[Federal Register Volume 66, Number 163 (Wednesday, August 22, 2001)]
[Notices]
[Page 44200]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 01-21169]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration


Advisory Circular 25.1435-1, Hydraulic System Certification Tests 
and Analysis

AGENCY: Federal Aviation Administration (FAA) DOT.

ACTION: Notice of issuance of advisory circular.

-----------------------------------------------------------------------

SUMMARY: This notice announces the issuance of Advisory Circular (AC) 
25.1435-1, Hydraulic System Certification Tests and Analysis. This AC 
provides guidance material for use as an acceptable means, but not the 
only means, of demonstrating compliance with the airworthiness 
standards for transport category airplanes that contain hydraulic 
system requirements. It is not mandatory and does not constitute a 
regulation.

DATES: Advisory Circular 25.1435-1 was issued by the Acting Manager, 
Transport Airplane Directorate, Aircraft Certification Service, ANM-
100, on May 21, 2001.
    How to obtain copies: A paper copy of AC 25.1435-1 may be obtained 
by writing to the U.S. Department of Transportation, Subsequent 
Distribution Office, DOT Warehouse, SVC-121.23, Ardmore East Business 
Center, 3341Q 75th Ave., Landover, MD 20785, telephone 301-322-5377, or 
faxing your request to the warehouse at 301-386-5394. The AC also will 
be available on the Internet at http://www.faa.gov/avr/air/airhome.htm, 
at the link titled ``Advisory Circulars'' under the ``Available 
Information'' down-drop menu.

    Dated: Issued in Renton, Washington, on August 14, 2001.
Ali Bahrami,
Acting Manager, Transport Airplane Directorate, Aircraft Certification 
Service, ANM-100.
[FR Doc. 01-21169 Filed 8-21-01; 8:45 am]
BILLING CODE 4910-13-M