[Federal Register Volume 59, Number 98 (Monday, May 23, 1994)]
[Unknown Section]
[Page 0]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 94-12475]


[[Page Unknown]]

[Federal Register: May 23, 1994]


-----------------------------------------------------------------------

DEPARTMENT OF DEFENSE
[OPPTS-59980; FRL-4865-3]

 

Certain Chemicals; Premanufacture Notices

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: Section 5(a)(1) of the Toxic Substances Control Act (TSCA) 
requires any person who intends to manufacture or import a new chemical 
substance to submit a premanufacture notice (PMN) to EPA at least 90 
days before manufacture or import commences. Statutory requirements for 
section 5(a)(1) premanufacture notices are discussed in the final rule 
published in the Federal Register of May 13, 1983 (48 FR 21722). In the 
Federal Register of November 11, 1984, (49 FR 46066) (40 CFR 723.250), 
EPA published a rule which granted a limited exemption from certain PMN 
requirements for certain types of polymers. Notices for such polymers 
are reviewed by EPA within 21 days of receipt. This notice announces 
receipt of 11 such PMN(s) and provides a summary of each.

DATES: Close of review periods:
    Y 94-75, 94-76, April 3, 1994.
    Y 94-77, 94-78, April 4, 1994.
    Y 94-79, 94-80, April 11, 1994.
    Y 94-81, 94-82, April 12, 1994.
    Y 94-83, 94-84, April 20, 1994.
    Y 94-85, April 28, 1994.

FOR FURTHER INFORMATION CONTACT: Susan B. Hazen, Director, 
Environmental Assistance Division (4708), Office of Pollution 
Prevention and Toxics, Environmental Protection Agency, Rm. E-545, 401 
M St., SW., Washington, DC, 20460 (202) 554-1404, TDD (202) 554-0551.

SUPPLEMENTARY INFORMATION: The following notice contains information 
extracted from the nonconfidential version of the submission provided 
by the manufacturer on the PMNs received by EPA. The complete 
nonconfidential document is available in the TSCA Nonconfidential 
Information Center (NCIC), NEM-B607 at the above address between 12 
noon and 4 p.m., Monday through Friday, excluding legal holidays.

    Manufacturer.  Confidential.
    Chemical. (G) Carboxylic acid copolymer.
    Use/Production. (G) Open, non-dispersive use. Prod. range: 
Confidential.
    Manufacturer.  Confidential.
    Chemical. (G) Carboxylic acid copolymer.
    Use/Production. (G) Coating binder/generic and coating additive/
generic industrial. Prod. range: Confidential.
    Importer.  Confidential.
    Chemical. (G) Styrenated acrylic copolymer.
    Use/Production. (G) Paint. Import. range: Confidential.
    Importer.  Confidential.
    Chemical. (G) Styrenated acrylic copolymer.
    Use/Production. (G) Paint. Import. range: Confidential.
    Manufacturer.  Hoechst Celanese Corporation.
    Chemical. (G) Carbomonocyclic carbopolycyclic polyester.
    Use/Production. (S) Injection - molded parts. Prod. range: 
Confidential.
    Manufacturer.  Hoechst Celanese Corporation.
    Chemical. (G) Carbomonocyclic carbopolyclic polyester.
    Use/Production. (S) Injection - molded. Prod. range: Confidential.
    Manufacturer.  Confidential.
    Chemical. (G) Polyurethane dispersion.
    Use/Production. (G) Adhesive for automobile assembly manufacture. 
Prod. range: Confidential.
    Manufacturer.  Confidential.
    Chemical. (G) Fatty acid, modified isophthalate polyester polymer.
    Use/Production. (S) Binder for industrial. Prod. range: 
Confidential.
    Manufacturer.  Ricon Resins, Inc.
    Chemical. (S) (1,3-Dihydroxypropyl-2' methylpropenate) monoester of 
maleic anhydride adducted polybutadiene (hydroxy propyl methacrylated).
    Use/Production. (S) Coating moisture resistant for metal curative 
for rubber, adhesion, promoter for rubber and protection coating for 
polymers electronic encapsulant. Prod. range: 1,000-10,000 kg/yr.
    Importer.  Confidential.
    Chemical. (G) Polyurethane/acrylic grafted copolymers, dimethylanol 
salt.
    Use/Production. (G) Paint. Import. range: Confidential.
    Manufacturer.  E. I. du Pont de Nemours & Company, Inc.
    Chemical. (G) Polyimide.
    Use/Production. (G) Molding resin. Prod. range: Confidential.

List of Subjects

    Environmental protection, Premanufacture notification.

Dated: May 12, 1994.

Frank V. Caesar,

Acting Director, Information Management Division, Office of Pollution 
Prevention and Toxics.

[FR Doc. 94-12475 Filed 5-20-94; 8:45 am]
BILLING CODE 6560-50-F