[Federal Register Volume 67, Number 11 (Wednesday, January 16, 2002)]
[Notices]
[Pages 2194-2196]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 02-1128]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[A-580-834]


Notice of Amended Final Antidumping Duty Administrative Review: 
Stainless Steel Sheet and Strip in Coils From the Republic of Korea

AGENCY: Import Administration, International Trade Administration, 
Department of Commerce.

ACTION: Notice of amended final results of antidumping duty 
administrative review of stainless steel sheet and strip in coils from 
the Republic of Korea.

-----------------------------------------------------------------------

EFFECTIVE DATE: January 16, 2002.

FOR FURTHER INFORMATION CONTACT: Brandon Farlander and Laurel LaCivita, 
AD/CVD Enforcement Group III, Office 9, Import Administration, 
International Trade Administration, U.S. Department of Commerce, 14th 
Street and Constitution Avenue, NW., Washington, DC 20230; telephone: 
(202) 482-0182 and (202) 482-4243, respectively.

The Applicable Statute and Regulations

    Unless otherwise indicated, all citations to the Tariff Act of 
1930, as amended (``the Act''), are references to the provisions 
effective January 1, 1995, the effective date of the amendments made to 
the Act by the Uruguay Round Agreements Act (``URAA''). In addition, 
unless otherwise indicated, all citations to the Department's 
regulations are to the regulations codified at 19 CFR part 351 (2001).

Scope of the Review

    For purposes of this administrative review, the products covered 
are certain stainless steel sheet and strip in coils. Stainless steel 
is an alloy steel containing, by weight, 1.2 percent or less of carbon 
and 10.5 percent or more of chromium, with or without other elements. 
The subject sheet and strip is a flat-rolled product in coils that is 
greater than 9.5 mm in width and less than 4.75 mm in thickness, and 
that is annealed or otherwise heat treated and pickled or otherwise 
descaled. The subject sheet and strip may also be further processed 
(e.g., cold-rolled, polished, aluminized, coated, etc.) provided that 
it maintains the specific dimensions of sheet and strip following such 
processing.
    The merchandise subject to this review is classified in the 
Harmonized Tariff Schedule of the United States (HTS) at subheadings: 
7219.13.0031, 7219.13.0051, 7219.13.0071, 7219.1300.81,\1\ 
7219.14.0030, 7219.14.0065, 7219.14.0090, 7219.32.0005, 7219.32.0020, 
7219.32.0025, 7219.32.0035, 7219.32.0036, 7219.32.0038, 7219.32.0042, 
7219.32.0044, 7219.33.0005, 7219.33.0020, 7219.33.0025, 7219.33.0035, 
7219.33.0036, 7219.33.0038, 7219.33.0042, 7219.33.0044, 7219.34.0005, 
7219.34.0020, 7219.34.0025, 7219.34.0030, 7219.34.0035, 7219.35.0005, 
7219.35.0015, 7219.35.0030, 7219.35.0035, 7219.90.0010, 7219.90.0020, 
7219.90.0025, 7219.90.0060, 7219.90.0080, 7220.12.1000, 7220.12.5000, 
7220.20.1010, 7220.20.1015, 7220.20.1060, 7220.20.1080, 7220.20.6005, 
7220.20.6010, 7220.20.6015, 7220.20.6060, 7220.20.6080, 7220.20.7005, 
7220.20.7010, 7220.20.7015, 7220.20.7060, 7220.20.7080, 7220.20.8000, 
7220.20.9030, 7220.20.9060, 7220.90.0010, 7220.90.0015, 7220.90.0060, 
and 7220.90.0080. Although the HTS subheadings are provided for 
convenience and Customs purposes, the Department's written description 
of the merchandise under review is dispositive.
---------------------------------------------------------------------------

    \1\ Due to changes to the HTS numbers in 2001, 7219.13.0030, 
7219.13.0050, 7219.13.0070, and 7219.13.0080 are now 7219.13.0031, 
7219.13.0051, 7219.13.0071, and 7219.13.0081, respectively.
---------------------------------------------------------------------------

    Excluded from the scope of this review are the following: (1) Sheet 
and strip that is not annealed or otherwise heat treated and pickled or 
otherwise descaled, (2) sheet and strip that is cut to length, (3) 
plate (i.e., flat-rolled stainless steel products of a thickness of 
4.75 mm or more), (4) flat wire (i.e., cold-rolled sections, with a 
prepared edge, rectangular in shape, of a width of not more than 9.5 
mm), and (5) razor blade steel. Razor blade steel is a flat-rolled 
product of stainless steel, not further worked than cold-rolled (cold-

[[Page 2195]]

reduced), in coils, of a width of not more than 23 mm and a thickness 
of 0.266 mm or less, containing, by weight, 12.5 to 14.5 percent 
chromium, and certified at the time of entry to be used in the 
manufacture of razor blades. See Chapter 72 of the HTS, ``Additional 
U.S. Note'' 1(d).
    In response to comments by interested parties, the Department has 
determined that certain specialty stainless steel products are also 
excluded from the scope of this review. These excluded products are 
described below.
    Flapper valve steel is defined as stainless steel strip in coils 
containing, by weight, between 0.37 and 0.43 percent carbon, between 
1.15 and 1.35 percent molybdenum, and between 0.20 and 0.80 percent 
manganese. This steel also contains, by weight, phosphorus of 0.025 
percent or less, silicon of between 0.20 and 0.50 percent, and sulfur 
of 0.020 percent or less. The product is manufactured by means of 
vacuum arc remelting, with inclusion controls for sulphide of no more 
than 0.04 percent and for oxide of no more than 0.05 percent. Flapper 
valve steel has a tensile strength of between 210 and 300 ksi, yield 
strength of between 170 and 270 ksi, plus or minus 8 ksi, and a 
hardness (Hv) of between 460 and 590. Flapper valve steel is most 
commonly used to produce specialty flapper valves in compressors.
    Also excluded is a product referred to as suspension foil, a 
specialty steel product used in the manufacture of suspension 
assemblies for computer disk drives. Suspension foil is described as 
302/304 grade or 202 grade stainless steel of a thickness between 14 
and 127 microns, with a thickness tolerance of plus-or-minus 2.01 
microns, and surface glossiness of 200 to 700 percent Gs. Suspension 
foil must be supplied in coil widths of not more than 407 mm, and with 
a mass of 225 kg or less. Roll marks may only be visible on one side, 
with no scratches of measurable depth. The material must exhibit 
residual stresses of 2 mm maximum deflection, and flatness of 1.6 mm 
over 685 mm length.
    Certain stainless steel foil for automotive catalytic converters is 
also excluded from the scope of this review. This stainless steel strip 
in coils is a specialty foil with a thickness of between 20 and 110 
microns used to produce a metallic substrate with a honeycomb structure 
for use in automotive catalytic converters. The steel contains, by 
weight, carbon of no more than 0.030 percent, silicon of no more than 
1.0 percent, manganese of no more than 1.0 percent, chromium of between 
19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of 
no more than 0.045 percent, sulfur of no more than 0.03 percent, 
lanthanum of less than 0.002 or greater than 0.05 percent, and total 
rare earth elements of more than 0.06 percent, with the balance iron.
    Permanent magnet iron-chromium-cobalt alloy stainless strip is also 
excluded from the scope of this review. This ductile stainless steel 
strip contains, by weight, 26 to 30 percent chromium, and 7 to 10 
percent cobalt, with the remainder of iron, in widths 228.6 mm or less, 
and a thickness between 0.127 and 1.270 mm. It exhibits magnetic 
remanence between 9,000 and 12,000 gauss, and a coercivity of between 
50 and 300 oersteds. This product is most commonly used in electronic 
sensors and is currently available under proprietary trade names such 
as ``Arnokrome III.''\2\
---------------------------------------------------------------------------

    \2\ ``Arnokrome III'' is a trademark of the Arnold Engineering 
Company.
---------------------------------------------------------------------------

    Certain electrical resistance alloy steel is also excluded from the 
scope of this review. This product is defined as a non-magnetic 
stainless steel manufactured to American Society of Testing and 
Materials (``ASTM'') specification B344 and containing, by weight, 36 
percent nickel, 18 percent chromium, and 46 percent iron, and is most 
notable for its resistance to high temperature corrosion. It has a 
melting point of 1390 degrees Celsius and displays a creep rupture 
limit of 4 kilograms per square millimeter at 1000 degrees Celsius. 
This steel is most commonly used in the production of heating ribbons 
for circuit breakers and industrial furnaces, and in rheostats for 
railway locomotives. The product is currently available under 
proprietary trade names such as ``Gilphy 36.''\3\
---------------------------------------------------------------------------

    \3\ ``Gilphy 36'' is a trademark of Imphy, S.A.
---------------------------------------------------------------------------

    Certain martensitic precipitation-hardenable stainless steel is 
also excluded from the scope of this review. This high-strength, 
ductile stainless steel product is designated under the Unified 
Numbering System (``UNS'') as S45500-grade steel, and contains, by 
weight, 11 to 13 percent chromium, and 7 to 10 percent nickel. Carbon, 
manganese, silicon and molybdenum each comprise, by weight, 0.05 
percent or less, with phosphorus and sulfur each comprising, by weight, 
0.03 percent or less. This steel has copper, niobium, and titanium 
added to achieve aging, and will exhibit yield strengths as high as 
1700 Mpa and ultimate tensile strengths as high as 1750 Mpa after 
aging, with elongation percentages of 3 percent or less in 50 mm. It is 
generally provided in thicknesses between 0.635 and 0.787 mm, and in 
widths of 25.4 mm. This product is most commonly used in the 
manufacture of television tubes and is currently available under 
proprietary trade names such as ``Durphynox 17.'' \4\
---------------------------------------------------------------------------

    \4\ ``Durphynox 17'' is a trademark of Imphy, S.A.
---------------------------------------------------------------------------

    Finally, three specialty stainless steels typically used in certain 
industrial blades and surgical and medical instruments are also 
excluded from the scope of this review. These include stainless steel 
strip in coils used in the production of textile cutting tools (e.g., 
carpet knives).\5\ This steel is similar to AISI grade 420 but 
containing, by weight, 0.5 to 0.7 percent of molybdenum. The steel also 
contains, by weight, carbon of between 1.0 and 1.1 percent, sulfur of 
0.020 percent or less, and includes between 0.20 and 0.30 percent 
copper and between 0.20 and 0.50 percent cobalt. This steel is sold 
under proprietary names such as ``GIN4 Mo.'' The second excluded 
stainless steel strip in coils is similar to AISI 420-J2 and contains, 
by weight, carbon of between 0.62 and 0.70 percent, silicon of between 
0.20 and 0.50 percent, manganese of between 0.45 and 0.80 percent, 
phosphorus of no more than 0.025 percent and sulfur of no more than 
0.020 percent. This steel has a carbide density on average of 100 
carbide particles per 100 square microns. An example of this product is 
``GIN5'' steel. The third specialty steel has a chemical composition 
similar to AISI 420 F, with carbon of between 0.37 and 0.43 percent, 
molybdenum of between 1.15 and 1.35 percent, but lower manganese of 
between 0.20 and 0.80 percent, phosphorus of no more than 0.025 
percent, silicon of between 0.20 and 0.50 percent, and sulfur of no 
more than 0.020 percent. This product is supplied with a hardness of 
more than Hv 500 guaranteed after customer processing, and is supplied 
as, for example, ``GIN6''.\6\
---------------------------------------------------------------------------

    \5\ This list of uses is illustrative and provided for 
descriptive purposes only.
    \6\ ``GIN4 Mo,'' ``GIN5'' and ``GIN6'' are the proprietary 
grades of Hitachi Metals America, Ltd.
---------------------------------------------------------------------------

Amendment of Final Results

    On December 6, 2001, the Department of Commerce (``the 
Department'') issued its final results and partial rescission for 
stainless steel sheet and strip in coils from the Republic of Korea for 
the January 4, 1999 through June 30, 2000 period of review. See 
Stainless Steel Sheet and Strip From the Republic of Korea; Final 
Results and Partial Rescission of Antidumping Duty Administrative 
Review (``Final Results''), 66 FR 64950 (December 17, 2001).

[[Page 2196]]

    On December 13, 2001, respondent Sammi Steel Co., Ltd. (``Sammi'') 
timely filed an allegation that the Department made a ministerial error 
in the final results. Petitioners did not submit any comments in reply 
to this ministerial error allegation.
    The Department is revising the all others rate applied to Sammi in 
the final results in this administrative review of stainless steel 
sheet and strip in coils from the Republic of Korea. Because Sammi did 
not participate in the original investigation and because Sammi had no 
shipments during the period of review, its cash deposit rate is the all 
others rate assigned to this case.

Sammi's Allegation of a Ministerial Error by the Department

    Sammi contends that the Department, in its Final Results, 
erroneously applied the all others rate determined in the original 
investigation to Sammi, a no shipper during the period of review. Sammi 
notes that the Department amended its final determination on August 28, 
2001, revising the all others rate from 12.12 percent to 2.49 percent. 
See Notice of Amendment of Final Determinations of Sales at Less Than 
Fair Value: Stainless Steel Plate in Coils From the Republic of Korea; 
and Stainless Steel Sheet and Strip in Coils From the Republic of Korea 
(``Amended Final Determination''), 66 FR 45279 (August 28, 2001). Sammi 
contends that the Department should amend its Final Results to apply 
the all others rate of 2.49 percent determined in the Amended Final 
Determination to Sammi.
    Sammi notes that the Department's regulations defines a ministerial 
error as an ``error in addition, subtraction, or other arithmetic 
function, clerical error resulting from inaccurate copying, 
duplication, or the like, and any other similar type of unintentional 
error which the Secretary considers ministerial,'' citing 19 CFR 
351.224(f). Therefore, Sammi requests that the Department correct this 
ministerial error by revising Sammi's cash deposit rate and the all 
others rate to 2.49 percent in this administrative review, in 
accordance with the Amended Final Determination.
    Department's Position: We agree with Sammi. Our Final Results 
erroneously stated that the ``all others rate'' applicable to exporters 
or manufacturers who have not been covered in this or any previous 
review conducted by the Department is 12.12 percent rather than the 
2.49 percent established in the Amended Final Determination. The 
correct all others rate applicable to Sammi is the all others rate 
established in the Amended Final Determination. Since Sammi did not 
participate in the original investigation and because Sammi had no 
shipments in the current period of review, its cash deposit rate is the 
all others rate determined in the Amended Final Determination.
    Therefore, we are amending the final results of the antidumping 
duty administrative review of stainless steel sheet and strip in coils 
from the Republic of Korea to reflect the correction of the above-cited 
ministerial error.
    We are issuing and publishing this determination and notice in 
accordance with sections 751(a)(1) and 777(i) of the Act.

    Dated: January 9, 2002.
Faryar Shirzad,
Assistant Secretary for Import Administration.
[FR Doc. 02-1128 Filed 1-15-02; 8:45 am]
BILLING CODE 3510-DS-P