[Federal Register Volume 63, Number 123 (Friday, June 26, 1998)]
[Corrections]
[Page 34965]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: X98-10626]



  Federal Register / Vol. 63, No. 123 / Friday, June 26, 1998 / 
Corrections  

[[Page 34965]]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

National Institute of Standards and Technology

15 CFR Part 280

[Docket Number: 970724177-8057-02]
RIN 0693-AB43


Procedures for Implementation of the Fastener Quality Act

Correction

    In rule document 98-9397 beginning on page 18260 in the issue of 
Tuesday, April 14, 1998, make the following corrections:


Sec. 280.2  [Corrected]

    1. On page 18272, in the second column, in Sec. 280.2, in the 
definition of Fastener Quality Assurance System (QAS), paragraph 
(2)(iii), in the ninth line, ``of'' should read ``or''.


Sec. 280.6  [Corrected]

    2. On page 18274, in the first column, in Sec. 280.6(c)(5)(vi), in 
the second line, ``conform'' and ``do not conform'' should read 
``conform'' and ``do not conform''.


Sec. 280.602  [Corrected]

    3. On page 18275, in the second column, in Sec. 280.602(o), in the 
second line, ``FOA'' should read ``FQA''.


Sec. 280.1010  [Corrected]

    4. On page 18278, in the second column, in Sec. 280.1010(b)(3)(vi), 
in the first line, ``authority of'' should read ``authority to''.


Sec. 280.1011  [Corrected]

    5. On page 18280, in the third column, Sec. 280.1011(c)(2)(v) 
should be added above Sec. 280.1011(c)(2)(vi) read as follows:
    ``(v) Be able to communicate effectively, both in writing and 
orally, in the required languages;''
BILLING CODE 1505-01-D