[Federal Register Volume 61, Number 130 (Friday, July 5, 1996)]
[Rules and Regulations]
[Page 35138]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 96-17003]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Coast Guard
46 CFR Parts 76 and 167
[CGD 95-027]
RIN 2115-AF09
Adoption of Industry Standards; Correction
AGENCY: Coast Guard, DOT.
ACTION: Correction to final rule.
-----------------------------------------------------------------------
SUMMARY: This document contains corrections to the final rule in CGD
95-027, published Thursday, May 23, 1996, at 61 FR 25984. The
regulations affect both inspected and uninspected vessels and relate to
removal or revision of obsolete, unnecessary or excessive regulations
and the adoption of industry consensus standards in place of detailed
regulations.
EFFECTIVE DATE: These amendments are effective on July 5, 1996.
FOR FURTHER INFORMATION CONTACT:
Lieutenant Commander R. K. Butturini, Marine Safety and Environmental
Protection (G-MSE-3), Room 1300, U.S. Coast Guard Headquarters, 2100
Second Street, SW, Washington, DC 20593-0001, (202) 267-2206 or fax
(202) 267-4816.
SUPPLEMENTARY INFORMATION: The final rules that are the subject of
these corrections were published as part of the ongoing Presidential
Regulatory Reform Initiative and affects both inspected and uninspected
commercial vessels. The final rule removes obsolete, unnecessary and
excessive regulations and adopts industry consensus standards in place
of detailed regulations.
Need for Correction
As published, the final rule contains typographical errors that may
prove to be misleading and need correcting.
Correction of Publication
Accordingly, the final rule published on Thursday, May 23, 1996,
[CGD 95-027], at 61 FR 25984 is corrected as follows:
Sec. 56.30-25 [Corrected]
1. On page 26000, in Sec. 56.30-25, paragraph (e) is corrected to
read as follows:
Sec. 56.30-25 Flared, flareless and compression fittings.
* * * * *
(e) For fluid services, other than hydraulic systems, using a
combustible fluid as defined in Sec. 30.10-15 of this chapter and for
fluid services using a flammable fluid as defined in Sec. 30.10-22 of
this chapter, flared fittings must be used; except that flareless
fittings of the nonbite type may be used when the tubing system is of
steel, nickel copper or copper nickel alloy. When using copper or
copper zinc alloy, flared fittings are required. (See also Sec. 56.50-
70 for gasoline fuel systems, Sec. 56.60-75 for diesel fuel systems,
and Sec. 58.25-20 for hydraulic systems for steering gear.)
Sec. 76.05-20 [Corrected]
2. On page 26003, Sec. 76.05-20 is corrected to read as follows:
Sec. 76.05-20 Fixed fire extinguishing systems.
Approved fire extinguishing systems must be installed, as required
by table 76.05-1(a) on all self-propelled vessels and on all barges
with sleeping accommodations for more than six persons. Previously
approved installations may be retained as long as they are maintained
in good condition to the satisfaction of the Officer in Charge, Marine
Inspection.
Sec. 76.20-90 [Corrected]
3. On page 26003, in Sec. 72.20-90, the paragraph designation
``(d)'' is corrected to read ``(c)''.
Sec. 168.15-15 [Corrected]
4. On page 26010, in Sec. 168.15-15, paragraph (a) is corrected to
read as follows:
Sec. 168.15-15 Size.
(a) Sleeping accommodations must be divided into rooms, no one of
which may berth more than six persons. The purpose for which each space
is to be used and the number of persons it may accommodate, must be
marked outside the space.
* * * * *
Sec. 168.15-25 [Corrected]
5. On page 26010, in Sec. 168.15-25, paragraph (a) is corrected to
read as follows:
Sec. 168.15-25 Washrooms.
(a) There must be provided 1 shower for each 10 persons or fraction
thereof and 1 wash basin for each 6 persons or fraction thereof for all
persons who do not occupy rooms to which private or semi-private
facilities are attached.
* * * * *
Dated: June 27, 1996.
Joseph J. Angelo,
Director of Standards, Marine Safety and Environmental Protection.
[FR Doc. 96-17003 Filed 7-3-96; 8:45 am]
BILLING CODE 4910-14-M