[Federal Register Volume 60, Number 117 (Monday, June 19, 1995)]
[Notices]
[Page 32040]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 95-14903]



=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

National Highway Traffic Safety Administration
[Docket No. 95-23; Notice 2]


Decision That Nonconforming 1992 Kenworth T800 Trucks Are 
Eligible for Importation

AGENCY: National Highway Traffic Safety Administration (NHTSA), DOT.

ACTION: Notice of decision by NHTSA that nonconforming 1992 Kenworth 
T800 trucks are eligible for importation.

-----------------------------------------------------------------------

SUMMARY: This notice announces the decision by NHTSA that 1992 Kenworth 
T800 trucks not originally manufactured to comply with all applicable 
Federal motor vehicle safety standards are eligible for importation 
into the United States because they are substantially similar to a 
vehicle originally manufactured for importation into and sale in the 
United States and certified by its manufacturer as complying with the 
safety standards (the U.S.-certified version of the 1992 Kenworth 
T800), and they are capable of being readily altered to conform to the 
standards.

DATE: This decision is effective June 19, 1995.

FOR FURTHER INFORMATION CONTACT:
George Entwistle, Office of Vehicle Safety Compliance, NHTSA (202-366-
5306).

SUPPLEMENTARY INFORMATION: 

Background

    Under 49 U.S.C. 30141(a)(1)(A) (formerly section 108(c)(3)(A)(i) of 
the National Traffic and Motor Vehicle Safety Act (the Act)), a motor 
vehicle that was not originally manufactured to conform to all 
applicable Federal motor vehicle safety standards shall be refused 
admission into the United States unless NHTSA has decided that the 
motor vehicle is substantially similar to a motor vehicle originally 
manufactured for importation into and sale in the United States, 
certified under 49 U.S.C. 30115 (formerly section 114 of the Act), and 
of the same model year as the model of the motor vehicle to be 
compared, and is capable of being readily altered to conform to all 
applicable Federal motor vehicle safety standards.
    Petitions for eligibility decisions may be submitted by either 
manufacturers or importers who have registered with NHTSA pursuant to 
49 CFR part 592. As specified in 49 CFR 593.7, NHTSA publishes notice 
in the Federal Register of each petition that it receives, and affords 
interested persons an opportunity to comment on the petition. At the 
close of the comment period, NHTSA decides, on the basis of the 
petition and any comments that it has received, whether the vehicle is 
eligible for importation. The agency then publishes this decision in 
the Federal Register.
    G&K Automotive Conversion, Inc. of Santa Ana, California 
(Registered Importer R-90-007) petitioned NHTSA to decide whether 1992 
Kenworth T800 trucks are eligible for importation into the United 
States. NHTSA published notice of the petition on April 7, 1995 (60 FR 
17846) to afford an opportunity for public comment. The reader is 
referred to that notice for a thorough description of the petition. No 
comments were received in response to the notice. Based on its review 
of the information submitted by the petitioner, NHTSA has decided to 
grant the petition.

Vehicle Eligibility Number for Subject Vehicles

    The importer of a vehicle admissible under any final decision must 
indicate on the form HS-7 accompanying entry the appropriate vehicle 
eligibility number indicating that the vehicle is eligible for entry. 
VSP-115 is the vehicle eligibility number assigned to vehicles 
admissible under this decision.

Final Determination

    Accordingly, on the basis of the foregoing, NHTSA hereby decides 
that a 1992 Kenworth T800 truck not originally manufactured to comply 
with all applicable Federal motor vehicle safety standards is 
substantially similar to a 1992 Kenworth T800 truck originally 
manufactured for importation into and sale in the United States and 
certified under 49 U.S.C. 30115, and is capable of being readily 
altered to conform to all applicable Federal motor vehicle safety 
standards.

    Authority: 49 U.S.C. 30141(a)(1)(A) and (b)(1); 49 CFR 593.8; 
delegations of authority at 49 CFR 1.50 and 501.8.

    Issued on: June 14, 1995.
Marilynne Jacobs,
Director, Office of Vehicle Safety Compliance.
[FR Doc. 95-14903 Filed 6-16-95; 8:45 am]
BILLING CODE 4910-59-M