[Federal Register Volume 59, Number 63 (Friday, April 1, 1994)]
[Unknown Section]
[Page 0]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 94-7787]


[[Page Unknown]]

[Federal Register: April 1, 1994]


-----------------------------------------------------------------------


DEPARTMENT OF TRANSPORTATION
14 CFR Part 39

[Docket No. 91-CE-88-AD; Amendment 39-8819; AD 94-04-01]

 

Airworthiness Directives: de Havilland DHC-6 Series Airplanes; 
Correction

AGENCY: Federal Aviation Administration, DOT.

ACTION: Final rule; correction.

-----------------------------------------------------------------------

SUMMARY: This action makes a correction to Airworthiness Directive (AD) 
94-04-01 concerning de Havilland DHC-6 series airplanes, which was 
published in the Federal Register on February 10, 1994 (59 FR 6216). 
That publication incorrectly references replacement front steel adapter 
fittings as part number (P/N) C6WM1163-4 instead of P/N C6WM1162-4 in 
paragraphs (b) and (c) of the AD. This action changes the AD to 
correctly identify the part numbers of these front wing steel adapter 
fittings.

EFFECTIVE DATE: March 31, 1994.

FOR FURTHER INFORMATION CONTACT: Jon Hjelm, Aerospace Engineer, FAA, 
New York Aircraft Certification Office, 181 South Franklin Avenue, room 
202, Valley Stream, New York 11581; telephone (516) 791-6220.

SUPPLEMENTARY INFORMATION: On February 3, 1994, the Federal Aviation 
Administration (FAA) issued AD 94-04-01, Amendment 39-8819 (59 FR 
6216), which applies to de Havilland DHC-6 series airplanes. This AD 
requires repetitively inspecting wing attachment fittings, and 
eventually installing new steel adapter fittings as terminating action 
for those repetitive inspections. The AD incorrectly references 
replacement front steel adapter fitting part numbers.

Need for Correction

    As published, the final regulations incorrectly reference 
replacement front steel adapter fittings as P/N C6WM1163-4 instead of 
P/N C6WM1162-4 in paragraphs (b) and (c) of the AD 94-04-01. This could 
cause confusion when obtaining the proper parts to incorporate the 
required modification.

Correction of Publication

    Accordingly, the publication of February 10, 1994 (59 FR 6216) of 
Amendment 39-8819, AD 94-04-01, which was the subject of FR Doc. 94-
3048, is corrected as follows:


Sec. 39.13  [Corrected]

    On page 6216, in the third column, in Sec. 39.13, in the fifth line 
of paragraph (b) of AD 94-04-01, replace:

    ``3 and C6WM1163-4 in accordance with the''

with:
    ``3 and C6WM1162-4 in accordance with the''

    On page 6217, in the first column, in Sec. 39.13, in the seventh 
line of paragraph (c) of AD 94-04-01, replace:

    ``N C6WM1162-3 and C6WM1163-4, in''

with:

    ``N C6WM1162-3 and C6WM1162-4, in''

    Issued in Kansas City, Missouri, on March 28, 1994.
Barry D. Clements,
Manager, Small Airplane Directorate, Aircraft Certification Service.
[FR Doc. 94-7787 Filed 3-31-94; 8:45 am]
BILLING CODE 4910-13-U