[Federal Register Volume 61, Number 201 (Wednesday, October 16, 1996)]
[Proposed Rules]
[Page 53886]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 96-26454]


=======================================================================
-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

40 CFR Parts 64, 70, and 71

[FRL-5636-8]


Compliance Assurance Monitoring

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notification Not to Extend Comment Period.

-----------------------------------------------------------------------

SUMMARY: On August 13, 1996, EPA published a notice of availability of 
a draft regulatory package on the Compliance Assurance Monitoring (CAM) 
rulemaking. In that notice, EPA stated that it would make required 
impact analyses available for review and comment no later than August 
30, 1996. 61 FR 41991. On September 3, 1996, EPA published a correction 
notice stating that no required impact analyses would be made public 
until the CAM rule is promulgated. 61 FR 46418.
    EPA has reconsidered the release of regulatory impact analyses and 
decided to make public for comment the required analyses under the 
Regulatory Flexibility Act concerning the potential impact on small 
entities. That analyses should be available by early November 1996 and 
EPA will at that time make it available and announce through a Federal 
Register notice a 30-day comment period. During that comment period EPA 
will accept comments only on the impact of the draft CAM approach on 
small entities.
    The general public comment period on the latest draft of the CAM 
approach will close on October 15, 1996 as originally specified in the 
August 13, 1996 notice.

FOR FURTHER INFORMATION CONTACT: Peter Westlin, Office of Air Quality 
Planning and Standards, (919) 541-1058.

    Dated: October 10, 1996.
John S. Seitz,
Director, Office of Air Quality Planning and Standards.
[FR Doc. 96-26454 Filed 10-15-96; 8:45 am]
BILLING CODE 6560-50-M