[Federal Register Volume 60, Number 88 (Monday, May 8, 1995)]
[Proposed Rules]
[Pages 22539-22540]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 95-11236]



-----------------------------------------------------------------------



Occupational Safety and Health Administration

29 CFR Part 1926


Steel Erection Negotiated Rulemaking Advisory Committee

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Notice of Committee meeting.

-----------------------------------------------------------------------

SUMMARY: Under the provisions of the Federal Advisory Committee Act 
(FACA), notice is hereby given of a meeting of the Steel Erection 
Negotiated Rulemaking Advisory Committee (SENRAC). Notice is also given 
of the location of the meeting. This meeting will be open to the 
public. Information on room numbers will be available in the lobby of 
the designated building. A schedule of additional meetings will be 
provided in a future notice.

DATES: The meeting is scheduled for May 24-26, 1995. The meeting will 
begin at 9:00 a.m. on May 24th.

ADDRESSES: Hyatt Hotel at Dulles Airport--2300 Dulles Corner Boulevard, 
Herndon, VA 22071; telephone (703) 713-1234.

FOR FURTHER INFORMATION CONTACT: Anne Cyr, Acting Director, Office of 
Information and Consumer Affairs, OSHA, U.S. Department of Labor, Room 
N-3647, 200 Constitution Avenue, N.W., Washington, D.C. 20210; 
telephone (202) 219-8151.

SUPPLEMENTARY INFORMATION: On May 11, 1994, OSHA announced that it had 
established the Steel Erection Negotiated Rulemaking Advisory Committee 
(SENRAC)(59 FR 24389) in accordance with the Federal Advisory Committee 
Act (FACA), the Negotiated Rulemaking Act of 1990 (NRA) and section 
7(b) of the Occupational Safety and Health Act (OSH Act) to resolve 
issues associated with the development of a Notice of Proposed 
Rulemaking on Steel Erection. Appointees to the Committee include 
representatives from labor, industry, public interests and government 
agencies.
    SENRAC began negotiations in mid June, 1994, and has met seven 
times since. Initial meetings dealt with procedural matters, including 
schedules, agendas and the establishment of workgroups. The Committee 
established workgroups to address issues on Fall Protection, Allocation 
of Responsibility, Construction Specifications and Scope. During 
subsequent meetings, foundations for negotiations were established and 
additional workgroups were formed. In addition, the resolution of 
issues and the drafting of a revised rule continues.
    All interested parties are invited to attend the Committee meetings 
at the time and place indicated above. No advanced registration is 
required. Seating will be available to the public on a first-come, 
first-served basis. Persons with disabilities, who need special 
accommodations, should contact the Facilitator by May 17, 1995.
    During the meeting, members of the general public may informally 
request permission to address the Committee.
    Minutes of the meetings and materials prepared for the Committee 
will be available for public inspection at the OSHA Docket Office, N-
2625, 200 Constitution Ave., N.W., Washington, D.C. 20210; telephone 
(202) 219-7894. Copies of these materials may be obtained by sending a 
written request to the Facilitator.
    The Facilitator, Philip J. Harter, can be reached at Suite 404, 
2301 M Street, NW, Washington, D.C. 20037; telephone (202) 887-1033, 
FAX (202) 887-1036.

    [[Page 22540]] Authority: This document was prepared under the 
direction of Joseph A. Dear, Assistant Secretary of Labor for 
Occupational Safety and Health, U.S. Department of Labor, 200 
Constitution Avenue, N.W., Washington, D.C. 20210, pursuant to 
section 3 of the Negotiated Rulemaking Act of 1990, 104 Stat. 4969, 
Title 5 U.S.C. 561 et seq.; and Section 7(b) of the Occupational 
Safety and Health Act of 1970, 84 Stat. 1597, Title 29 U.S.C. 656.

    Signed at Washington, D.C., this 3rd day of May, 1995.
Joseph A. Dear,
Assistant Secretary of Labor.
[FR Doc. 95-11236 Filed 5-5-95; 8:45 am]
BILLING CODE 4510-26-P