[Federal Register Volume 61, Number 132 (Tuesday, July 9, 1996)]
[Notices]
[Pages 36106-36107]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 96-17419]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration


Proposed Advisory Circular 21-SQC, Use of Statistical Quality 
Control for Product Inspection and Acceptance

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: This notice announces the availability of proposed Advisory 
Circular (AC) 21-SQC, Use of Statistical Quality Control for Product 
Inspection and Acceptance, for review and comments. The proposed AC 21-
SQC provides information and guidance concerning an acceptable means, 
but not the only means, of demonstrating compliance with the 
requirements of the Federal Aviation Regulations Part 21, Certification 
Procedures for Products and Parts.

DATES: Comments submitted must identify the proposed AC 21-SQC project 
number, 94-034, and be received by September 6, 1996.

ADDRESSES: Copies of the proposed AC 21-SQC can be obtained from and 
comments may be returned to the following: Federal Aviation 
Administration, Policy, Evaluation, and Analysis Branch, AIR-230, 
Production and Airworthiness Certification Division, Aircraft 
Certification Service, 800 Independence Avenue, SW., Washington, DC 
20591.

FOR FURTHER INFORMATION CONTACT:
Policy, Evaluation, and Analysis Branch, AIR-230, Production and 
Airworthiness Certification Division, Room 815, Aircraft Certification 
Service, Federal Aviation Administration, 800 Independence Avenue, SW, 
Washington, DC 20591, (202) 267-8361.

[[Page 36107]]

SUPPLEMENTARY INFORMATION:

Background

    The proposed AC 21-SQC provides information and guidance to FAA 
production approval applicants or holders concerning the use of 
statistical quality control (SQC).

Comments Invited

    Interested persons are invited to comment on the proposed AC 21-SQC 
listed in this notice by submitting such written data, views, or 
arguments as they desire to the aforementioned specified address. All 
communications received on or before the closing date for comments 
specified above will be considered by the Director, Aircraft 
Certification Service, before issuing the final AC.
    Comments received on the proposed AC 21-SQC may be examined before 
and after the comment closing date in Room 815, FAA headquarters 
building (FOB-10A), 800 Independence Avenue SW, Washington, DC 20591, 
between 8:30 a.m. and 4:30 p.m.

    Issued in Washington, DC, on July 3, 1996.
Frank P. Paskiewicz,
Acting Manager, Production and Airworthiness Certification Division.
[FR Doc. 96-17419 Filed 7-8-96; 8:45 am]
BILLING CODE 4910-13-M