[Federal Register Volume 59, Number 246 (Friday, December 23, 1994)]
[Unknown Section]
[Page 0]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 94-31592]
[[Page Unknown]]
[Federal Register: December 23, 1994]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Mine Safety and Health Administration
Fee Adjustments for Testing, Evaluation, and Approval of Mining
Products
AGENCY: Mine Safety and Health Administration, Labor.
ACTION: Notice of fee adjustments; Correction.
-----------------------------------------------------------------------
SUMMARY: This notice revises the Mine Safety and Health
Administration's (MSHA) user fees for testing, evaluation, and approval
of certain products manufactured for use in underground mines. These
fees are based on fiscal year 1994 data and reflect changes in approval
processing operations, as well as costs incurred to process approval
actions.
DATES: These fee schedules are effective from January 1, 1995 through
December 31, 1995. Approval applications postmarked before January 1,
1995 will be chargeable under the fee schedules as published on
December 29, 1993.
FOR FURTHER INFORMATION CONTACT:
Peter M. Turcic, Chief, Approval and Certification Center, R.R. 1, Box
251, Triadelphia, West Virginia 26059.
SUPPLEMENTARY INFORMATION: MSHA published a Notice of Fee Adjustments
in the Federal Register on December 9, 1994 (59 FR 63825). This notice
inadvertently omitted text. Rather than publish a correction notice
containing only the omitted text, the Agency is republishing the fee
schedule in its entirety for the convenience of the reader.
In general, MSHA has computed the revised fees based on the cost to
the government to provide testing, evaluation, and approval of products
manufactured for use in underground mines. On May 8, 1987 (52 FR
17506), MSHA published a final rule, 30 CFR Part 5--Fees for Testing,
Evaluation, and Approval of Mining Products, which established the
specific procedures for fee calculation, administration, and revisions.
This revised fee schedule is established in accordance with the
procedures of that rule.
Dated: December 20, 1994.
J. Davitt McAteer,
Assistant Secretary, Mine Safety and Health.
Fee Schedule Effective January 1, 1995
[Based on FY 1994 data]
------------------------------------------------------------------------
Hourly Application
Action title rate Flat rate fee
------------------------------------------------------------------------
30 CFR Part 7--Product Testing by Third Party
------------------------------------------------------------------------
12Approval Evaluations--Battery
Assemblies.......................... 43 ......... 100
12Approval Evaluation--Brattice and
Ventilation Tubing.................. 50 ......... 100
12Approval Evaluation--Multiple-Shot
Blasting Units...................... 43 ......... 100
12Approval Evaluation--Electric Motor
Assemblies\1\....................... 43 ......... 100
12Approval Evaluation--Electric
Cables and Splice Kits.............. 49 ......... 100
14Approval Extension--Batteries
Assemblies.......................... 42 ......... 100
14Approval Extension--Brattice and
Ventilation Tubing.................. 48 ......... 100
14Approval Extension--Multiple-Shot
Blasting Units...................... 42 ......... 100
14Approval Extension--Electric Motor
Assemblies\1\....................... 42 ......... 100
14Approval Extension--Electric Cables
and Splice Kits..................... 48 ......... 100
40Stamped Notification Acceptance
Program (SNAP)...................... ......... 278 ...........
------------------------------------------------------------------------
30 CFR Part 15--Explosives
------------------------------------------------------------------------
12Approval Evaluation\2\............. 47 ......... 100
Permissibility Tests for
Explosives:
Weigh-in..................... ......... 420 ...........
Physical Exam: First size.... ......... 295 ...........
Chemical Analysis............ ......... 1,797 ...........
Air Gap--Minimum Product
Firing Temperature.......... ......... 418 ...........
Air Gap--Room Temperature.... ......... 320 ...........
Pendulum Friction Test....... ......... 148 ...........
Detonation Rate.............. ......... 320 ...........
Gallery Test 7............... ......... 6,760 ...........
Gallery Test 8............... ......... 5,030 ...........
Toxic Gases (Large Chamber).. ......... 732 ...........
Permissibility Tests for Sheathed
Explosives:
Physical Examination......... ......... 128 ...........
Chemical Analysis............ ......... 1,044 ...........
Gallery Test 9............... ......... 1,944 ...........
Gallery Test 10.............. ......... 1,944 ...........
Gallery Test 11.............. ......... 1,944 ...........
Gallery Test 12.............. ......... 1,944 ...........
Drop Test.................... ......... 648 ...........
Temperature Effects/
Detonation.................. ......... 672 ...........
Toxic Gases.................. ......... 580 ...........
14Approval Extension................. 47 ......... 100
------------------------------------------------------------------------
30 CFR Part 18--Electric Motor Driven Equipment and Accessories
------------------------------------------------------------------------
12Approval--Machine Evaluation\2\.... 49 ......... 100
Approval--Machine Testing:
Explosion Test............... 41 ......... ...........
Surface/Temperature Test..... 43 ......... ...........
Impact Test.................. 39 ......... ...........
Thermal Shock Test........... 40 ......... ...........
Product Flame Test........... 48 ......... ...........
12Approval--Instrument (testing
included)........................... 47 ......... 100
14Approval Extension--Machine
Evaluation\2\....................... 48 ......... 100
Approval Extension--Machine
Testing:
Explosion Test............... 41 ......... ...........
Surface/Temperature Test..... 43 ......... ...........
Impact Test.................. 39 ......... ...........
Thermal Shock Test........... 40 ......... ...........
Product Flame Test........... 48 ......... ...........
14Approval Extension--Instruments
(testing included).................. 47 ......... 100
15Acceptance Evaluation\2\........... 46 ......... 100
Acceptance Testing:
Explosion Test............... 41 ......... ...........
Wall Thickness Test.......... 51 ......... ...........
Surface/Temperature Test..... 43 ......... ...........
Impact Test.................. 39 ......... ...........
Thermal Shock Test........... 40 ......... ...........
Product Flame Test........... 48 ......... ...........
Compressibility Test
(asbestos substitutes)...... 51 ......... ...........
16Certification Evaluation\2\........ 41 ......... 100
Certification Testing:
Explosion Test............... 41 ......... ...........
Surface/Temperature Test..... 43 ......... ...........
Impact Test.................. 39 ......... ...........
Thermal Shock Test........... 40 ......... ...........
Product Flame Test........... 48 ......... ...........
17Acceptance Extension\2\............ 46 ......... 100
Product Flame Test........... 48 ......... ...........
18Certification Extension\2\......... 41 ......... 100
Certification Extension Testing:
Explosion Test............... 41 ......... ...........
Surface/Temperature Test..... 43 ......... ...........
Impact Test.................. 39 ......... ...........
Thermal Shock Test........... 40 ......... ...........
Product Flame Test........... 48 ......... ...........
21Field Modification\2\.............. 50 ......... 100
Field Modification Testing:
Explosion Test............... 41 ......... ...........
Impact Test.................. 39 ......... ...........
Thermal Shock Test........... 40 ......... ...........
Product Flame Test........... 48 ......... ...........
Arc Ignition Test............ 51 ......... ...........
23Field Approval..................... ......... 255 ...........
26Permit--Machines\2\................ 47 ......... 100
Permit Testing:
Explosion Test............... 41 ......... ...........
Surface/Temperature Test..... 43 ......... ...........
Impact Test.................. 39 ......... ...........
Thermal Shock Test........... 40 ......... ...........
Product Flame Test........... 48 ......... ...........
26Permit--Instruments (testing
included)........................... 47 ......... 100
30Intrinsic Safety Determination
(testing included).................. 51 ......... 100
31Intrinsic Sagety Determination
Extension (testing included)........ 51 ......... 100
32Simplified Certification\2\........ 43 ......... 100
Simplified Certification Testing:
Simplified Certification
Testing:.................... ......... ......... ...........
Explosion Test............... 41 ......... ...........
Surface/Temperature Test..... 43 ......... ...........
Impact Test.................. 39 ......... ...........
Thermal Shock Test........... 40 ......... ...........
Product Flame Test........... 48 ......... ...........
34Simplified Certification
Extension\2\........................ 40 ......... 100
Simplified Certification
Extension Testing:
Explosion Test............... 41 ......... ...........
Surface/Temperature Test..... 43 ......... ...........
Impact Test.................. 39 ......... ...........
Thermal Shock Test........... 40 ......... ...........
Product Flame Test........... 48 ......... ...........
40Stamped Notification Acceptance
Program (SNAP)...................... ......... 278 ...........
41Longwall Approval\2\............... 49 ......... 100
Longwall Approval Testing:
Explosion Test............... 41 ......... ...........
Thermal Shock Test........... 40 ......... ...........
Impact Test.................. 39 ......... ...........
Product Flame Test........... 48 ......... ...........
Arc Ignition Test............ 51 ......... ...........
42Longwall Approval Extension\2\..... 49 ......... ...........
Longwall Approval Extension
Testing:
Explosion Test............... 41 ......... ...........
Thermal Shock Test........... 40 ......... ...........
Impact Test.................. 39 ......... ...........
Product Flame Test........... 48 ......... ...........
Arc Ignition Test............ 51 ......... ...........
45Shearer Evaluation\2\.............. 50 ......... 100
Shearer Evaluation Testing:
Explosion Test............... 41 ......... ...........
Thermal Shock Test........... 40 ......... ...........
Impact Test.................. 39 ......... ...........
Product Flame Test........... 48 ......... ...........
Arc Ignition Test............ 51 ......... ...........
46Shearer Evaluation Extension\2\.... 50 ......... 100
Shearer Evaluation Extension
Testing:
Explosion Test............... 41 ......... ...........
Thermal Shock Test........... 40 ......... ...........
Impact Test.................. 39 ......... ...........
Product Flame Test........... 48 ......... ...........
Arc Ignition Test............ 51 ......... ...........
47Permit--Extension of TIme.......... ......... 91 ...........
48Permit Modification--Machine....... 47 ......... 100
48Permit MOdification--Instrument
(testing included).................. 47 ......... 100
------------------------------------------------------------------------
30 CFR Part 19--Electric Cap Lamps
------------------------------------------------------------------------
12Approval (testing included)........ 46 ......... 100
14Approval Extension (testing
included)........................... 46 ......... 100
40Stamped Notification Acceptance
Program (SNAP)...................... ......... 278 ...........
------------------------------------------------------------------------
30 CFR Part 20--Electric Mine Lamps
------------------------------------------------------------------------
12Approval (testing included)........ 44 ......... 100
14Approval Extension (testing
included)........................... 44 ......... 100
40Stamped Notification Acceptance
Program (SNAP)...................... ......... 278 ...........
------------------------------------------------------------------------
30 CFR Part 21--Flame Safety Lamps
------------------------------------------------------------------------
12Approval (testing included)........ 47 ......... 100
14Approval Extension (testing
included)........................... 47 ......... 100
40Stamped Notification Acceptance
Program (SNAP)...................... ......... 278 ...........
------------------------------------------------------------------------
30 CFR Part 22--Portable Methane Detectors
------------------------------------------------------------------------
12Approval (testing included)........ 48 ......... 100
14Approval Extension (testing
included)........................... 48 ......... 100
40Stamped Notification Acceptance
Program (SNAP)...................... ......... 278 ...........
------------------------------------------------------------------------
30 CFR Part 23--Telephones and Signaling Devices
------------------------------------------------------------------------
12Approval (testing included)........ 50 ......... 100
14Approval Extension (testing
included)........................... 50 ......... 100
40Stamped Notification Acceptance
Program (SNAP)...................... ......... 278 ...........
------------------------------------------------------------------------
30 CFR Part 24--Single Shot Blasting Units
------------------------------------------------------------------------
12Approval (testing included)........ 51 ......... 100
14Approval Extension (testing
included)........................... 51 ......... 100
40Stamped Notification Acceptance
Program (SNAP)...................... ......... 278 ...........
------------------------------------------------------------------------
30 CFR Part 26--Lighting Equipment for Illumination
------------------------------------------------------------------------
12Approval (testing included)........ 50 ......... 100
14Approval Extension (testing
included)........................... 50 ......... 100
40Stamped Notification Acceptance
Program (SNAP)...................... ......... 278 ...........
------------------------------------------------------------------------
30 CFR Part 27--Methane Monitoring Systems
------------------------------------------------------------------------
16Certification (testing included)... 51 ......... 100
18Certification Extension (testing
included)........................... 47 ......... 100
40Stamped Notification Acceptance
Program (SNAP)...................... ......... 278 ...........
------------------------------------------------------------------------
30 CFR Part 28--D.C. Current Fuses
------------------------------------------------------------------------
12Approval (testing included)........ 51 ......... 100
14Approval Extension (testing
included)........................... 51 ......... 100
40Stamped Notification Acceptance
Program (SNAP)...................... ......... 278 ...........
------------------------------------------------------------------------
30 CFR Part 29--Portable Dust Analyzers and Methane Monitors
------------------------------------------------------------------------
12Approval (testing included)........ 47 ......... 100
14Approval Extension (testing
included)........................... 47 ......... 100
40Stamped Notification Acceptance
Program (SNAP)...................... ......... 278 ...........
------------------------------------------------------------------------
30 CFR Part 31--Diesel Mine Locomotives
------------------------------------------------------------------------
12Approval........................... 46 ......... 100
14Approval Extension................. 46 ......... 100
------------------------------------------------------------------------
30 CFR Part 32--Mobile Diesel-Powered Equipment for Noncoal Mines
------------------------------------------------------------------------
12Approval........................... 46 ......... 100
14Approval Extension................. 46 ......... 100
16Certification Evaluation\2\........ 48 ......... 100
Certification Testing:
Emissions Test............... 51 ......... ...........
Pre/Post Test Preparation.... 49 ......... ...........
18Certification Extension
Evaluation\2\....................... 46 ......... 100
Certification Extension Testing:
Emissions Test............... 51 ......... ...........
Pre/Post Test Preparation.... 49 ......... ...........
------------------------------------------------------------------------
30 CFR Part 33--Dust Collectors
------------------------------------------------------------------------
12Approval Evaluation without
Certification of Performance\2\..... 49 ......... 100
Approval Testing:
Dust Collector Test.......... 51 ......... ...........
14Approval Extension Evaluation\2\... 49 ......... 100
Approval Extension Testing:
Dust Collector Test.......... 51 ......... ...........
16Certification Evaluation\2\........ 49 ......... 100
Certification Testing:
Dust Collector Test.......... 51 ......... ...........
18Certification Extension\2\......... 49 ......... 100
Certification Extension Testing:
Dust Collector Test.......... 51 ......... ...........
21Field Modification................. 49 ......... 100
29Dust Collector Approval with
Certification of Performance........ ......... 194 ...........
40Stamped Notification Acceptance
Program (SNAP)...................... ......... 278 ...........
------------------------------------------------------------------------
30 CFR Part 35--Fire-Resistant Hydraulic Fluids
------------------------------------------------------------------------
12Approval (testing included)........ 46 ......... 100
14Approval Extension (testing
included)........................... 45 ......... 100
------------------------------------------------------------------------
30 CFR Part 36--Mobile Diesel-Powered Equipment
------------------------------------------------------------------------
12Approval........................... 51 ......... 100
14Approval Extension................. 49 ......... 100
16Certification--Engine Evaluation\2\ 46 ......... 100
Certification--Engine Testing:
Emissions Test............... 48 ......... ...........
Explosion Test............... 50 ......... ...........
Surface Temperature/Safety
Controls Test............... 49 ......... ...........
Pre/Post Test Preparation.... 46 ......... ...........
18Certification Extension--Engine
Evaluation\2\....................... 46 ......... 100
Certification Extension--Engine
Testing:
Emissions Test............... 48 ......... ...........
Explosion Test............... 50 ......... ...........
Surface Temperature/Safety
Controls Test............... 49 ......... ...........
Pre/Post Test Preparation.... 46 ......... ...........
21Field Modification................. 49 ......... 100
27Certification--Diesel Components
Evaluation\2\....................... 47 ......... 100
Certification--Diesel Components
Testing:
Emission Test................ 48 ......... ...........
Explosion Test............... 50 ......... ...........
Water Consumption/Cooling
Efficiency Test............. 52 ......... ...........
Surface Temperature.......... 49 ......... ...........
Safety Control Test.......... 49 ......... ...........
Pre/Post Test Preparation.... 46 ......... ...........
28Certification Extension--Diesel
Components Evaluation\2\............ 47 ......... 100
Certification Extension--Diesel
Components Testing..............
Emission Test................ 48 ......... ...........
Explosion Test............... 50 ......... ...........
Water Consumption/Cooling
Efficiency Test............. 52 ......... ...........
Surface Temperature.......... 49 ......... ...........
Safety Control Test.......... 49 ......... ...........
Pre/Post Test Preparation.... 46 ......... ...........
40Stamped Notification Acceptance
Program (SNAP)...................... ......... 278 ...........
------------------------------------------------------------------------
30 CFR Part 74--Coal Mine Dust Personal Sampler Units
------------------------------------------------------------------------
12Approval........................... 47 ......... 100
00Other A&CC Services................
15Acceptance--Overcurrent Relays
(testing included).................. 46 ......... 100
15Statement of Test and Evaluation
(ST&E).............................. ......... 38 ...........
15Material Acceptance (testing
included)........................... 46 ......... 100
15Monitor and Power System (MAPS)
(testing included).................. 48 ......... 100
15Acceptance--Ground Check Monitor/
Ground Wire Devices (testing
included)........................... 46 ......... 100
17Acceptance Extension--Overcurrent
Relays.............................. 46 ......... 100
17Acceptable Extension--Interim
Criteria............................ 46 ......... 100
17Statement of Test and Evaluation
(ST&E) Extension.................... ......... 23 ...........
17Material Acceptance Extension
(testing included).................. 46 ......... 100
17Acceptance Extension--Ground Check
Monitor/Ground Wire Devices......... 46 ......... 100
20Stamped Revision Acceptance
(SRA)\3\............................ ......... 260 ...........
24Acceptance--Panic Bar.............. 46 ......... 100
33Generic Statement of Test and
Evaluation (ST&E)................... 47 ......... 100
35Administration Records Update...... 15 ......... NONE
37Acceptance--Interim Criteria\2\.... 46 ......... 100
Interim Criteria Testing:
Product Flame Test........... 48 ......... ...........
40Stamped Notification Acceptance
Program (SNAP)--Ground Check Monitor/
Ground Wire Device/Overcurrent Relay ......... 278 ...........
40Stamped Notification Acceptance
Program (SNAP) ST&E................. ......... 23 ...........
41Approval--Longwall Area Lighting... 48 ......... 100
42Approval Extension--Longwall Area
Lighting............................ 46 ......... 100
50Mine Wide Monitoring System (MWMS)
Evaluation.......................... 49 ......... 100
52Mine Wide Monitoring System (MWMS)
Barrier Classification.............. ......... 179 ...........
54Mine Wide Monitoring System (MWMS)
Sensor Classification............... ......... 261 ...........
00Retesting for Approval as a Result
of Post-Approval Product Audit\4\... ......... ......... ...........
------------------------------------------------------------------------
\1\Electric motor assemblies final rule was issued February 22, 1993.
The phase-in period for this program is 3 years.
\2\Full approval fee consists of evaluation cost plus applicable test
costs.
\3\Fee covers SRA application accompanied by up to five documents.
\4\Fee based upon the approval schedule in effect at the time of retest.
Note: When testing and evaluation are required at locations other than
MSHA's premises, the applicant shall reimburse MSHA for traveling,
subsistence, and incidental expenses of MSHA's representation in
accordance with standardized government travel regulations. This
reimbursement is in addition to the fees charged for evaluation and
testing.
[FR Doc. 94-31592 Filed 12-22-94; 8:45 am]
BILLING CODE 4510-43-P