[Federal Register Volume 66, Number 230 (Thursday, November 29, 2001)]
[Notices]
[Pages 59559-59561]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 01-29665]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[A-823-811]


Antidumping Duty Order: Certain Hot-Rolled Carbon Steel Flat 
Products From Ukraine

AGENCY: Import Administration, International Trade Administration, 
Department of Commerce.

ACTION: Notice of antidumping duty order.

-----------------------------------------------------------------------

EFFECTIVE DATE: November 29, 2001.

FOR FURTHER INFORMATION CONTACT: Lori Ellison at 202-482-5811, Import 
Administration, International Trade Administration, U.S. Department of 
Commerce, 1401 Constitution Avenue, NW., Washington, DC 20230.

Applicable Statute and Regulations

    Unless otherwise indicated, all citations to the Tariff Act of 
1930, as amended (``Act''), are references to the provisions effective 
January 1, 1995, the effective date of the amendments made to the Act 
by the Uruguay Round

[[Page 59560]]

Agreements Act. In addition, unless otherwise indicated, all citations 
to the Department's regulations are to the regulations at 19 CFR part 
351 (2000).

Background

    On September 21, 2001, the Department issued its final 
determination in the antidumping duty investigation of hot-rolled steel 
from Ukraine. See Notice of Final Determination of Sales At Less Than 
Fair Value: Certain Hot-Rolled Carbon Steel Flat Products from Ukraine, 
66 FR 50401 (October 3, 2001) (``Final Determination'').
    On November 13, 2001, the International Trade Commission (``ITC'') 
notified the Department of its final determination pursuant to section 
735(b)(1)(A)(i) of the Act that an industry in the United States is 
materially injured by reason of less-than-fair-value imports of subject 
merchandise from Ukraine.

Scope of Investigation

    For purposes of this investigation, the products covered are 
certain hot-rolled carbon steel flat products of a rectangular shape, 
of a width of 0.5 inch or greater, neither clad, plated, nor coated 
with metal and whether or not painted, varnished, or coated with 
plastics or other non-metallic substances, in coils (whether or not in 
successively superimposed layers), regardless of thickness, and in 
straight lengths of a thickness of less than 4.75 mm and of a width 
measuring at least 10 times the thickness. Universal mill plate (i.e., 
flat-rolled products rolled on four faces or in a closed box pass, of a 
width exceeding 150 mm, but not exceeding 1250 mm, and of a thickness 
of not less than 4.0 mm, not in coils and without patterns in relief) 
of a thickness not less than 4.0 mm is not included within the scope of 
this investigation.
    Specifically included within the scope of this investigation are 
vacuum degassed, fully stabilized (commonly referred to as 
interstitial-free (IF)) steels, high strength low alloy (HSLA) steels, 
and the substrate for motor lamination steels. IF steels are recognized 
as low carbon steels with micro-alloying levels of elements such as 
titanium or niobium (also commonly referred to as columbium), or both, 
added to stabilize carbon and nitrogen elements. HSLA steels are 
recognized as steels with micro-alloying levels of elements such as 
chromium, copper, niobium, vanadium, and molybdenum. The substrate for 
motor lamination steels contains micro-alloying levels of elements such 
as silicon and aluminum.
    Steel products to be included in the scope of this investigation, 
regardless of definitions in the Harmonized Tariff Schedule of the 
United States (HTSUS), are products in which: (i) Iron predominates, by 
weight, over each of the other contained elements; (ii) the carbon 
content is 2 percent or less, by weight; and (iii) none of the elements 
listed below exceeds the quantity, by weight, respectively indicated:
    1.80 percent of manganese, or
    2.25 percent of silicon, or
    1.00 percent of copper, or
    0.50 percent of aluminum, or
    1.25 percent of chromium, or
    0.30 percent of cobalt, or
    0.40 percent of lead, or
    1.25 percent of nickel, or
    0.30 percent of tungsten, or
    0.10 percent of molybdenum, or
    0.10 percent of niobium, or
    0.15 percent of vanadium, or
    0.15 percent of zirconium.
    All products that meet the physical and chemical description 
provided above are within the scope of this investigation unless 
otherwise excluded. The following products, by way of example, are 
outside or specifically excluded from the scope of this investigation:
     Alloy hot-rolled steel products in which at least one of 
the chemical elements exceeds those listed above (including, e.g., 
American Society for Testing and Materials (ASTM) specifications A543, 
A387, A514, A517, A506).
     Society of Automotive Engineers (SAE)/American Iron & 
Steel Institute (AISI) grades of series 2300 and higher.
     Ball bearing steels, as defined in the HTSUS.
     Tool steels, as defined in the HTSUS.
     Silico-manganese (as defined in the HTSUS) or silicon 
electrical steel with a silicon level exceeding 2.25 percent.
     ASTM specifications A710 and A736.
     USS abrasion-resistant steels (USS AR 400, USS AR 500).
     All products (proprietary or otherwise) based on an alloy 
ASTM specification (sample specifications: ASTM A506, A507).
     Non-rectangular shapes, not in coils, which are the result 
of having been processed by cutting or stamping and which have assumed 
the character of articles or products classified outside chapter 72 of 
the HTSUS.
    The merchandise subject to this investigation is classified in the 
HTSUS at subheadings: 7208.10.15.00, 7208.10.30.00, 7208.10.60.00, 
7208.25.30.00, 7208.25.60.00, 7208.26.00.30, 7208.26.00.60, 
7208.27.00.30, 7208.27.00.60, 7208.36.00.30, 7208.36.00.60, 
7208.37.00.30, 7208.37.00.60, 7208.38.00.15, 7208.38.00.30, 
7208.38.00.90, 7208.39.00.15, 7208.39.00.30, 7208.39.00.90, 
7208.40.60.30, 7208.40.60.60, 7208.53.00.00, 7208.54.00.00, 
7208.90.00.00, 7211.14.00.90, 7211.19.15.00, 7211.19.20.00, 
7211.19.30.00, 7211.19.45.00, 7211.19.60.00, 7211.19.75.30, 
7211.19.75.60, and 7211.19.75.90. Certain hot-rolled carbon steel flat 
products covered by this investigation, including: Vacuum degassed 
fully stabilized; high strength low alloy; and the substrate for motor 
lamination steel may also enter under the following tariff numbers: 
7225.11.00.00, 7225.19.00.00, 7225.30.30.50, 7225.30.70.00, 
7225.40.70.00, 7225.99.00.90, 7226.11.10.00, 7226.11.90.30, 
7226.11.90.60, 7226.19.10.00, 7226.19.90.00, 7226.91.50.00, 
7226.91.70.00, 7226.91.80.00, and 7226.99.00.00. Subject merchandise 
may also enter under 7210.70.30.00, 7210.90.90.00, 7211.14.00.30, 
7212.40.10.00, 7212.40.50.00, and 7212.50.00.00. Although the HTSUS 
subheadings are provided for convenience and U.S. Customs purposes, the 
written description of the merchandise under investigation is 
dispositive.

Antidumping Duty Order

    In accordance with section 736(a)(1) of the Act, the Department is 
directing Customs officers to assess, upon further advice by the 
Department, antidumping duties equal to the amount by which the normal 
value of the merchandise exceeds the export price (or constructed 
export price) of the merchandise for all relevant entries of hot-rolled 
carbon steel flat products from Ukraine. The antidumping duties will be 
assessed on all unliquidated entries of hot-rolled carbon steel flat 
products from Ukraine entered, or withdrawn from warehouse, for 
consumption on or after May 3, 2001, the date on which the Department 
published its notice of preliminary determination in the Federal 
Register. Customs officers must require, at the same time as importers 
would normally deposit estimated duties on this merchandise, a cash 
deposit equal to the estimated weighted-average antidumping duty 
margins as noted below. The ``Ukraine-Wide'' rate applies to all 
exporters of subject merchandise from Ukraine.

[[Page 59561]]



------------------------------------------------------------------------
                                                              Weighted-
                   Exporter/manufacturer                       average
                                                                margin
------------------------------------------------------------------------
Ukraine-Wide Rate..........................................        90.33
------------------------------------------------------------------------

    This notice constitutes the antidumping duty order with respect to 
hot-rolled carbon steel flat products from Ukraine. Interested parties 
may contact the Department's Central Records Unit, room B-099 of the 
main Department of Commerce building, for copies of an updated list of 
antidumping duty orders currently in effect.
    This order is published in accordance with section 736(a) of the 
Act.

    Dated: November 20, 2001.
Faryar Shirzad,
Assistant Secretary for Import Administration.
[FR Doc. 01-29665 Filed 11-28-01; 8:45 am]
BILLING CODE 3510-DS-P