Federal Register, Volume 63 Issue 111 (Wednesday, June 10, 1998)

[Federal Register Volume 63, Number 111 (Wednesday, June 10, 1998)]
[Notices]
[Pages 31738-31739]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 98-15386]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration


Export Trade Certificate of Review

ACTION: Notice of issuance of an amended export trade certificate of 
review, Application No. 87-12A004.

-----------------------------------------------------------------------

SUMMARY: The Department of Commerce has issued an amendment to the 
Export Trade Certificate of Review granted to The Association For 
Manufacturing Technology (``AMT'')on May 6, 1998. The Notice of 
issuance of the original Certificate was published in the Federal 
Register on May 22, 1987 (52 FR 19371).

EFFECTIVE DATE: February 5, 1998.

FOR FURTHER INFORMATION CONTACT: Morton Schnabel, Acting Director, 
Office of Export Trading Company Affairs, International Trade 
Administration, (202) 482-5131. This is not a toll-free number.

SUPPLEMENTARY INFORMATION: Title III of the Export Trading Company Act 
of 1982 (15 U.S.C. 4001-21) authorizes the Secretary of Commerce to 
issue Export Trade Certificates of Review. The regulations implementing 
Title III are found at 15 CFR part 325 (1998).
    The Office of Export Trading Company Affairs is issuing this notice 
pursuant to 15 CFR 325.6(b), which requires the Department of Commerce 
to publish a summary of a Certificate in the Federal Register. Under 
Section 305(a) of the Act and 15 CFR 325.11(a), any person aggrieved by 
the Secretary's determination may, within 30 days of the date of this 
notice, bring an action in any appropriate district court of the United 
States to set aside the determination on the ground that the 
determination is erroneous.

Description of Amended Certificate

    Export Trade Certificate of Review No. 87-00004, was originally 
issued to AMT on May 19, 1987 (52 FR 19371, May 22, 1987) and 
subsequently amended on December 11, 1987 (52 FR 48454, December 22, 
1987), January 3, 1989 (54 FR 837, January 10, 1989), April 20, 1989 
(54 19427, May 5, 1989), May 31 1989 (54 24931, June 12, 1989), May 29, 
1990 (55 FR 23576, June 11, 1990), June 7, 1991 (56 FR 28140, June 19, 
1991), November 27, 1991 (56 FR 63932, December 6, 1991), July 20, 1992 
(57 FR 33319, July 28, 1992), May 10, 1994 (59 FR 25614, May 17, 1994), 
December 1, 1995 (61 FR 13152, March 26, 1996), and October 11, 1996 
(61 FR 55616, October 28, 1996).
    AMT's Export Trade Certificate of Review has been amended to:
    1. Add as new ``Members'' of the Certificate within the meaning of 
Sec. 325.2(1) of the Regulations (15 CFR 325.2(1)): Aldridge Grinding 
Machine Co., Huntsville, Alabama; Alliance Automation Systems, 
Rochester, New York; Alliance Manufacturing, Inc., Fond Du Lac, 
Wisconsin; Apex Broaching Systems, Inc., Warren, Michigan; Azon USA, 
Inc., Kalamazoo, Michigan; Defiance Machine & Tool Co., Maryland 
Heights, Missouri; Durant Tool Company, Warwick, Rhode Island; Grob 
Systems, Inc., Bluffton, Ohio; J&S Tool Company, Inc., Livingston, New 
Jersey; Jewett Automation, Inc., Richmond, Virginia; Liberty Precision 
Industries, Rochester, New York; Manufacturing Technology, Inc., 
Ventura, California; Mayfran International, Cleveland, Ohio; Mitts & 
Merrill L.P., Harvard, Illinois; Process Control Automation, Inc., 
Montague, Missouri.
    2. Delete as ``Members'' the following companies: Hobart Laser 
Products; ISI Robotics; Mattison Technologies; Milman Engineering Inc.; 
Modern Machine Works, Inc.; Niagara Falls Grinders; Tenco Industries, 
Inc.
    3. Change the listing of the company name for the current 
``Members'' cited in this paragraph to the new listing cited in 
parenthesis as follows: Command Corporation International (Command 
Tooling Systems LLC); Cone Blanchard Machine Systems (Cone-Blanchard 
Machine Co.); Eaton Leonard Inc. (Eagle Eaton Leonard, Inc.); Gleason 
Corp. (The Gleason Works); Grinding Technology Inc. (GTI Technologies, 
Inc.); Hardinge Brothers, Inc. (Hardinge Inc.); PH Hydraulics & 
Automation, Inc. (PH Group, Inc.); Reynolds Machine & Tool

[[Page 31739]]

Corp. (RMT Technologies); Western Atlas (Unova Inc.).

    Dated: June 4, 1998.
Morton Schnabel,
Director, Office of Export Trading Company Affairs.
[FR Doc. 98-15386 Filed 6-9-98; 8:45 am]
BILLING CODE 3510-DR-P