[Federal Register Volume 60, Number 221 (Thursday, November 16, 1995)]
[Notices]
[Pages 57616-57617]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 95-28345]



=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration


Proposed Advisory Circular 21-32A, Control of Products and Parts 
Shipped Prior to Type Certificate Issuance

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: This notice announces the availability of proposed Advisory 
Circular (AC) 21-32A, Control of Products and Parts Shipped Prior to 
Type Certificate Issuance, for review and comments. The proposed AC 21-
32A provides information and guidance concerning an acceptable means, 
but not the only means, of demonstrating compliance with the 
requirements of the Federal Aviation Regulations (FAR) part 21, 
Certification Procedures for Products and Parts.


[[Page 57617]]

DATES: Comments submitted must identify the proposed AC 21-32A, project 
number 94-031, and be received by December 30, 1995.

ADDRESSES: Copies of the proposed AC 21-32A can be obtained from and 
comments may be returned to the following: Federal Aviation 
Administration, Policy and Procedures Branch, AIR-230, Production and 
Airworthiness Certification Division, Aircraft Certification Service, 
800 Independence Avenue, SW., Washington, DC 20591.

FOR FURTHER INFORMATION CONTACT:
Production and Airworthiness Certification Division, Room 815, Aircraft 
Certification Service, Federal Aviation Administration, 800 
Independence Avenue, SW., Washington, DC 20591, (202) 267-8361.

Background

    The proposed AC 21-32A provides information and guidance to FAA 
production approval and approved production inspection system holders 
concerning the control of products and parts shipped prior to the 
insurance of type certificate or supplemental type certificate.

Comments Invited

    Interested persons are invited to comment on the proposed AC 21-32A 
listed in this notice by submitting such written data, or arguments as 
they desire to the aforementioned specified address. All communications 
received on or before the closing date for comments specified above 
will be considered by the Director, Aircraft Certification Service, 
before issuing the final AC.
    Comments received on the proposed AC 21-32A may be examined before 
and after the comment closing date in Room 815, FAA headquarters 
building (FOB-10A), 800 Independence Avenue, SW., Washington, DC 20591, 
between 8:30 a.m. and 4:30 p.m.

    Issued in Washington, DC, on November 9, 1995.
Terry Allen,
Acting Manager, Production and Airworthiness Certification Division.
[FR Doc. 95-28345 Filed 11-15-95; 8:45 am]
BILLING CODE 4910-13-M