[Federal Register Volume 61, Number 237 (Monday, December 9, 1996)]
[Corrections]
[Page 64948]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: X96-21209]


-----------------------------------------------------------------------

DEPARTMENT OF ENERGY

Office of Energy Efficiency and Renewable Energy

10 CFR Part 431

[Docket No. EE-RM-96-400]


Energy Efficiency Program for Certain Commercial and Industrial 
Equipment: Test Procedures, Labeling, and Certification Requirements 
for Electric Motors

Correction

    In proposed rule document 96-29048 beginning on page 60440 in the 
issue of Wednesday, November 27, 1996, make the following corrections:
    1. On page 60448, in the second column, in the second full 
paragraph, in the eighth line, insert ``be'' after ``to''.
    2. On page 60466, in the third column and continuing to page 60467, 
in the first column, in Sec. 431.24, paragraph (b)(1)(i)(D) is 
corrected to read as follows:


Sec. 431.24  Units to be tested.

* * * * *
    (b)* * *
    (1)* * *
    (i)* * *
    (D) Each basic model should be expected to have the lowest nominal 
full load efficiency among the basic models with the same rating. In 
any instance where it is impossible for a manufacturer to select basic 
models for testing in accordance with all of these criteria, the 
criteria shall be given priority in the order in which they are listed. 
Within the limits imposed by the criteria, basic models shall be 
selected randomly.
* * * * *
    3. On page 60467, in the first column, in Sec. 431.24(b)(1), the 
paragraph designated ``(iii)'' is correctly designated ``(ii)''.
    4. On page 60467, in the second column, in Sec. 431.24(b)(4)(i)(A), 
in the third line, ``431.24(b)(1)(iii)'' should read 
``431.24(b)(1)(ii)''.

BILLING CODE 1505-01-D