[Federal Register Volume 61, Number 232 (Monday, December 2, 1996)]
[Notices]
[Page 63873]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 96-30592]


=======================================================================
-----------------------------------------------------------------------

NUCLEAR REGULATORY COMMISSION


Inservice Testing Inspection Procedure 73756; Workshops

    The U.S. Nuclear Regulatory Commission (NRC) will conduct four 
public workshops pertaining to the July 27, 1995, revision to NRC 
Inspection Procedure (IP) 73756, ``Inservice Testing of Pumps and 
Valves.'' The workshops will be conducted by the Mechanical Engineering 
Branch, Division of Engineering, Office of Nuclear Reactor Regulation, 
in conjunction with the Regional Offices.
    The workshops will be conducted from 8:30 a.m. to 5:00 p.m. at the 
following locations on the following dates:

January 21, 1997
    Hilton Hotel (block of rooms reserved), 3003 Corporate W Drive, 
Lisle, Illinois 60532, 630-505-0900
    Region III Contact: Andrew Dunlop, 630-829-9726
January 23, 1997
    NRC Region IV Offices, 611 Ryan Plaza Drive, Suite 400, Arlington, 
Texas 76011-8064
    Region IV Contact: Dale A. Powers, 817-860-8195
February 4, 1997
    Valley Forge Hilton, 251 West DeKalb Pike, King of Prussia, PA 
19406, 610-337-1200/800-TRY-VFPA
    Region I Contact: Kenneth Kolaczyk, 610-337-5327
February 6, 1997
    Richard B. Russell Building, Auditorium (Lower Plaza), 75 Spring 
Street, S.W., Atlanta, Georgia 30303, 404-331-3333
    Region II Contact: McKenzie Thomas, 404-331-5599

    The public is invited to submit questions or specific topics for 
discussion at the workshops. Questions or topics should be submitted to 
Patricia Campbell, U.S. Nuclear Regulatory Commission, Mail Stop O7E23, 
Washington, D.C. 20555. For further information, the following 
individuals may be contacted: Patricia Campbell, 301-415-1311; Joseph 
Colaccino, 301-415-2753.
    The agenda of the workshops is as follows:

Public Workshops on Inservice Testing Inspection Procedure 73756

8:30-9:00 a.m.
    Welcoming, Introductions (Regional representatives)
9:00-10:00 a.m.
    Presentation on the content of IP 73756, GL 89-04, Supplement 1, 
NUREG-1482, NUREG/CR-6396 (P. Campbell/J. Colaccino)
10:00-10:15 a.m.
    Break
10:15-10:30 a.m.
    Presentation on Generic Letter 96-05
    Periodic Verification of Motor-Operated Valves
    OM Code Case OMN-1 as an Alternative to Stroke
    Timing MOVs (T. Scarbrough/S. Tingen/Region) 1
---------------------------------------------------------------------------

    \1\ This presentation is narrowly focused to provide a summary 
only and to make the IST engineers aware that the NRC has identified 
an acceptable alternative to the current Code requirements for 
stroke timing MOVs. A more detailed discussion of the generic letter 
will be provided at the Motor-Operated Valve Users' Group Meeting 
tentatively scheduled for February 3, 4, and 5 in Atlanta.
---------------------------------------------------------------------------

10:30-11:00 a.m.
    Presentation on Types of Findings from Recent IST Inspections (J. 
Colaccino--from Symposium paper, updated with any additional 
inspections since July 1996, with assistance from Regional 
representatives)
11:00 a.m.-12:00 Noon
    Questions and Answers Breakout Session (NRR and Regional 
representatives)
Noon-1:00 p.m.
    Lunch Break
1:00-3:00 p.m.
    Questions and Answers Session (Panel of NRR and Regional 
representatives)
3:00-3:15 p.m.
    Break
3:15-5:00 p.m. Questions and Answers Session Continued (Panel)

    Signed at Rockville, Maryland, this 25th day of November, 1996.

    For the Nuclear Regulatory Commission.
Richard H. Wessman,
Chief, Mechanical Engineering Branch, Division of Engineering, Office 
of Nuclear Reactor Regulation.
[FR Doc. 96-30592 Filed 11-29-96; 8:45 am]
BILLING CODE 7590-01-P