[Federal Register Volume 62, Number 32 (Tuesday, February 18, 1997)]
[Corrections]
[Page 7298]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: X97-10218]



  Federal Register / Vol. 62, No. 32 / Tuesday, February 18, 1997 / 
Corrections  

[[Page 7298]]



DEPARTMENT OF THE INTERIOR

Minerals Management Service

30 CFR Part 250

RIN 1010-AB99


Training of Lessee and Contractor Employees Engaged in Oil and 
Gas and Sulphur Operations in the Outer Continental Shelf (OCS)

Correction

    In rule document 97-2721 beginning on page 5320, in the issue of 
Wednesday, February 5, 1997, make the following corrections:
    1. On page 5320, in the third column, the subagency name was 
inadvertently omitted and should read as set forth in the heading.
    2. On the same page, in the same column, in the SUMMARY, in the 
first line, ``Their'' should read ``This''.
    3. On page 5321, in the third column, in the last line, 
``environment,'' should read ``environment;''.


Sec. 250.214  [Corrected]

    4. On page 5324, both the ``Well Control Transition'' table and the 
``Production Transition'' table should read as set forth below:

                         Well Control Transition                        
------------------------------------------------------------------------
           If your employees                 Then the employees must    
------------------------------------------------------------------------
A. Completed a basic course on or after  A. Complete an appropriate     
 March 7, 1996 or                         basic course within 2 years to
                                          maintain certification,\1\ or 
B. Completed a basic course before       B. Complete an appropriate     
 March 7, 1996.                           basic course by March 9,      
                                          1998.\2\                      
------------------------------------------------------------------------
\1\ Example A: If the effective date of this regulation is November 1,  
  1996, and your employees completed a basic course in Drilling and     
  Workover/Completion well control on December 9, 1995, your employees  
  must complete a basic Drilling and Workover/Completion well-control   
  course by December 9, 1997.                                           
\2\ Example B: If the effective date of this regulation is November 1,  
  1996, and your employees completed a basic course in Well Servicing   
  [snubbing option] well control on November 15, 1994, your employees   
  must complete a basic course in Well Servicing [snubbing option] by   
  November 1, 1997.                                                     


                          Production Transition                         
------------------------------------------------------------------------
           If your employees                 Then your employees must   
------------------------------------------------------------------------
A. Completed a basic course on or after  A. Complete a basic course     
 September 7, 1995, or                    within 3 years to maintain    
                                          certification, or             
B. Completed a basic course before       B. Complete a basic course by  
 September 7, 1995                        September 7, 1998.            
------------------------------------------------------------------------

Sec. 250.228  [Corrected]

    5. On page 5326, in the second column, in Sec. 250.228(a)(4)(i), in 
the second line, ``three'' should read ``tree''.
    6. On the same page, in the same column, in 
Sec. 250.228(a)(4)(iii), ``recognizes'' should read ``recognize'' and 
``sings'' should read ``signs''.


Sec. 250.229  [Corrected]

    7. On the same page, in the ``Well Control'' table, in the third 
line, ``vales'' should read ``valves''.
    8. On page 5328, in the same table, in entry 33., in the 6th line, 
``hosit'' should read ``hoist''.
    9. On the same page, in the same table, in the same entry, in the 
12th line, ``fulid'' should read ``fluid''.
BILLING CODE 1505-01-D