[Federal Register Volume 60, Number 201 (Wednesday, October 18, 1995)]
[Notices]
[Pages 53955-53956]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 95-25793]



-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION
National Highway Traffic Safety Administration
[Docket No. 95-62; Notice 2]


Decision That Nonconforming 1993 BMW 525i Passenger Cars Are 
Eligible for Importation

AGENCY: National Highway Traffic Safety Administration (NHTSA), DOT.

ACTION: Notice of decision by NHTSA that nonconforming 1993 BMW 525i 
passenger cars are eligible for importation.

-----------------------------------------------------------------------

SUMMARY: This notice announces the decision by NHTSA that 1993 BMW 525i 
passenger cars not originally manufactured to comply with all 
applicable Federal motor vehicle safety standards are eligible for 
importation into the United States because they are substantially 
similar to a vehicle originally manufactured for importation into and 
sale in the United States and certified by its manufacturer as 
complying with the safety standards (the U.S.-certified version of the 
1993 BMW 525i), and they are capable of being readily altered to 
conform to the standards.

DATES: This decision is effective as of October 18, 1995.

FOR FURTHER INFORMATION CONTACT:
George Entwistle, Office of Vehicle Safety Compliance, NHTSA (202-366-
5306).

SUPPLEMENTARY INFORMATION:

Background

    Under 49 U.S.C. 30141(a)(1)(A) (formerly section 108(c)(3)(A)(i) of 
the National Traffic and Motor Vehicle Safety Act (the Act)), a motor 
vehicle that was not originally manufactured to conform to all 
applicable Federal motor vehicle safety standards shall be refused 
admission into the United States unless NHTSA has decided that the 
motor vehicle is substantially similar to a motor vehicle originally 
manufactured for importation into and sale in the United States, 
certified under 49 U.S.C. 30115 (formerly section 114 of the Act), and 
of the same model year as the model of the motor vehicle to be 
compared, and is capable of being readily altered to conform to all 
applicable Federal motor vehicle safety standards.
    Petitions for eligibility decisions may be submitted by either 
manufacturers or importers who have registered with NHTSA pursuant to 
49 CFR Part 592. As specified in 49 CFR 593.7, NHTSA publishes notice 
in the Federal Register of each petition that it receives, and affords 
interested persons an opportunity to comment on the petition. At the 
close of the comment period, NHTSA decides, on the basis of the 
petition and any comments that it has received, whether the vehicle is 
eligible for importation. The agency then publishes this decision in 
the Federal Register.
    Northern California Diagnostic Laboratories, Inc. of Napa, 
California (Registered Importer R-92-011) petitioned NHTSA to decide 
whether 1993 BMW 525i passenger cars are eligible for importation into 
the United States. NHTSA published notice of the 

[[Page 53956]]
petition on August 10, 1995 (60 FR 40880) to afford an opportunity for 
public comment. The reader is referred to that notice for a thorough 
description of the petition. No comments were received in response to 
the notice. Based on its review of the information submitted by the 
petitioner, NHTSA has decided to grant the petition.

Vehicle Eligibility Number for Subject Vehicles

    The importer of a vehicle admissible under any final decision must 
indicate on the form HS-7 accompanying entry the appropriate vehicle 
eligibility number indicating that the vehicle is eligible for entry. 
VSP-133 is the vehicle eligibility number assigned to vehicles 
admissible under this decision.

Final Decision

    Accordingly, on the basis of the foregoing, NHTSA hereby decides 
that a 1993 BMW 525i not originally manufactured to comply with all 
applicable Federal motor vehicle safety standards is substantially 
similar to a 1993 BMW 525i originally manufactured for importation into 
and sale in the United States and certified under 49 U.S.C. 30115, and 
is capable of being readily altered to conform to all applicable 
Federal motor vehicle safety standards.

    Authority: 49 U.S.C. 30141(a)(1)(A) and (b)(1); 49 CFR 593.8; 
delegations of authority at 49 CFR 1.50 and 501.8.

    Issued on: October 12, 1995.
Marilynne Jacobs,
Director, Office of Vehicle Safety Compliance.
[FR Doc. 95-25793 Filed 10-17-95; 8:45 am]
BILLING CODE 4910-59-M