[Federal Register Volume 59, Number 242 (Monday, December 19, 1994)]
[Unknown Section]
[Page 0]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 94-31085]


[[Page Unknown]]

[Federal Register: December 19, 1994]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration

 

Proposed Advisory Circular 21-20B; Supplier Surveillance 
Procedures

AGENCY: Federal Aviation Administration (FAA) DOT.

ACTION: Notice of availability.

-----------------------------------------------------------------------

SUMMARY: This notice announces the availability of proposed Advisory 
Circular (AC) 21-20B, Supplier Surveillance Procedures, for review and 
comments. The proposed AC 21-20B provides information and guidance 
concerning an acceptable means, but not the only means, of 
demonstrating compliance with the requirements of the Federal Aviation 
Regulations (FAR) Part 21, Certification Procedures for Products and 
Parts.

DATES: Comments submitted must identify the proposed AC 21-20B File 
Number A-230-94-018, and be received by March 21, 1995.

ADDRESSES: Copies of the proposed AC 21-20B can be obtained from and 
comments may be returned to the following: Department of 
Transportation, Federal Aviation Administration, Aircraft Certification 
Service, Production and Airworthiness Certification Division, Policy 
and Procedures Branch, AIR-230, 800 Independence Avenue SW., 
Washington, DC 20591.

FOR FURTHER INFORMATION CONTACT:
Randy Courtney, Federal Aviation Administration, Production and 
Airworthiness Certification Division, Policy and Procedures Branch, 
AIR-230, Room 815, 800 Independence Avenue SW., Washington, DC 20591, 
at telephone number (202) 267-8361.

SUPPLEMENTARY INFORMATION:

Background

    The proposed AC 21-20B provides information and guidance concerning 
surveillance of suppliers to U.S. production approval holders (PAH) by 
the PAH and the Federal Aviation Administration. Further, this AC 
includes procedures which supplement bilateral airworthiness agreements 
pertaining to certification of components manufactured outside the 
United States.

Comments Invited

    Interested persons are invited to comment on the proposed AC 21-
20B, listed in this notice, by submitting such written data, views, or 
arguments, as they desire, to the aforementioned specified address. All 
communications received on or before the closing date for comments, 
specified above, will be considered by the Director of the Aircraft 
Certification Service before issuing the final AC.
    Comments received on the proposed AC 21-20B may be examined before 
or after the comment closing date in Room 815, FAA Headquarters 
Building (FOB-10A), 800 Independence Avenue, S.W., Washington, DC 
20591, between 8:00 a.m. and 4:00 p.m. on weekdays, except Federal 
holidays.

    Issued in Washington, DC on November 29, 1994.
Joyce A. Eaton,
Acting Manager, Production and Airworthiness Certification Division.
[FR Doc. 94-31085 Filed 12-16-94; 8:45 am]
BILLING CODE 4910-13-M