of between 210 and 300 ksi, yield strength of between 
170 and 270 ksi, plus or minus 8 ksi, and a hardness (Hv) of between 
460 and 590. Flapper valve steel is most commonly used to produce 
specialty flapper valves in compressors.
    Also excluded is a product referred to as suspension foil, a 
specialty steel product used in the manufacture of suspension 
assemblies for computer disk drives. Suspension foil is described as 
302/304 grade or 202 grade stainless steel of a thickness between 14 
and 127 microns, with a thickness tolerance of plus-or-minus 2.01 
microns, and surface glossiness of 200 to 700 percent Gs. Suspension 
foil must be supplied in coil widths of not more than 407 mm, and with 
a mass of 225 kg or less. Roll marks may only be visible on one side, 
with no scratches of measurable depth. The material must exhibit 
residual stresses of 2 mm maximum deflection, and flatness of 1.6 mm 
over 685 mm length.
    Certain stainless steel foil for automotive catalytic converters is 
also excluded from the scope of this order. This stainless steel strip 
in coils is a specialty foil with a thickness of between 20 and 110 
microns used to produce a metallic substrate with a honeycomb structure 
for use in automotive catalytic converters. The steel contains, by 
weight, carbon of no more than 0.030 percent, silicon of no more than 
1.0 percent, manganese of no more than 1.0 percent, chromium of between 
19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of 
no more than 0.045 percent, sulfur of no more than 0.03 percent, 
lanthanum of less than 0.002 or greater than 0.05 percent, and total 
rare earth elements of more than 0.06 percent, with the balance iron.
    Permanent magnet iron-chromium-cobalt alloy stainless strip is also 
excluded from the scope of this order. This ductile stainless steel 
strip contains, by weight, 26 to 30 percent chromium, and 7 to 10 
percent cobalt, with the remainder of iron, in widths 228.6 mm or less, 
and a thickness between 0.127 and 1.270 mm. It exhibits magnetic 
remanence between 9,000 and

[[Page 12523]]

12,000 gauss, and a coercivity of between 50 and 300 oersteds. This 
product is most commonly used in electronic sensors and is currently 
available under proprietary trade names such as ``Arnokrome III.'' \2\
---------------------------------------------------------------------------

    \2\ ``Arnokrome III'' is a trademark of the Arnold Engineering 
Company.
---------------------------------------------------------------------------

    Certain electrical resistance alloy steel is also excluded from the 
scope of this order. This product is defined as a non-magnetic 
stainless steel manufactured to American Society of Testing and 
Materials (ASTM) specification B344 and containing, by weight, 36 
percent nickel, 18 percent chromium, and 46 percent iron, and is most 
notable for its resistance to high temperature corrosion. It has a 
melting point of 1390 degrees Celsius and displays a creep rupture 
limit of 4 kilograms per square millimeter at 1000 degrees Celsius. 
This steel is most commonly used in the production of heating ribbons 
for circuit breakers and industrial furnaces, and in rheostats for 
railway locomotives. The product is currently available under 
proprietary trade names such as ``Gilphy 36.'' \3\
---------------------------------------------------------------------------

    \3\ ``Gilphy 36'' is a trademark of Imphy, S.A.
---------------------------------------------------------------------------

    Certain martensitic precipitation-hardenable stainless steel is 
also excluded from the scope of this order. This high-strength, ductile 
stainless steel product is designated under the Unified Numbering 
System (UNS) as S45500-grade steel, and contains, by weight, 11 to 13 
percent chromium, and 7 to 10 percent nickel. Carbon, manganese, 
silicon and molybdenum each comprise, by weight, 0.05 percent or less, 
with phosphorus and sulfur each comprising, by weight, 0.03 percent or 
less. This steel has copper, niobium, and titanium added to achieve 
aging, and will exhibit yield strengths as high as 1700 Mpa and 
ultimate tensile strengths as high as 1750 Mpa after aging, with 
elongation percentages of 3 percent or less in 50 mm. It is generally 
provided in thicknesses between 0.635 and 0.787 mm, and in widths of 
25.4 mm. This product is most commonly used in the manufacture of 
television tubes and is currently available under proprietary trade 
names such as ``Durphynox 17.'' \4\
---------------------------------------------------------------------------

    \4\ ``Durphynox 17'' is a trademark of Imphy, S.A.
---------------------------------------------------------------------------

    Finally, three specialty stainless steels typically used in certain 
industrial blades and surgical and medical instruments are also 
excluded from the scope of this order. These include stainless steel 
strip in coils used in the production of textile cutting tools (e.g., 
carpet knives).\5\ This steel is similar to AISI grade 420 but 
containing, by weight, 0.5 to 0.7 percent of molybdenum. The steel also 
contains, by weight, carbon of between 1.0 and 1.1 percent, sulfur of 
0.020 percent or less, and includes between 0.20 and 0.30 percent 
copper and between 0.20 and 0.50 percent cobalt. This steel is sold 
under proprietary names such as ``GIN4 Mo.'' The second excluded 
stainless steel strip in coils is similar to AISI 420-J2 and contains, 
by weight, carbon of between 0.62 and 0.70 percent, silicon of between 
0.20 and 0.50 percent, manganese of between 0.45 and 0.80 percent, 
phosphorus of no more than 0.025 percent and sulfur of no more than 
0.020 percent. This steel has a carbide density on average of 100 
carbide particles per 100 square microns. An example of this product is 
``GIN5'' steel. The third specialty steel has a chemical composition 
similar to AISI 420 F, with carbon of between 0.37 and 0.43 percent, 
molybdenum of between 1.15 and 1.35 percent, but lower manganese of 
between 0.20 and 0.80 percent, phosphorus of no more than 0.025 
percent, silicon of between 0.20 and 0.50 percent, and sulfur of no 
more than 0.020 percent. This product is supplied with a hardness of 
more than Hv 500 guaranteed after customer processing, and is supplied 
as, for example, ``GIN6''.\6\
---------------------------------------------------------------------------

    \5\ This list of uses is illustrative and provided for 
descriptive purposes only.
    \6\ ``GIN4 Mo,'' ``GIN5'' and ``GIN6'' are the proprietary 
grades of Hitachi Metals America, Ltd.
---------------------------------------------------------------------------

Amendment of Final Results

    On February 12, 2002, the Department of Commerce (``the 
Department'') issued its final results for stainless steel sheet and 
strip in coils from France for the January 4, 1999 through June 30, 
2000 period of review. See Stainless Steel Sheet and Strip From France; 
Final Results of Antidumping Duty Administrative Review (``Final 
Results''), 67 FR 6493 (February 12, 2002).
    On February 12, 2002, respondent Ugine, S.A. (``Ugine'') timely 
filed an allegation that the Department made ministerial errors in the 
final results, pursuant to 19 CFR 351.224(c). Petitioners did not 
submit any comments in reply to this ministerial error allegation.

Ugine's Allegation of Ministerial Errors by the Department

    Ugine contends that the Department, in its Final Results, 
inadvertently used the wrong indirect expenses to calculate the 
commission offset. Specifically, the offset was calculated using the 
amount of indirect selling expenses in the United States incurred in 
connection with the matched U.S. sales. According to Ugine, this 
results in double-counting of those selling expenses, since they had 
already been deducted in calculating the constructed export price.
    Ugine also argues that the Department understated the total amount 
of the entered value of the reported U.S. sales by a factor of 2.2046 
when it multiplied the per-unit U.S. entered value amount by U.S. sales 
quantity to obtain the denominators in its assessments rate calculation 
of each importer. Specifically, the Department failed to convert the 
entered value of the subject merchandise to dollars per kilogram. 
Petitioners did not comment on either of these issues.

Department's Position

    We agree with Ugine on both points. Our Final Results determined 
that, for those home market sales matched to U.S. sales where no 
commission was paid, home market commissions should be offset by 
indirect selling expenses. We agree with the respondent that our Final 
Results erroneously applied the incorrect indirect expenses to 
calculate the commission offset. Our Final Results erroneously applied 
the indirect selling expenses incurred in the United States to 
calculate the commission offset. We have changed our margin program 
calculation and corrected this error by applying the indirect selling 
expenses incurred in the country of manufacture.
    In our Final Results we calculated assessment rates for each 
importer. However, our Final Results erroneously underestimated the 
total amount of the entered value by not converting the entered value 
of the subject merchandise to dollars per kilogram. We agree with Ugine 
that in the assessment rate portion of calculation, we should have 
converted the entered value amount by U.S. sales quantity to obtain a 
denominator in dollars per kilogram. Accordingly, we have applied the 
correct exchange rate and have calculated the entered value in dollars 
per kilogram.
    Therefore, we are amending the final results of the antidumping 
duty administrative review of stainless steel sheet and strip in coils 
from France to reflect the correction of the above-cited ministerial 
error. The weighted-average dumping margin is as follows:

------------------------------------------------------------------------
                                                                Amended
                                                      Final      final
                                                    weighted-   weighted
          Producer/manufacturer exporter             average    average
                                                      margin     margin
                                                    (percent)  (percent)
------------------------------------------------------------------------
Ugine, S.A........................................       3.11       3.00
------------------------------------------------------------------------


[[Page 12524]]

    We are issuing and publishing this determination and notice in 
accordance with sections 751(a)(1) and 777(i) of the Act.

    Dated: March 11, 2002.
Faryar Shirzad,
Assistant Secretary for Import Administration.
[FR Doc. 02-6601 Filed 3-18-02; 8:45 am]
BILLING CODE 3510-DS-P