[Federal Register Volume 65, Number 9 (Thursday, January 13, 2000)]
[Corrections]
[Page 2227]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: C9-21119]
Federal Register / Vol. 65, No. 9 / Thursday, January 13, 2000 /
Corrections
[[Page 2227]]
DEPARTMENT OF ENERGY
Office of Energy Efficiency and Renewable Energy
10 CFR Part 431
[Docket No. EE-RM-96-400]
RIN 1904-AA82
Energy Efficiency Program for Certain Commercial and Industrial
Equipment: Test Procedures, Labeling, and Certification Requirements
for Electric Motors
Correction
In rule document 99-21119 beginning on page 54114, in the issue of
Tuesday, October 5, 1999, make the following corrections:
Sec. 431.81 [Corrected]
1. On page 54161, in the second column, in Sec. 431.81, in the
second line, ``[ONE YEAR AFTER PUBLICATION OF THIS RULE IN THE Federal
Register]'' should read ``October 5, 2000''.
Sec. 431.123 [Corrected]
2. On page 54162, in the first column, in Sec. 431.123(a), in the
second line, ``[insert date 30 days after publication in the Federal
Register]'' should read ``November 4, 1999''.
3. On page 54163, in the first column, in Sec. 431.123(f)(2)(i)(B),
in the first line, ``paragraph (f)(2)'' should read ``paragraph
(f)(3)''.
Sec. 431.42 [Corrected]
4. On page 54158, in Sec. 431.42(a), the table is corrected to read
as follows:
----------------------------------------------------------------------------------------------------------------
Nominal Full Load Efficiency
-----------------------------------------------------------------------------
Open Motors (Number of poles) Enclosed Motors (Number of poles)
-----------------------------------------------------------------------------
6 4 2 6 4 2
----------------------------------------------------------------------------------------------------------------
Motor Horsepower/Standard Kilowatt
Equivalent
----------------------------------------------------------------------------------------------------------------
1/.75............................. 80.0 82.5 ........... 80.0 82.5 75.5
1.5/1.1........................... 84.0 84.0 82.5 85.5 84.0 82.5
2/1.5............................. 85.5 84.0 84.0 86.5 84.0 84.0
3/2.2............................. 86.5 86.5 84.0 87.5 87.5 85.5
5/3.7............................. 87.5 87.5 85.5 87.5 87.5 87.5
7.5/5.5........................... 88.5 88.5 87.5 89.5 89.5 88.5
10/7.5............................ 90.2 89.5 88.5 89.5 89.5 89.5
15/11............................. 90.2 91.0 89.5 90.2 91.0 90.2
20/15............................. 91.0 91.0 90.2 90.2 91.0 90.2
25/18.5........................... 91.7 91.7 91.0 91.7 92.4 91.0
30/22............................. 92.4 92.4 91.0 91.7 92.4 91.0
40/30............................. 93.0 93.0 91.7 93.0 93.0 91.7
50/37............................. 93.0 93.0 92.4 93.0 93.0 92.4
60/45............................. 93.6 93.6 93.0 93.6 93.6 93.0
75/55............................. 93.6 94.1 93.0 93.6 94.1 93.0
100/75............................ 94.1 94.1 93.0 94.1 94.5 93.6
125/90............................ 94.1 94.5 93.6 94.1 94.5 94.5
150/110........................... 94.5 95.0 93.6 95.0 95.0 94.5
200/150........................... 94.5 95.0 94.5 95.0 95.0 95.0
----------------------------------------------------------------------------------------------------------------
[FR Doc. C9-21119 Filed 1-12-00; 8:45 am]
BILLING CODE 1505-01-D