[Federal Register Volume 63, Number 198 (Wednesday, October 14, 1998)]
[Corrections]
[Page 55175]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: X98-31014]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

40 CFR Part 59

[AD-FRL-6149-7]
RIN 2060-AE55


National Volatile Organic Compound Emission Standards for 
Architectural Coatings

Correction

    In rule document 98-22659 beginning on page 48848, in the issue of 
Friday, September 11, 1998, make the following corrections:

PART 59--[CORRECTED]

    On page 48886, in appendix A to subpart D, the entries in Table 1 
are corrected to read as set forth below.

 Table 1 To Subpart D.--Volatile Organic Compound (VOC), Content Limits
                       for Architectural Coatings
  [Unless otherwise specified, limits are expressed in grams of VOC per
  liter of coating thinned to the manufacturer's maximum recommendation
 excluding the volume of any water, exempt compounds, or colorant added
                             to tint bases.]
------------------------------------------------------------------------
                                           Grams VOC per  Pounds VOC per
            Coating category                   liter         gallon a
------------------------------------------------------------------------
Stains:
    Clear and semitransparent...........             550             4.6
    Opaque..............................             350             2.9
    Low solids..........................            120b            1.0b
Wood preservatives:
    Low solids..........................            120b            1.0b
------------------------------------------------------------------------
a  English units are provided for information only. Compliance will be
  determined based on the VOC content limit, as expressed in metric
  units.
b  Units are grams of VOC per liter (pounds of VOC per gallon) of
  coating, including water and exempt compounds, thinned to the maximum
  thinning recommended by the manufacturer.

BILLING CODE 1505-01-D