[Federal Register Volume 66, Number 192 (Wednesday, October 3, 2001)]
[Corrections]
[Page 50504]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: C1-20895]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

40 CFR Part 63

[FRL-7039-4]
RIN 2060-AG27


National Emission Standards for Hazardous Air Pollutants for Boat 
Manufacturing

Correction

    In rule document 01-20895 beginning on page 44218 in the issue of 
Wednesday, August 22, 2001, make the following corrections:


Sec. 63. 5710  [Corrected]

    1. On page 44235, in the second column, in Sec. 63.5710 (c), in the 
sixth line from the bottom, `` PVOP=weighted-average MACT 
model point value for each open molding operation (PVR, 
PVPG, PVCG, PVPVTR, and 
PVPVTG) included in the average, kilograms of HAP per 
megagram of material applied'' should read ``PVOP=weighted-
average MACT model point value for each open molding operation 
(PVR, PVPG, PVCG, PVTR, and 
PVTG) included in the average, kilograms of HAP per megagram 
of material applied ''.


Sec. 63.5779  [Corrected]

    2. On page 44246, in Table 3 to Subpart VVV, in the second column, 
in Sec. 63.5779, ``b. Atomized plus vacumm '' should read ``b. Atomized 
plus vacuum''.

[FR Doc. C1-20895 Filed 10-2-01; 8:45 am]
BILLING CODE 1505-01-D