[Federal Register Volume 61, Number 124 (Wednesday, June 26, 1996)]
[Rules and Regulations]
[Pages 33044-33045]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 96-16318]



=======================================================================
-----------------------------------------------------------------------

[[Page 33045]]

DEPARTMENT OF TRANSPORTATION

Coast Guard

46 CFR Parts 108, 110, 111, 112, 113, and 161

[CGD 94-108]
RIN 2115-AF24


Electrical Engineering Requirements for Merchant Vessels

AGENCY: Coast Guard, DOT.

ACTION: Correction to interim rule.

-----------------------------------------------------------------------

SUMMARY: This document contains corrections to the interim rule that 
was published June 4, 1996, as part of the President's Regulatory 
Reinvention Initiative. The interim rule amends the Coast Guard's 
electrical engineering regulations.

EFFECTIVE DATE: June 26, 1996.

FOR FURTHER INFORMATION CONTACT:
Mr. Gerald P. Miante, Project Manager, Office of Design and Engineering 
Standards (G-MSE), (202) 267-2206.

SUPPLEMENTARY INFORMATION: 

Background

    The interim rule that is the subject of these corrections amends 
the Coast Guard's electrical engineering regulations to reduce the 
regulatory burden on the marine industry, purge obsolete regulation, 
and replace prescriptive requirements with performance-based 
regulations that incorporate international standards.

Need for Correction

    As published, the interim rule contains typographical errors and 
omissions which may prove to be misleading and are in need of 
correction.

Correction of Publication

    Accordingly, the publication on June 4, 1996, of the interim rule 
at 61 FR 28260, which was the subject of FR Doc. 96-13416, is corrected 
as follows:
    1. On page 28261, in the first column, in the paragraph numbered 
``(3)'', ninth line, remove the number ``45'' and add, in its place, 
the number ``60''.
    2. On page 28263, in the second column, in the paragraph entitled 
``Sec. 111.05-9,'' third line, remove ``E-2'' and add, in its place, 
``E-4''.
    3. On page 28266, in the first column, in the paragraph entitled 
``Sec. 111.75-17,'' twelfth line, remove ``(d)(3)(1)'' and add, in its 
place, ``(d)(3)(i)''.
    4. On the same page, in the first column, in the paragraph entitled 
``Sec. 111.75-17,'' fifteenth line, remove the word ``figure'' and add, 
in its place, the word ``fixture''.
    5. On the same page, in the first column, in the paragraph entitled 
``Sec. 111.75-17,'' sixteenth line, remove ``(d)(3)(1)'' and add, in 
its place, ``(d)(3)(i)''.
    6. On the same page, in the third column, in the paragraph entitled 
``Sec. 111.87-3'', eighth line, after the words ``construction 
standards'', add the words ``or equivalent standards under Sec. 110.20-
1 of this chapter''.
    7. On page 28272, in the list of International Electrotechnical 
Commission standards, in the list of sections affected for IEC 92-101, 
remove ``111.15-1(a)'' and add, in its place, ``110.15-1(a)''.
    8. On page 28276, in the second column, in Sec. 111.05-27, fourth 
line, remove the word ``be'' and add, in its place, the word ``is''.


Sec. 111.10-9  [Corrected]

    9. On page 28277, in the second column, in Sec. 111.10-9, the 
heading should read ``Ship's service supply transformer; two 
required.''


Sec. 111.12-1  [Corrected]

    10. On the same page, in the second column, in Sec. 111.12-1(a), 
third line, remove ``Rules, and'' and add, in its place, ``Rules 
and,''.


Sec. 111.12-5  [Corrected]

    11. On the same page, in the third column, in Sec. 111.12-5, fourth 
line, remove ``Rules, or'' and add, in its place, ``Rules or,''.


Sec. 111.12-7  [Corrected]

    12. On the same page, in the third column, in Sec. 111.12-7, third 
line, remove ``Rules, or'' and add, in its place, ``Rules or,''.


Sec. 111.53  [Corrected]

    13. On page 28279, in the third column, in Sec. 111.53-1(a)(2), 
third line, remove the words ``short circuit'' and add, in its place, 
the word ``short-circuit''.


Sec. 111.54-1  [Corrected]

    14. On page 28280, in the first column, in Sec. 111.54-1(b), fifth 
line, remove the word ``breaks'' and add, in its place, the word 
``breakers''.


Sec. 111.60-23  [Corrected]

    15. On page 28281, in the second column, in Sec. 111.60-23(d), 
third line, after ``article 318'', add ``and table 402-5'' and, in 
Sec. 111.60-23(d), fifth line, after ``IEEE Std 45 may'', add the word 
``not''.


Sec. 111.70-3  [Corrected]

    16. On page 28282, in the first column, in Sec. 111.70-3(d)(2), 
third line, remove the word ``diagram'' and add, in its place, the word 
``diagrams''.
    17. On the same page, in the second column, in the paragraph 
numbered ``97,'' remove the words ``paragraph (c) and the note are 
removed'' and add, in their place, the words ``paragraph (c) is removed 
and the note following paragraph (c) is retained''.


Sec. 111.75-17  [Corrected]

    18. On the same page, in the third column, in Sec. 111.75-17(d)(2), 
fourth line, after ``UL 1104'' add the words ``or an equivalent 
standard under Sec. 110.20-1 of this chapter''.


Sec. 111.77-3  [Corrected]

    19. On page 28283, in the first column, in Sec. 111.77-3, in the 
sixth line, after the word ``standards'' add the words ``or equivalent 
standards under Sec. 110.20-1 of this chapter''.


Sec. 111.87-3  [Corrected]

    20. On the same page, in the third column, in Sec. 111.87-3(a), 
second line, after the word ``standards'' add the words ``or equivalent 
standards under Sec. 100.20-1 of this chapter''.


Sec. 111.99-3  [Corrected]

    21. On page 28284, in the first column, in Sec. 111.99-3, in the 
definition for ``central control panel'', fifth line, remove ``;'' and 
add, in its place, ``.''.


Sec. 111.105-31  [Corrected]

    22. On page 28285, in the first column, in Sec. 111.105-31(e)(2), 
remove the word ``pumps'' and add, in its place, the words ``pump 
motors''.
    23. On the same page, in the second column, in Sec. 111.105-
31(n)(1), third line, remove the word ``Rule'' and add, in its place, 
the word ``Rules''.


Sec. 111.105-40  [Corrected]

    24. On the same page, in the third column, in Sec. 111.105-40, 
remove ``Class 1'', wherever it appears, and add, in its place, ``Class 
I''.


Sec. 113.30-25  [Corrected]

    25. On page 28290, in the first column, in Sec. 113.30-25(h), 
second line, add ``IEC'' before ``IP 67 requirements''.
    26. On page 28293, in the third column, remove ``161.004-2'', 
wherever it appears, and add, in its place, ``161.004-1''.

    Dated: June 20, 1996.
Howard L. Hime,
Acting Director of Standards, Marine Safety and Environmental 
Protection.
[FR Doc. 96-16318 Filed 6-25-96; 8:45 am]
BILLING CODE 4910-14-M