[Federal Register Volume 64, Number 143 (Tuesday, July 27, 1999)]
[Notices]
[Pages 40555-40557]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 99-19124]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
[A-412-818, A-583-831 and A-580-834]
Notice of Antidumping Duty Order; Stainless Steel Sheet and Strip
in Coils From United Kingdom, Taiwan and South Korea
AGENCY: Import Administration, International Trade Administration,
Department of Commerce.
ACTION: Notice of Antidumping Duty Orders.
-----------------------------------------------------------------------
EFFECTIVE DATE: July 27, 1999.
FOR FURTHER INFORMATION CONTACT: Rick Johnson, Linda Ludwig or Jim
Doyle, Antidumping and Countervailing Duty Enforcement Group III,
Import Administration, International Trade Administration, U.S.
Department of Commerce, 14th Street and Constitution Avenue, NW,
Washington, DC 20230, at (202) 482-3818, (202) 482-0649 and (202) 483-
0259 respectively.
Applicable Statute and Regulations
Unless otherwise indicated, all citations to the Tariff Act of
1930, as amended (the Tariff Act), are to the provisions effective
January 1, 1995, the effective date of the amendments made to the
Tariff Act by the Uruguay Round Agreements Act (URAA). In addition,
unless otherwise indicated, all citations to the Department of
Commerce's (the Department's) regulations are to the regulations
codified at 19 CFR Part 351 (April 1, 1998).
Scope of the Orders
For purposes of this order, the products covered are certain
stainless steel sheet and strip in coils. Stainless steel is an alloy
steel containing, by weight, 1.2 percent or less of carbon and 10.5
percent or more of chromium, with or without other elements. The
subject sheet and strip is a flat-rolled product in coils that is
greater than 9.5 mm in width and less than 4.75 mm in thickness, and
that is annealed or otherwise heat treated and pickled or otherwise
descaled. The subject sheet and strip may also be further processed
(e.g., cold-rolled, polished, aluminized, coated, etc.) provided that
it maintains the specific dimensions of sheet and strip following such
processing.
The merchandise subject to this order is classified in the
Harmonized Tariff Schedule of the United States (HTS) at subheadings:
7219.13.00.30, 7219.13.00.50, 7219.13.00.70, 7219.13.00.80,
7219.14.00.30, 7219.14.00.65, 7219.14.00.90, 7219.32.00.05,
7219.32.00.20, 7219.32.00.25, 7219.32.00.35, 7219.32.00.36,
7219.32.00.38, 7219.32.00.42, 7219.32.00.44, 7219.33.00.05,
7219.33.00.20, 7219.33.00.25, 7219.33.00.35, 7219.33.00.36,
7219.33.00.38, 7219.33.00.42, 7219.33.00.44, 7219.34.00.05,
7219.34.00.20, 7219.34.00.25, 7219.34.00.30, 7219.34.00.35,
7219.35.00.05, 7219.35.00.15, 7219.35.00.30, 7219.35.00.35,
7219.90.00.10, 7219.90.00.20, 7219.90.00.25, 7219.90.00.60,
7219.90.00.80, 7220.12.10.00, 7220.12.50.00, 7220.20.10.10,
7220.20.10.15, 7220.20.10.60, 7220.20.10.80, 7220.20.60.05,
7220.20.60.10, 7220.20.60.15, 7220.20.60.60, 7220.20.60.80,
7220.20.70.05, 7220.20.70.10, 7220.20.70.15, 7220.20.70.60,
7220.20.70.80, 7220.20.80.00, 7220.20.90.30, 7220.20.90.60,
7220.90.00.10, 7220.90.00.15, 7220.90.00.60, and 7220.90.00.80.
Although the HTS subheadings are provided for convenience and Customs
purposes, the Department's written description of the merchandise under
investigation is dispositive.
Excluded from the scope of this order are the following: (1) sheet
and strip that is not annealed or otherwise heat treated and pickled or
otherwise descaled, (2) sheet and strip that is cut to length, (3)
plate (i.e., flat-rolled stainless steel products of a thickness of
4.75 mm or more), (4) flat wire (i.e., cold-rolled sections, with a
prepared edge, rectangular in shape, of a width of not more than 9.5
mm), and (5) razor blade steel. Razor blade steel is a flat-rolled
product of stainless steel, not further worked than cold-rolled (cold-
reduced), in coils, of a width of not more than 23 mm and a thickness
of 0.266 mm or less, containing, by weight, 12.5 to 14.5 percent
chromium, and certified at the time of entry to be used in the
manufacture of razor blades. See Chapter 72 of the HTS, ``Additional
U.S. Note'' 1(d).
Flapper valve steel is also excluded from the scope of the order.
This product is defined as stainless steel strip in coils containing,
by weight, between 0.37 and 0.43 percent carbon, between 1.15 and 1.35
percent molybdenum, and between 0.20 and 0.80 percent manganese. This
steel also contains, by weight, phosphorus of 0.025 percent or less,
silicon of between 0.20 and 0.50 percent, and sulfur of 0.020 percent
or less. The product is manufactured by means of vacuum arc remelting,
with inclusion controls for sulphide of no more than 0.04 percent and
for oxide of no more than 0.05 percent. Flapper
[[Page 40556]]
valve steel has a tensile strength of between 210 and 300 ksi, yield
strength of between 170 and 270 ksi, plus or minus 8 ksi, and a
hardness (Hv) of between 460 and 590. Flapper valve steel is most
commonly used to produce specialty flapper valves in compressors.
Also excluded is a product referred to as suspension foil, a
specialty steel product used in the manufacture of suspension
assemblies for computer disk drives. Suspension foil is described as
302/304 grade or 202 grade stainless steel of a thickness between 14
and 127 microns, with a thickness tolerance of plus-or-minus 2.01
microns, and surface glossiness of 200 to 700 percent Gs. Suspension
foil must be supplied in coil widths of not more than 407 mm, and with
a mass of 225 kg or less. Roll marks may only be visible on one side,
with no scratches of measurable depth. The material must exhibit
residual stresses of 2 mm maximum deflection, and flatness of 1.6 mm
over 685 mm length.
Certain stainless steel foil for automotive catalytic converters is
also excluded from the scope of this order. This stainless steel strip
in coils is a specialty foil with a thickness of between 20 and 110
microns used to produce a metallic substrate with a honeycomb structure
for use in automotive catalytic converters. The steel contains, by
weight, carbon of no more than 0.030 percent, silicon of no more than
1.0 percent, manganese of no more than 1.0 percent, chromium of between
19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of
no more than 0.045 percent, sulfur of no more than 0.03 percent,
lanthanum of less than 0.002 or greater than 0.05 percent, and total
rare earth elements of more than 0.06 percent, with the balance iron.
Permanent magnet iron-chromium-cobalt alloy stainless strip is also
excluded from the scope of this order. This ductile stainless steel
strip contains, by weight, 26 to 30 percent chromium, and 7 to 10
percent cobalt, with the remainder of iron, in widths 228.6 mm or less,
and a thickness between 0.127 and 1.270 mm. It exhibits magnetic
remanence between 9,000 and 12,000 gauss, and a coercivity of between
50 and 300 oersteds. This product is most commonly used in electronic
sensors and is currently available under proprietary trade names such
as ``Arnokrome III.'' 1
---------------------------------------------------------------------------
\1\ ``Arnokrome III'' is a trademark of the Arnold Engineering
Company.
---------------------------------------------------------------------------
Certain electrical resistance alloy steel is also excluded from the
scope of this order. This product is defined as a non-magnetic
stainless steel manufactured to American Society of Testing and
Materials (ASTM) specification B344 and containing, by weight, 36
percent nickel, 18 percent chromium, and 46 percent iron, and is most
notable for its resistance to high temperature corrosion. It has a
melting point of 1390 degrees Celsius and displays a creep rupture
limit of 4 kilograms per square millimeter at 1000 degrees Celsius.
This steel is most commonly used in the production of heating ribbons
for circuit breakers and industrial furnaces, and in rheostats for
railway locomotives. The product is currently available under
proprietary trade names such as ``Gilphy 36.'' 2
---------------------------------------------------------------------------
\2\ ``Gilphy 36'' is a trademark of Imphy, S.A.
---------------------------------------------------------------------------
Certain martensitic precipitation-hardenable stainless steel is
also excluded from the scope of this order. This high-strength, ductile
stainless steel product is designated under the Unified Numbering
System (UNS) as S45500-grade steel, and contains, by weight, 11 to 13
percent chromium, and 7 to 10 percent nickel. Carbon, manganese,
silicon and molybdenum each comprise, by weight, 0.05 percent or less,
with phosphorus and sulfur each comprising, by weight, 0.03 percent or
less. This steel has copper, niobium, and titanium added to achieve
aging, and will exhibit yield strengths as high as 1700 Mpa and
ultimate tensile strengths as high as 1750 Mpa after aging, with
elongation percentages of 3 percent or less in 50 mm. It is generally
provided in thicknesses between 0.635 and 0.787 mm, and in widths of
25.4 mm. This product is most commonly used in the manufacture of
television tubes and is currently available under proprietary trade
names such as ``Durphynox 17.'' 3
---------------------------------------------------------------------------
\3\ ``Durphynox 17'' is a trademark of Imphy, S.A.
---------------------------------------------------------------------------
Finally, three specialty stainless steels typically used in certain
industrial blades and surgical and medical instruments are also
excluded from the scope of this order. These include stainless steel
strip in coils used in the production of textile cutting tools (e.g.,
carpet knives).4 This steel is similar to AISI grade 420 but
containing, by weight, 0.5 to 0.7 percent of molybdenum. The steel also
contains, by weight, carbon of between 1.0 and 1.1 percent, sulfur of
0.020 percent or less, and includes between 0.20 and 0.30 percent
copper and between 0.20 and 0.50 percent cobalt. This steel is sold
under proprietary names such as ``GIN4 Mo.'' The second excluded
stainless steel strip in coils is similar to AISI 420-J2 and contains,
by weight, carbon of between 0.62 and 0.70 percent, silicon of between
0.20 and 0.50 percent, manganese of between 0.45 and 0.80 percent,
phosphorus of no more than 0.025 percent and sulfur of no more than
0.020 percent. This steel has a carbide density on average of 100
carbide particles per 100 square microns. An example of this product is
``GIN5'' steel. The third specialty steel has a chemical composition
similar to AISI 420 F, with carbon of between 0.37 and 0.43 percent,
molybdenum of between 1.15 and 1.35 percent, but lower manganese of
between 0.20 and 0.80 percent, phosphorus of no more than 0.025
percent, silicon of between 0.20 and 0.50 percent, and sulfur of no
more than 0.020 percent. This product is supplied with a hardness of
more than Hv 500 guaranteed after customer processing, and is supplied
as, for example, ``GIN6''.5
---------------------------------------------------------------------------
\4\ This list of uses is illustrative and provided for
descriptive purposes only.
\5\ ``GIN4 Mo,'' ``GIN5'' and ``GIN6'' are the proprietary
grades of Hitachi Metals America, Ltd.
---------------------------------------------------------------------------
Antidumping Duty Orders
On July 19, 1999, the International Trade Commission (the
Commission) notified the Department of its final determination pursuant
to section 735(b)(1)(A)(i) of the Tariff Act that an industry in the
United States is materially injured by reason of less-than-fair-value
imports of subject merchandise from United Kingdom, Taiwan and South
Korea. Therefore, in accordance with section 736(a)(1) of the Tariff
Act, the Department will direct Customs officers to assess, upon
further advice by the Department, antidumping duties equal to the
amount by which the normal value of the merchandise exceeds the export
price (or constructed export price) of the merchandise for all relevant
entries of stainless steel sheet and strip in coils from United
Kingdom, Taiwan and South Korea. These antidumping duties will be
assessed on all unliquidated entries of stainless steel sheet and strip
in coils from United Kingdom, Taiwan and South Korea entered, or
withdrawn from warehouse, for consumption on or after January 4, 1999,
the date on which the Department published its notices of preliminary
determinations in the Federal Register, 64 FR 85-92, 101-108, 116-124,
137-147 (Jan 4, 1999). On or after the date of publication of this
notice in the Federal Register, Customs officers must require, at the
same time as importers would normally deposit estimated duties, cash
deposits for the subject merchandise equal to the estimated weighted-
average antidumping duty margins as noted below. The ``All Others''
rate applies to all exporters of
[[Page 40557]]
subject stainless steel sheet and strip in coils not specifically
listed. The weighted-average dumping margins are as follows:
------------------------------------------------------------------------
Weighted-
Exporter/manufacturer average margin
(percent)
------------------------------------------------------------------------
United Kingdom..........................................
Avesta Sheffield.................................... 14.84
All Others.......................................... 14.84
Taiwan..................................................
Tung Mung/Ta Chen................................... 14.95
Tung Mung........................................... 14.95
YUSCO/Ta Chen....................................... 34.95
YUSCO............................................... 34.95
Chang Mien.......................................... .0.00
All Others.......................................... 12.61
South Korea.............................................
Pohang Iron & Steel Co., Ltd........................ 12.12
Taihan Electric Wire Co., Ltd....................... 58.79
Inchon Iron & Steel Co., Ltd........................ 0.00
All Others.......................................... 12.12
------------------------------------------------------------------------
This notice constitutes the antidumping duty order with respect to
stainless steel sheet and strip in coils from United Kingdom, Taiwan
and South Korea. Interested parties may contact the Department's
Central Records Unit, room B-099 of the main Commerce building, for
copies of an updated list of antidumping duty orders currently in
effect. This order is published in accordance with section 736(a) of
the Tariff Act of 1930, as amended.
Dated: July 21, 1999.
Bernard T. Carreau,
Acting Assistant Secretary for Import Administration.
[FR Doc. 99-19124 Filed 7-26-99; 8:45 am]
BILLING CODE 3510-DS-P