[Federal Register Volume 61, Number 59 (Tuesday, March 26, 1996)]
[Notices]
[Pages 13152-13153]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 96-7299]



-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE
International Trade Administration


Export Trade Certificate of Review

ACTION: Notice of Issuance of an amended Export Trade Certificate of 
Review, Application No. 87-10A004.

-----------------------------------------------------------------------

SUMMARY: On December 1, 1996, the Department of Commerce issued an 
amendment to the Export Trade Certificate of Review granted to the 
Association for Manufacturing Technology (``AMT''). The original 
Certificate was issued on May 19, 1987 (52 FR 19371) and notice of 
issuance was published in the Federal Register on May 22, 1987.

FOR FURTHER INFORMATION CONTACT: W. Dawn Busby, Director, Office of 
Export Trading Company Affairs, International Trade Administration, 
(202) 482-5131. This is not a toll-free number.


[[Page 13153]]

SUPPLEMENTARY INFORMATION: Title III of the Export Trading Company Act 
of l982 (15 U.S.C. Sections 4001-21) authorizes the Secretary of 
Commerce to issue Export Trade Certificates of Review. The regulations 
implementing Title III are found at 15 CFR Part 325 (1993).
    The Office of Export Trading Company Affairs is issuing this notice 
pursuant to 15 CFR 325.6(b), which requires the Department of Commerce 
to publish a summary of a Certificate in the Federal Register. Under 
Section 305(a) of the Act and 15 CFR 325.11(a), any person aggrieved by 
the Secretary's determination may, within 30 days of the date of this 
notice, bring an action in any appropriate district court of the United 
States to set aside the determination on the ground that the 
determination is erroneous.

Description of Amended Certificate

    AMT's Export Trade Certificate of Review has been amended to:
    1. Add each of the following companies as a new ``Member'' of the 
Certificate: Acro Automation Systems, Inc., Milwaukee, Wisconsin; 
Automatic Design Concepts, Bridgeport, Connecticut; Bentz, 
Incorporated, Detroit, Michigan; Capco, Inc., Roanoke, Virginia; 
Creative Automation, Inc., Plymouth, Michigan; Edgetek Machine 
Corporation, Meriden, Connecticut; ESAB L-TEC Cutting Systems, 
Florence, South Carolina; GEC Alsthom Cyril Bath Company, Monroe, North 
Carolina; Grav-i-Flo Corporation, Sturgis, Michigan; Hobart Brothers 
Company, Livermore, California; ISI Robotics, Frazer, Michigan; Jasco 
Tools, Inc., Rochester, New York; Keller Industries, Hollandale, 
Minnesota; K.T. Design & Prototype, Winchester, Virginia; Metalsoft, 
Inc., Santa Ana, California; MHI Machine Tool USA, Inc., Bristol, 
Connecticut (controlling entity: Mitsubishi Heavy Industries of 
America); MHO Corporation, Emeryville, California; Natco/Carlton L.P., 
Richmond, Indiana; OMAX Corporation, Auburn, Washington; Optical Gaging 
Products, Inc., Rochester, New York; Precitech Inc., Keene, New 
Hampshire; RWC Incorporated, Bay City, Michigan; Taurus Products, Inc., 
Sterling Heights, Michigan; Wisconsin Machine Tool Corporation, West 
Allis, Wisconsin.
    2. Delete each of the following companies as a ``Member'' of the 
Certificate: Airlock Manufacturing Company; Autospin, Inc.; Black 
Brothers Co.; Bracker Corporation Pittsburgh; Cammann, Inc.; Curtin 
Hebert Co. Inc.; DEA; DeHoff Incorporated; Ekstrom, Carlson & Company; 
Federal Press Company; Feldmann, Inc.; Grotnes Metalforming Systems, 
Inc.; Hoglund Technology Corporation; IRD Mechanalysis, Inc.; Imperial 
Stamp & Engraving Company; J.A.C.P., Inc.; Kalamazoo Saw Co.; Louis 
Levin & Sons Inc.; Morgan Industries, Inc.; Multipress Division; Rank 
Taylor Hobson Inc.; S-P/Sheffer International, Inc.; Schuler 
Incorporated.
    3. Change the listing of the company name for each current 
``Member'' cited in this paragraph to the new listing cited in this 
paragraph in parenthesis as follows: Cellular Concepts Company 
(Cellular Concepts Co.); Control Laser Corporation (Excel/Control); 
Debur Corporation (Surf/Tran Burlytic Systems Division); S.E. Huffman 
Corporation (Huffman); Katy/CRL, Inc. (CRL Industries, Inc.); Komatsu-
Cybermation (Komatasu Cutting Technologies); Mattison Machine Works 
(Mattison Technologies); Moore Special Tool Co., Inc. (Moore Tool Co.); 
Morey Machinery, Inc. (Morey Machinery Manufacturing Corp.); Niagara 
Machine & Tool Works (Clearing Niagara); Positech Corporation (CM 
Positech); Roberts Machine Corp. (Niagara Falls Grinders); Setco Sales 
company (Setco); Sheffield Schaudt Grinding Systems, Inc. (United 
Grinding Technologies); Whitnon Spindle Division/GMN (Whitnon Spindle 
Division/Setco).
    A copy of the amended Certificate will be kept in the International 
Trade Administration's Freedom of Information Records Inspection 
Facility, Room 4 102, U.S. Department of Commerce, 14th Street and 
Constitution Avenue, N.W., Washington, D.C 20230.

    Dated: March 20, 1996.
W. Dawn Busby,
Director, Office of Export Trading Company Affairs.
[FR Doc. 96-7299 Filed 3-25-96; 8:45 am]
BILLING CODE 3510-DR-P