[Federal Register Volume 59, Number 79 (Monday, April 25, 1994)]
[Unknown Section]
[Page 0]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 94-9917]


[[Page Unknown]]

[Federal Register: April 25, 1994]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

National Highway Traffic Safety Administration
[Docket No. 94-24; Notice 1]

 

Receipt of Petition for Determination That Nonconforming 1987 
Alfa Romeo Spider Passenger Cars Are Eligible for Importation

AGENCY: National Highway Traffic Safety Administration, DOT.

ACTION: Notice of receipt of petition for determination that 
nonconforming 1987 Alfa Romeo Spider passenger cars are eligible for 
importation.

-----------------------------------------------------------------------

SUMMARY: This notice requests comments on a petition submitted to the 
National Highway Traffic Safety Administration (NHTSA) for a 
determination that a 1987 Alfa Romeo Spider passenger car that was not 
originally manufactured to comply with all applicable Federal motor 
vehicle safety standards is eligible for importation into the United 
States because it is substantially similar to a vehicle that was 
originally manufactured for importation into and sale in the United 
States and that was certified by its manufacturer as complying with the 
safety standards, and it is capable of being readily modified to 
conform to the standards.

DATES: The closing date for comments on the petition is May 25, 1994.

ADDRESSES:  Comments should refer to the docket number and notice 
number, and be submitted to: Docket Section, room 5109, National 
Highway Traffic Safety Administration, 400 Seventh Street, SW., 
Washington, DC 20590. [Docket hours are from 9:30 a.m. to 4 p.m.].

FOR FURTHER INFORMATION CONTACT: Ted Bayler, Office of Vehicle Safety 
Compliance, NHTSA (202-366-5306).

SUPPLEMENTARY INFORMATION:

Background

    Under section 108(c)(3)(A)(i) of the National Traffic and Motor 
Vehicle Safety Act (the Act), 15 U.S.C. 1397(c)(3)(A)(i), a motor 
vehicle that was not originally manufactured to conform to all 
applicable Federal motor vehicle safety standards shall be refused 
admission into the United States on and after January 31, 1990, unless 
NHTSA has determined that the motor vehicle is substantially similar to 
a motor vehicle originally manufactured for importation into and sale 
in the United States, certified under section 114 of the Act, and of 
the same model year as the model of the motor vehicle to be compared, 
and is capable of being readily modified to conform to all applicable 
Federal motor vehicle safety standards.
    Petitions for eligibility determinations may be submitted by either 
manufacturers or importers who have registered with NHTSA pursuant to 
49 CFR part 592. As specified in 49 CFR 593.7, NHTSA publishes notice 
in the Federal Register of each petition that it receives, and affords 
interested persons an opportunity to comment on the petition. At the 
close of the comment period, NHTSA determines, on the basis of the 
petition and any comments that it has received, whether the vehicle is 
eligible for importation. The agency then publishes this determination 
in the Federal Register.
    Champagne Imports, Inc. of Lansdale, Pennsylvania (``Champagne'') 
(Registered Importer R-90-009) has petitioned NHTSA to determine 
whether 1987 Alfa Romeo Spider passenger cars are eligible for 
importation into the United States. The vehicle which Champagne 
believes is substantially similar is the 1987 Alfa Romeo Spider that 
was manufactured for importation into and sale in the United States, 
and certified by its original manufacturer as conforming to all 
applicable Federal motor vehicle safety standards.
    The petitioner states that it carefully compared the non-U.S.-
certified 1987 Alfa Romeo Spider to its U.S.-certified counterpart, and 
found the two vehicles to be substantially similar with respect to 
compliance with most applicable Federal motor vehicle safety standards.
    Champagne submitted information with its petition intended to 
demonstrate that the non-U.S.-certified 1987 Alfa Romeo Spider, as 
originally manufactured, conforms to many Federal motor vehicle safety 
standards in the same manner as its U.S.-certified counterpart, or is 
capable of being readily modified to conform to those standards.
    Specifically, the petitioner claims that the non-U.S. certified 
1987 Alfa Romeo Spider is identical to its U.S.-certified counterpart 
with respect to compliance with Standard Nos. 102 Transmission Shift 
Lever Sequence. * * *, 103 Defrosting and Defogging Systems, 104 
Windshield Wiping and Washing Systems, 105 Hydraulic Brake Systems, 106 
Brake Hoses, 107 Reflecting Surfaces, 109 New Pneumatic Tires, 113 Hood 
Latch Systems, 116 Brake Fluid, 124 Accelerator Control Systems, 201 
Occupant Protection in Interior Impact, 202 Head Restraints, 203 Impact 
Protection for the Driver From the Steering Control System, 204 
Steering Control Rearward Displacement, 205 Glazing Materials, 206 Door 
Locks and Door Retention Components, 207 Seating Systems, 209 Seat Belt 
Assemblies, 210 Seat Belt Assembly Anchorages, 211 Wheel Nuts, Wheel 
Discs and Hubcaps, 212 Windshield Retention, 216 Roof Crush Resistance, 
219 Windshield Zone Intrusion, and 302 Flammability of Interior 
Materials.
    Petitioner also contends that the 1987 Alfa Romeo Spider is capable 
of being readily modified to meet the following standards, in the 
manner indicated:
    Standard No. 101 Controls and Displays: (a) Substitution of a lens 
marked ``Brake'' for a lens with an ECE symbol on the brake failure 
indicator lamp; (b) installation of a seat belt warning lamp that 
displays the seat belt symbol; (c) recalibration of the speedometer/
odometer from kilometers to miles per hour.
    Standard No. 108 Lamps, Reflective Devices and Associated 
Equipment: (a) Installation of U.S.-model headlamp assemblies with 
sealed beam headlamps and front side markers; (b) installation of U.S.-
model tail lamp assemblies with rear side markers; (c) installation of 
a high-mounted stop lamp.
    Standard No. 110 Tire Selection and Rims: installation of a tire 
information placard.
    Standard No. 111 Rearview Mirrors: replacement of the passenger 
side rearview mirror, which is convex but lacks the required warning 
statement.
    Standard No. 114 Theft Protection: installation of a buzzer 
microswitch in the steering lock assembly, and a warning buzzer.
    Standard No. 115 Vehicle Identification Number: installation of a 
VIN plate that can be read from outside the left windshield pillar, and 
a VIN reference label on the edge of the door or latch post nearest the 
driver.
    Standard No. 118 Power-Operated Window Systems: rewiring of the 
power window system so that the window transport is inoperative when 
the ignition is switched off.
    Standard No. 208 Occupant Crash Protection: (a) Installation of 
either a U.S.-model seat belt in the driver's position or a belt 
webbing-actuated microswitch in the driver's seat belt retractor; (b) 
installation of an ignition switch-actuated seat belt warning lamp and 
buzzer.
    Standard No. 214 Side Impact Protection: installation of 
reinforcing beams in the side doors.
    Standard No. 301 Fuel System Integrity: installation of a rollover 
valve in the fuel tank vent line between the fuel tank and the 
evaporative emissions collection canister.
    Additionally, the petitioner states that the bumpers on the non-
U.S.-certified 1987 Alfa Romeo Spider must be reinforced to comply with 
the Bumper Standard found in 49 CFR part 581.
    Interested persons are invited to submit comments on the petition 
described above. Comments should refer to the docket number and be 
submitted to: Docket Section, National Highway Traffic Safety 
Administration, room 5109, 400 Seventh Street, SW., Washington, DC 
20590. It is requested but not required that 10 copies be submitted.
    All comments received before the close of business on the closing 
date indicated above will be considered, and will be available for 
examination in the docket at the above address both before and after 
that date. To the extent possible, comments filed after the closing 
date will also be considered. Notice of final action on the petition 
will be published in the Federal Register pursuant to the authority 
indicated below.

    Authority: 15 U.S.C. 1397(c)(3)(A)(i)(I) and (C)(ii); 49 CFR 
593.8; delegations of authority at 49 CFR 1.50 and 501.8.

    Issued on: April 18, 1994.
William A. Boehly,
Associate Administrator for Enforcement.
[FR Doc. 94-9917 Filed 4-22-94; 8:45 am]
BILLING CODE 4910-59-M