[Federal Register Volume 63, Number 119 (Monday, June 22, 1998)]
[Rules and Regulations]
[Page 33853]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 98-16507]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF THE INTERIOR

Minerals Management Service

30 CFR Parts 202, 216, and 250

RIN 1010-AC23


Royalties on Gas, Gas Analysis Reports, Oil and Gas Production 
Measurement, Surface Commingling, and Security

AGENCY: Mienrals Management Service (MMS), Interior.

ACTION: Final rulemaking; corrections.

-----------------------------------------------------------------------

SUMMARY: MMS published in the Federal Register of May 12, 1998 (63 FR 
26361), a final rule commonly known as the ``GVS rule'' that updated 
production measurement, surface commingling, and security requirements 
and made other amendments. The MMS needs to make several minor 
corrections to the final regulations.

EFFECTIVE DATE: This final rule is effective June 29, 1998.

FOR FURTHER INFORMATION CONTACT:
Kumkum Ray, Engineering and Operations Division at (703) 787-1600.

SUPPLEMENTARY INFORMATION: On May 20, 1998 (63 FR 27677) MMS corrected 
the effective date of the final rule and made two other technical 
corrections to the final rule. As published and subsequently corrected, 
the final regulations still contain several errors which may prove to 
be misleading and are in need of correction.

Corrections of Publication

    Accordingly, the publication on May 12, 1998 of the final 
regulations which were the subject of FR Doc. 98-11803, is corrected as 
follows:


Sec. 250.182  [Corrected]

    1. On page 26372, in the third column, in Sec. 250.182(g), the 
first sentence is corrected to read ``What correction factors must I 
use when proving meters with a mechanical-displacement prover, tank 
prover, or master meter?''
    2. On page 26373, in the second column, in Sec. 250.182(k), the 
word ``hydrogen'' is corrected to read ``hydrocarbon''.


Sec. 250.183  [Corrected]

    3. On page 26373, in the second column Sec. 250.183(b)(1) is 
corrected to read ``Submit a written application to, and obtain 
approval from, the Regional Supervisor before commencing gas production 
or making changes to previously approved measurement procedures.''
    4. On page 26373, in the third column, in Sec. 250.183(b)(7) the 
word ``Btu'' is corrected to read ``(Btu)''.


Sec. 250.184  [Corrected]

    5. On page 26374, in the second column, Sec. 250.184(a)(1) is 
corrected to read ``Submit a written application to, and obtain 
approval from, the Regional supervisor before commencing the 
commingling of production or making changes to previously approved 
commingling applications.''

    Dated: June 15, 1998.
William S. Cook,
Acting Chief, Engineering and Operations Division.
[FR Doc. 98-16507 Filed 6-19-98; 8:45 am]
BILLING CODE 4310-MR-M