[Federal Register Volume 61, Number 44 (Tuesday, March 5, 1996)]
[Proposed Rules]
[Pages 8539-8540]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 96-5060]



=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Coast Guard

46 CFR Parts 108, 110, 111, 112, 113, and 161

[CGD 94-108]
RIN 2115-AF24


Electrical Engineering Requirements for Merchant Vessels

AGENCY: Coast Guard, DOT.

ACTION: Correction to proposed rule.

-----------------------------------------------------------------------

SUMMARY: This document contains corrections to the notice of proposed 
rulemaking, which was published Friday, February 2, 1996, as part of 
the President's Regulatory Reinvention Initiative, the proposed rule 
amends the Coast Guard's electrical engineering regulations.

EFFECTIVE DATE: March 5, 1996.

FOR FURTHER INFORMATION CONTACT:
Mr. Gerald P. Miante, Project Manager, or LT(jg) Jacqueline M. Twomey, 
Project Engineer, Design and Engineering Standards Division (G-MMS), 
(202) 267-2206.

SUPPLEMENTARY INFORMATION:

Background

    The notice of proposed rulemaking that is the subject of these 
corrections amends the Coast Guard's electrical engineering regulations 
to reduce the regulatory burden on the marine industry, purge obsolete 
regulations and replaces prescriptive requirements with performance-
based regulations that incorporate international standards.

Need for Correction

    As published, the final rule contains typographical errors and 
omissions which may prove to be misleading and are in need of 
correction.

Correction of Publication

    Accordingly, the publication on February 2, 1996, of the notice of 
proposed rulemaking at 61 FR 4132, which was the subject of FR Doc. 96-
2149, is corrected as follows:
    1. On page 4135, in the first column, in the paragraph entitled 
``Section 111.05-33,'' sixth line, the word ``a'' should be added 
before the word ``current.''
    2. On the same page, in the second column, in the paragraph 
entitled ``Section 111.12-1,'' seventh line, remove the word 
``governor'' and add, in its place, the words ``overspeed device''.
    3. On page 4136, in the first column, in the paragraph entitled 
``Section 111.30-4,'' tenth line, remove the words ``a section'', and 
add in their place the word ``sections''.
    4. On page 4137, in the first column, in the paragraph entitled 
``Section 111.60-3,'' fourth line, ``IEC Publication 352'' should be 
replaced with ``IEC Publication 92-352''.
    5. On page 4146, in the list of Underwriters Laboratories' 
standards, the section affected for UL 62, Flexible Cord and Fixture 
Wire, should read ``111.60-13(a)''.
    6. On page 4153, in the second column, in Sec. 111.60-13(a), fourth 
and fifth lines, remove the words ``NEMA WC 3 and NEMA WC 8'' and add, 
in their place the words, ``NEMA WC 3, NEMA WC 8 or UL 62.''
    7. On page 4159, in the third column, in the paragraph numbered 
``154,'' second line, remove ``(q)'' and add, in its place, ``(g)''.
    8. On page 4161, in the third column, in the paragraph numbered 
``184,'' second and third lines, remove the words ``(g), (h), and (i) 
are revised and paragraph (j) is added'' and add, in their place, the 
words ``(g) and (h) and paragraphs (i) and (j) are added''.
    9. On page 4163, in the first column, in Sec. 113.50-5(g), fourth 
line, add the word ``or'' before ``4X''.
    10. On the same page, in the second column, in the paragraph 
numbered ``201,'' third line, add the words ``paragraph (e) is 
removed;'' before the words ``and Table 1135.50-15'' and after 
Sec. 113.50-15(d) remove the five asterisks.


[[Page 8540]]

    Dated: February 26, 1996.
Joseph J. Angelo,
Director for Standards, Office of Marine Safety, Security and 
Environmental Protection.
[FR Doc. 96-5060 Filed 3-4-96; 8:45 am]
BILLING CODE 4910-14-M