[Federal Register Volume 60, Number 187 (Wednesday, September 27, 1995)]
[Notices]
[Pages 49829-49830]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 95-23915]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
Export Trade Certificate of Review
ACTION: Notice of Application for an Amendment to an Export Trade
Certificate of Review.
-----------------------------------------------------------------------
SUMMARY: The Office of Export Trading Company Affairs (OETCA),
International Trade Administration, Department of Commerce, has
received an application to amend an Export Trade Certificate of Review.
This notice summarizes the amendment and requests comments relevant to
whether the Certificate should be amended.
FOR FURTHER INFORMATION CONTACT: W. Dawn Busby, Director, Office of
Export Trading Company Affairs, International Trade Administration,
202/482-5131. This is not a toll-free number.
SUPPLEMENTARY INFORMATION: Title III of the Export Trading Company Act
of 1982 (15 U.S.C. Secs. 4001-21) authorizes the Secretary of Commerce
to issue Export Trade Certificates of Review. A Certificate of Review
protects the holder and the members identified in the Certificate from
state and federal government antitrust actions and from private, treble
damage antitrust actions for the export conduct specified in the
Certificate and carried out in compliance with its terms and
conditions. Section 302(b)(1) of the Act and 15 CFR 325.6(a) require
the Secretary to publish a notice in the Federal Register identifying
the applicant and summarizing its proposed export conduct.
Request for Public Comments
Interested parties may submit written comments relevant to the
determination whether the Certificate should be amended. An original
and five (5) copies should be submitted no later than 20 days after the
date of this notice to: Office of Export Trading Company Affairs,
International Trade Administration, Department of Commerce, Room 1800H,
Washington, D.C. 20230. Information submitted by any person is exempt
from disclosure under the Freedom of Information Act (5 U.S.C. 552).
Comments should refer to this application as ``Export Trade Certificate
of Review, application number 87-10A004.''
AMT--The Association For Manufacturing Technology's (``AMT'')
original Export Trade Certificate of Review was issued on May 19, 1987
(52 FR 19371, May 22, 1987) and was previously amended on December 11,
1987 (52 FR 48454, December 22, 1987), January 3, 1989 (54 FR 837,
January 10, 1989), April 20, 1989 (54 FR 19427, May 5, 1989), May 31,
1989 (54 FR 24931, June 12, 1989), May 29, 1990 (55 FR 23576, June 11,
1990), June 7, 1991 (56 FR 28140, June 19, 1991), November 27, 1991 (56
FR 63932, December 6, 1991), July 20, 1992 (57 FR 33319, July 28,
1992), and May 10, 1994 (59 FR 25614, May 17, 1994).
Summary of the Application
Applicant: AMT--The Association For Manufacturing Technology, 7901
Westpark Drive, McLean, Virginia 22102-4269, Contact: Jerome D. Sorkin,
legal counsel, Telephone: (202) 662-5569
Application #: 87-10A004
Date Deemed submitted: September 15, 1995.
Request for Amended Conduct
AMT seeks to amend its Certificate to:
1. Add each of the following companies as a new ``Member'' of the
Certificate: Acro Automation Systems, Inc., Milwaukee, Wisconsin;
Automatic Design Concepts, Bridgeport, Connecticut; Bentz,
Incorporated, Detroit, Michigan; Capco, Inc., Roanoke, Virginia;
Creative Automation, Inc., Plymouth, Michigan; Edgetek Machine
Corporation, Meriden, Connecticut; ESAB L-TEC Cutting Systems,
Florence, South Carolina; GEC Alsthom Cyril Bath Company, Monroe, North
Carolina; Grav-i-Flo Corporation, Sturgis, Michigan; Hobart Brothers
Company, Livermore, California; ISI Robotics, Frazer, Michigan; Jasco
Tools, Inc., Rochester, New York; Keller Industries, Hollandale,
Minnesota; K.T. Design &
[[Page 49830]]
Prototype, Winchester, Virginia; Metalsoft, Inc., Santa Ana,
California; MHI Machine Tool USA, Inc., Bristol, Connecticut
(controlling entity: Mitsubishi Heavy Industries of America); MHO
Corporation, Emeryville, California; Natco/Carlton L.P., Richmond,
Indiana; OMAX Corporation, Auburn, Washington; Optical Gaging Products,
Inc., Rochester, New York; Precitech Inc., Keene, New Hampshire; RWC
Incorporated, Bay City, Michigan; Taurus Products, Inc., Sterling
Heights, Michigan; Wisconsin Machine Tool Corporation, West Allis,
Wisconsin.
2. Delete each of the following companies as a ``Member'' of the
Certificate: Airlock Manufacturing Company; Autospin, Inc.; Black
Brothers Co.; Bracker Corporation Pittsburgh; Cammann, Inc.; Curtin
Hebert Co. Inc.; DEA; DeHoff Incorporated; Ekstrom, Carlson & Company;
Federal Press Company; Feldmann, Inc.; Grotnes Metalforming Systems,
Inc.; Hoglund Technology Corporation; IRD Mechanalysis, Inc.; Imperial
Stamp & Engraving Company; J.A.C.P., Inc.; Kalamazoo Saw Co.; Louis
Levin & Son Inc.; Morgan Industries, Inc.; Multipress Division; Rank
Taylor Hobson Inc.; S-P/Sheffer International, Inc.; Schuler
Incorporated.
3. Change the listing of the company name for each current
``Member'' cited in this paragraph to the new listing cited in this
paragraph in parenthesis as follows: Cellular Concepts Company
(Cellular Concepts Co.); Control Laser Corporation (Excel/Control);
Debur Corporation (Surf/Tran Burlytic Systems Division); S.E. Huffman
Corporation (Huffman); Katy/CRL, Inc. (CRL Industries, Inc.); Komatsu-
Cybermation (Komatasu Cutting Technologies); Mattison Machine Works
(Mattison Technologies); Moore Special Tool Co., Inc. (Moore Tool Co.);
Morey Machinery, Inc. (Morey Machinery Manufacturing Corp.); Niagara
Machine & Tool Works (Clearing Niagara); Positech Corporation (CM
Positech); Roberts Machine Corp. (Niagara Falls Grinders); Setco Sales
Company (Setco); Sheffield Schaudt Grinding Systems, Inc. (United
Grinding Technologies); Whitnon Spindle Division/GMN (Whitnon Spindle
Division/Setco).
Dated: September 19, 1995.
W. Dawn Busby,
Director, Office of Export Trading Company Affairs.
[FR Doc. 95-23915 Filed 9-26-95; 8:45 am]
BILLING CODE 3510-DR-P